Jackpot - Found 2.2mm brass rod source
-
Yeah we know about Jeremy. /topic/67551
-
I think it's threaded ones we long the most for, would be nice to not have to peen. But nice find, 2.2mm id's annoying to make for me out of 2.5
Sent from my Whittling Cadet using Tapatalk
-
Conrad sells this too. Any member from Europe is able to get those and forward them stateside (I did a couple of times).
-
Perfect!
Thanks
-
If there's enough interest I will put together kits of brass rod and sell them through the forum.
I'm thinking three options: 84mm, 91mm and 93mm, each with enough brass rod to build 2 or 3 knives. I'll have to confirm prices, but for a 91mm set (2x 2.2mmm x 100mm and 2 x2.5mm x 100mm) it'll be about £3 in the UK, £4 shipped to Europe or £6 to the rest of the world.
-
Sounds like a neat kit...
-
I’d buy some.

-
So after I smurfed up and ordered 2mm rod, received it, realised my mistake and finally ordered the 3/32 inch one you tell me there is actually a source of 2.2mm? :ahhh
-
It's not our fault if you don't read the posts in your own thread properly:
Don't rush it mate. Just don't forget about it either. We are keen for you to succeed

brass rod for 84mm : https://www.conrad.de/de/messing-rund-profil-o-x-l-22-mm-x-500-mm-236163.html
I ended up ordering a cheap, small, modelling hobby ball/pein hammer over ebay.-Tom
Do you have any idea what is the weight of your hammer?

::)

-
:D
-
@stoneshank said:
I think it's threaded ones we long the most for, would be nice to not have to peen. But nice find, 2.2mm id's annoying to make for me out of 2.5Sent from my Whittling Cadet using Tapatalk
Using a 2.2mm metric fine thread die would be easy enough, so I assume you want internal threads? It would have to be a quite tiny screw to leave some material left of the side to still keep it together.
Anyway a perfect little center hole would help guide and drill whatever size you need. So for rods with truly tiny center holes, and diameters available in tiny metric steps (1.5, 1.6, 2.0, 2.2, 2.25, 2.3, 2.5, 3.0 etc) in brass, copper, tungsten or tungsten copper, try searching for terms like "single hole EDM drill electrode". Usually sold as packages with a few meters, but not too crazy priced if you plan a few mods.
(Make sure you don't order multi-hole electrodes - and come to think of it I wouldn't try threading the tungsten ones).
-
I've ordered a bunch of brass rod - it's for sale over here: /topic/76264

-
@hiraethus said:
If there's enough interest I will put together kits of brass rod and sell them through the forum.I'm thinking three options: 84mm, 91mm and 93mm, each with enough brass rod to build 2 or 3 knives. I'll have to confirm prices, but for a 91mm set (2x 2.2mmm x 100mm and 2 x2.5mm x 100mm) it'll be about £3 in the UK, £4 shipped to Europe or £6 to the rest of the world.
sign me up for some :D -
I can vouch for Jeremy. Ordered some 2.2mm rods from him for a project. Very reasonable price, and fast shipping from the UK.
-
-
Greetings all, apologies for resurrecting an old thread.
Is hiraethus still offering these? I found another thread on here that appeared to be the place to pick up hiraethus' kits, but the thread closed ages ago. ???
Noobie here, but it already seems like 2.2mm/2.25mm brass rods are as easy to find as unicorn eggs! :-\
-
Where in nz are you?
-
Tauranga, BoP

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login