Appreciation for the Explorer
-
@Lynn LeFey said:
@Lynn LeFey said:
I'm seriously considering switching to the Explorer as my EDC SAK. My eyes are getting old.

The Explorer would be a great edc Lynn.

The mag glass and inline Phillips are really worth it!
Yep. It's official. I swapped out my Stay Glow Super Tinker for my Explorer (one with the old style mag glass).
Now, I'm just trying to figure out what cool scales I want to put on it. I put the Stay Glow on the Super Tinker, and those are cool. Now I'm just trying to think of how to best personalize the Explorer. Both the G10 and solid copper Swiss Bianco scales are very cool, but I'm also considering Emerald Plus scales.
Congratulations on your decision! How about silvertech?
[It's not failure if you learn something from it]
-
@Lynn LeFey said:
Yep. It's official. I swapped out my Stay Glow Super Tinker for my Explorer (one with the old style mag glass).Now, I'm just trying to figure out what cool scales I want to put on it. I put the Stay Glow on the Super Tinker, and those are cool. Now I'm just trying to think of how to best personalize the Explorer. Both the G10 and solid copper Swiss Bianco scales are very cool, but I'm also considering Emerald Plus scales.
The emerald plus scales are nice! I have an Explorer and a Swisschamp with them on as well as a backup set! :) First pic is the Explorer!


-
@Thunderpants said:
Gotta tell the postman to stop dumping this stuff in my letter box....Absolutelly right!

*PM sent, use my address from now on to avoid this again. No need to thank me.
*
-
I'm carrying the Compact because it can pretty much do the same as the Climber and is lighter. But the real phillips + lens on the Explorer is making me wanting to try it on... even if it means doubling the weight on my EDC SAK.

-
Some of you may know I recently acquired Lynn LeFey's budget $10 challenge Explorer. Not a bad little knife. Always wanted one. 30 years ago when I bought my Super Tinker, I only bought it because the store didn't have the Explorer in stock, Amazon didn't exist yet, and I needed to get to an archaeological dig that week.
My significant other, who is fresh back from the Galapagos, saw the pictures of the Explorer and had an " oooh, I want ooooone" moment. So that was earmarked before it got here. Her daughter, who likes to camp and hike, felt left out. Plus I still wanted one. So I put an all call for tools wanted, and checked eBay as well.
Two arrived a couple days ago and I began inspection and cleaning. These two include the back spring hook.
One arrived today, of a vintage without the hook - my preferred type.
I did notice a different tool stacking sequence in the non- hook tool versus the hooked one's.
The ones with the hook, layers right to left are: 1) blades, 2) scissors, 3) magnifier/ Phillips, and then 4) opener layer.
The one without the hook, layers right to left are: 1) blades, 2) magnifier/Phillips, 3) scissors, 4) opener layer.
It may have something to do with the fact that the snap ring receiver went from a shim at the blade layer to a backspring layer filling at the opener layer.
-
So, this non-hook Explorer came in its box. A lovely burgundy color, with a near paper thin plastic slide out tray, form fitted to the knife with some faux felt finish. I pulled the knife out and set it aside.
Then, I pulled the form fitted insert out of the paperboard slider. Underneath, I found the yellow, single page Victorinox "congratulations on your purchase" form, printed in green ink.
Underneath that, I found a note. It had been hand written in pencil on a white note paper, which had been torn to fit the box. On the paper was hand written in cursive:
"from Uncle Barney Wallis(s?)
6-27-87 for High School graduation"What luck! Now I had a note that dated the knife very well, and I hadn't even really inspected the knife yet. It has the cap lifer half stop, but the flouted corkscrew. It has the "Rostfrei" the bow, and the cross stamps on either sides of the tang, and has no parcel hook. The scissors pivot is a screw, and the magnifier is grey-rimmed glass.
But one of the best dating mechanisms I found, was the box itself. The white paperboard slide-out tray has on the bottom of it, stamped (embossed, no ink) an "84"
So this thing Sat on a shelf for three years after manufacture, before it was finally purchased and given as a gift, to someone who used it a while, didn't really care for it, put it in the box, which in turn went into a drawer, where it sat until sold to me.
I'm inspecting and cleaning it now. Anyone else with a mid- eighties Explorer notice the difference in tool stack sequence versus the post 91's?
-
Is the philips still magnetized? ???
[/quote]Still magnetized. It picks up the mini screwdriver.
-
@Douglas said:

Just got a beautiful 80's prehook. :D
Got to give this baby a workout... I don't think its seen much action.
I'll have to fix that.
Nice one Doug! I just got one used with box and paperwork. Also pre-hook, early to mid 80's, but has the eye in the awl. The tool stack sequence is different on these compared to ones with the hook.
I will be placing my 30 year old Super Tinker on the workbench, in a state of semi-retirement and begin carrying my Explorer and Pioneer daily
-
@sir_mike said:
I love the Explorer but have a hard time with pocket carry as the four layers make it tough so I normally carry the Super Tinker instead. I wish I could get by that and maybe if I carried it more, I would get used to it. It has the tools I need as I really use the mag glass quite often.Maybe I need a custom with the opener layer, blade and mag. glass/inline philips! That would get me to three layers! :D
Hi Mike
I carried the Super Tinker for the last 30 years. Great knife. I finally got an Explorer and I think the extra layer on it is something I can deal with. Thinner than a Tinker Deluxe!
-
Had to swap out the license plate on the wifey's SUV so I used my EDC Explorer for the job! Love the inline philips and I couldn't have done it with a back philips! Just sayin' :)

-
-
@El Corkscrew said:

Thanks El C!

-
Exploring how to tackle this orange glazed cinnamon roll, mmmmm
-
I'm a big Woodsman fan but there's a soft spot for the Explorer with its opposing magnifier and Phillips, one of the features I value most on the five Woodsman, two Champions and two Scientists along with the Swiss Champ in the stables.
Got this red Explorer Plus and added it to the stables . . .

Wanted to do something special with it to distinguish it from the others with magnifiers and Phillips so I put these nice titanium scales on it to dress it up and have something different.

Turned out much better than I had anticipated and I'm extremely pleased with the result.
John
-
@jalind said:
I'm a big Woodsman fan but there's a soft spot for the Explorer with its opposing magnifier and Phillips, one of the features I value most on the five Woodsman, two Champions and two Scientists along with the Swiss Champ in the stables.Got this red Explorer Plus and added it to the stables . . .

Wanted to do something special with it to distinguish it from the others with magnifiers and Phillips so I put these nice titanium scales on it to dress it up and have something different.

Turned out much better than I had anticipated and I'm extremely pleased with the result.
John
Do you make your own scales btw?
~ if you're not good, be creative ~
-
I'm a big Woodsman fan but there's a soft spot for the Explorer with its opposing magnifier and Phillips, one of the features I value most on the five Woodsman, two Champions and two Scientists along with the Swiss Champ in the stables.
Got this red Explorer Plus and added it to the stables . . .

Wanted to do something special with it to distinguish it from the others with magnifiers and Phillips so I put these nice titanium scales on it to dress it up and have something different.

Turned out much better than I had anticipated and I'm extremely pleased with the result.
John
Do you make your own scales btw?
~ if you're not good, be creative ~
No, I don't. I would except I don't have the tooling or time to create the precision tooling for making wood scales, and don't have the machine shop equipment to make metal ones. Swiss Bianco had these made a couple years ago along with some copper ones in a slightly different design. Had them for sale on his site and on eBay. Snagged one set of each while they were available. Put the copper ones on a Tinker.
John
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login