I'm cool now.... sort of...
-
Here are some weights for you guys.
And a Core because it was easily at hand.

There are several plausible explanations.
- I may have a pair of fakes on my hands as mine looks awfully similar to Def's. If this is the case, I won't be all that happy with the retail store that sold me the first one. I have a hard time thinking this is the case because manufacturing is top notch and finish is equally so. You don't see this from folks trying to make maximum bucks in knocking off a product. But who knows in the end?
- Possible that Leatherman made changes from the first production run to the next. This would mean that both of mine are originals to the manufacturer. This wouldn't be the first time that something like this has happened with Leatherman. Maybe they found that the newer system provides the same benefits with possibly some savings in manufacture. I have no clue to be honest. I wasn't even aware there were links with shoulders out there.
If number 2 is the case, I won't see the need to try and hunt down one of the original production run Treads.
-
Thanks Chako for adding to the discussion and great photos as always
. I got mine second hand but the guy I got it from got it from a Leatherman retailer. I do believe collars on the first run Treads was the initial design and later iterations without collars is now the norm. These are my thoughts since I am fairly certain my Tread is legit. -
That makes sense. I didn't exactly buy one when it first came out. My two are identical and appear to be well made and finished.
-
I still have not actually used this monstrosity for anything.

I absolutely still want one, and preferably an early one with collars, barrels, bumps, whatever we want to call them, even though I am seriously doubting the actual usefulness of it.
Def
-
It's use is as a conversation piece.
-
And it looks cool as a watchband [emoji106]
Sent fra min PLK-L01 via Tapatalk
-
@Grant Lamontagne said:
I still have not actually used this monstrosity for anything.
I absolutely still want one, and preferably an early one with collars, barrels, bumps, whatever we want to call them, even though I am seriously doubting the actual usefulness of it.
Def
It's not bad when you have no other drivers on you but it falls short compared to everything else out there. I'm carrying the new LT a lot and so far not much action, lots of people tell me it's cool. :-[
-
Does LT stand for Ladies Tool?

I finally had an opportunity to use the (fake) Tread today. One of my tail lights blew with the cold weather we have had recently and I decided today was the day to replace it. All I needed was a screwdriver, right?

The screws are not what I would call recessed, but they apparently are slightly, but enough that the (fake)Tread just barely reached them. I would consider them more countersunk than recessed, but either way the Tread just barely reached them. I don't believe the real Tread's drivers have any more reach than this one's, so I don't think we can blame this on the quality of the fake.

Further I found there to be such little leverage on the screwdriver that it was awkward to turn. I suppose it could be done, but it wouldn't be my first choice. By far. In fact, the Tread did such a wonderful job that this is the way I ended up doing it.


Def
-
I finally have a real Tread on the way, and guess what? It is also BO, so it will be a good comparison against my fake Tread.
The thing is, I really haven't found a use for the fake Tread yet, and I am not sure I am going to find much of a use for the real one either. My problems with the fake aren't anything to do with build quality or anything else that you would associate with fakes vs real, it's that in the past few months I really haven't found anything to use the fake on that would give me an accurate gauge of its abilities, and I feel like the real one isn't going to be any better- and worse, not 4-5 times better, which is about how much I sunk into it.

Chances are the real Tread will end up in The Multitool.org Store after testing and comparison to the fake, unless of course it meets at least one of the following criteria:
1- It is somehow superior enough to the fake that it earns it's way into my collection.
2- It is an older version with the barrels (as seen above, and in the below photo- basically if it looks like the silver one and not the black one)
That having been said, I am looking forward to the comparison, as this is an informational site first and foremost, and identifying the differences so that people can spot the fakes is of primary importance. I really wouldn't want members (or anyone else) to inadvertently buy a fake, especially not at real prices. :ahhh
Def
-
Can't wait to see the comparison of the two

-
Me too. I'm really looking forward to seeing what the differences are.
Def
-
I've seen some suspiciously looking Treads for sale localy at half the price of a retailer's...
-
I'd be lying if I said the idea hadn't crossed my mind, but then my integrity is worth more than That, even though I would have clearly labelled them as fakes.
Def
-
Absolutely.
Folks know where to get the cheap knockoffs if they want them- they don't need to spend the extra $$ that I'd have to charge to resell them and/maintain an inventory.
Def
-
The real Tread arrived last night and I have been looking over the two of them since (with a short break to sleep!) and I really am astounded. This is going to be a hell of a comparison, and one really has to look deep to find the differences. The packaging is almost identical, and the differences in the product are very subtle!
In fact, just to ensure they don't get mixed up, I have had to do the reverse link mod on the fake! :ahhh
Pictures etc soon....
Def
-
@Grant Lamontagne said:
The real Tread arrived last night and I have been looking over the two of them since (with a short break to sleep!) and I really am astounded. This is going to be a hell of a comparison, and one really has to look deep to find the differences. The packaging is almost identical, and the differences in the product are very subtle!In fact, just to ensure they don't get mixed up, I have had to do the reverse link mod on the fake! :ahhh
Pictures etc soon....
Def
Are you sure you haven't mixed them up already :D
-
@Grant Lamontagne said:
The real Tread arrived last night and I have been looking over the two of them since (with a short break to sleep!) and I really am astounded. This is going to be a hell of a comparison, and one really has to look deep to find the differences. The packaging is almost identical, and the differences in the product are very subtle!
In fact, just to ensure they don't get mixed up, I have had to do the reverse link mod on the fake! :ahhh
Pictures etc soon....
Def
Are you sure you haven't mixed them up already :D
You joke about that, but it is harder than you'd think to keep them straight. But, I found a few telltale signs, although some of them will surprise you....
Def
-
Just to recap....
Months ago I bought a fake Leatherman Tread in black for $50. Now I have a legitimate Leatherman Tread, also in black, and while I aid considerably less than the $312.00 price tag on it, you can rest assured that it was still several times as much as the fake. But, it's worth it for the real thing, right? After all, the Leatherman brand is built in the USA and quality is the defining factor, while the knockoff is.... well, it's a cheap hunk of China made crap, right? Let's find out.
First off, let me once again point out that while it has been a very successful model for Leatherman, I am not a big an of the Tread. I want good, solid, real tools from Leatherman and this seems like an overpriced gadget, designed to generate hype in a brand that has lately not given us much in the way of cool new, solid, real tools to rave about. That having been said, if I was really that disinterested, I would not have bought either a fake or a real one, so that proves that there is something pervasive about it. Or, I'm a junkie.
The first thing you notice is the box- it will take a very close observation to spot what is wrong here.

The real Tread is on the left and the fake is on the right. Notice that the colors on the fake are brighter and that the image is slightly larger. These are not differences you are likely to notice without having the real one to compare to, but you can also see that the image and logo are slightly off center on the fake box, and perfectly centered on the real one. I will admit that I didn't notice the offset logo on the fake until both boxes were side by side and Megan pointed it out.
The end panels of the boxes are virtually identical as well, with the real box having slightly smaller Leatherman brandings than the fake, although again this is not something one would notice without having both for comparison.

Flipping the boxes over we see that the real box (again on the left) is virtually identical to the fake one. In this case there has been a bar code and price tag added to the real one, but I am not sure at what point they were added, and so I wouldn't count on that as an identifier. Both have trademark info, although it does slightly differ- however one is marked 2015 and one 2016, and as any collector knows, the wording and placement of these types of marks often change from year to year on legitimate products, and so should not be considered an identifier either.

Opening the box we see the presentation is virtually identical. To make it easier to identify the fake, I have added some green paint to the logos and reversed the connecting links everywhere except where the ones between the strap cutter and the clasp, because the links impact the cutter ends when inverted. Everywhere else they seem to be fin when inverted.

Pulling the Treads out of the box gives us another clue as to which one is real and which one is fake. The real Tread fits perfectly onto the elongated foam oval while the fake sort of sits loosely on it's shorter, fatter one. The real one seems more like it was designed to fit (which it was) while the fake appears to have been a setup for another product (possibly a fake watch or different bracelet) that was used out of convenience. The foam in the real Tread box is also much more dense than the cheaper foam found in the fake. If you can gain access to the inside of the packaging, this should be one of the first telltale signs of whether the Tread you are buying is real or not.

Getting rid f the packaging, the two Treads look and feel remarkably similar. They move the same and the finish is almost identical. At first glance they are almost impossible to tell apart. If you are one of those people that can look at the above photo and claim to instantly know the difference without the cues I have offered (links and paint) then I suggest you chalk that up to my poor photography skills. I have been spotting fakes and working with companies to identify them for about twenty years now, and I see no appreciably difference in finishes or feel.

Ordinarily the various bits aren't as well formed or the assembly is substandard, but in this case there is very little to distinguish the fake rom the real thing. The cutouts and screwdriver ends are just as precise as the real McCoy.
I mentioned above the discoloration on the sides of some of the links, and if you look at the above pic you see the Leatherman also suffers from the same issue, only not as pronounced. I am assuming both use a similar process to blacken, however Leatherman either uses a slightly better version of the process, or merely has a more skilled person doing it. I'm not sure this would be an indicator on a natural stainless finish, butt it certainly is obvious on the black version.

It is also possible that the fake uses a lower grade of steel, which may be evidenced by a lower density, so I put both on the scale to see how they stacked up. As you can see, there is a slight variance in weight- 1 gram to be exact.

I wouldn't count that as an indicator either- for those not familiar with the metric system, 1 gram is a drop of water. It is a negligible amount and my scale could easily vary by a gram from one item to another... and in fact the difference may be even smaller, as my scale won't do portions of a gram, meaning one may have been 173.6g and the other 173.4g, and both were rounded off. It is such a small variance that I'm sure any two legitimate Treads fresh off the assembly line would vary by this much or more.
Getting into the nuts and bolts of it (literally) we can see another noticeable difference- the screws for the real Tread are only black on the head and neck, while the threads are left uncoated while the fake one is black all the way down. I would imagine that Leatherman doesn't coat the threads because of concerns of shed paint gumming them up. But, the process of only coating half of a screw that is about a quarter of an inch long takes some effort, which is probably why that's one of the corners that the knockoff manufacturer cut. You can see that the real Tread's screw is also slightly more robust, and it will not fit in the hole on the fake, while the fake screws can turn awkwardly into the holes in the real Tread.
The connecting links themselves are also interesting. They are almost identical, except the finish on one seems a bit better able to withstand use while the other seems to rub off a bit. What might surprise you is that the one that has the finish removed in the above picture is the brand new in box, still factory sealed until I got it and handled it enough to take these photos, while the finish on the fake still looks perfect despite a few months of wear.
The same goes for the other side of the connecting link, and if there was any doubt about which one was which (maybe I confused them at some point) I would like you to have a look at the Tread itself:
Even though my camera focused on the cutter instead of the side of the link you can see that there is no black finish on the ends of the links where the connection links attach, while the fake has black ends.
I will probably end up deconstructing these both eventually and comparing each link with each other one, but for now trust me when I say that the links themselves are almost indistinguishable between the fake and the real Tread.
The text and injector pin marks from the casting process are just as pronounced on one as they are the other. I doubt anyone here could identify the real ones from the fake ones without the other for comparison, and worse, I doubt most of us could sort them out 100% from a pile of real and fakes. In both of the above photos, the real Tread is on top and the face is on the bottom.
Getting to the business end, as noted previously the clasp on the fake features too ball bearing detents to hold it closed while the real Tread only has one. This may be the easiest way to identify the fake from the real Tread, as it should be easy enough to pick out from photos, and is certainly easier than pulling screws out to see if they are the same color all the way through. You'll also notice that the real Tread seems to be just as scratched and scuffed as the fake, again despite the fake having been worn for months and the real one being factory fresh. Not a good sign for the Tread.

You will also notice something else- what I'd originally thought was a glob of black paint on the fake is actually a bottle opener icon, which is more defined on the real one than the glob-ish look on the fake.

Getting back to the ball detent, I have to wonder why Leatherman went with only one detent, while the fake one has two. Is Leatherman's ball detent that good that they only need one or did the cheapo decide it was just easier to use two? This is one of those things that needs time and testing to decide on, but I will say that the fake has never inadvertently come loose on my wrist, even when bumping into things, which is something I do often.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



