Been doing some work in the Wiki
-
@El Corkscrew said:
Why ya gotta poke Eeyore, J-Man?
I'd discovered the layer thing... The more I think about the wiki the more I realize how much work it is and awlso that it kinda depends on point of view as far as including information and saying what other knives are "related" to others...I do usually eventually find the answer I'm looking for on there, just might not be the first place I look.... and that's OK. :D

:lol:
Sent from my iPhone using Tapatalk
-
@jaya_man said:
In the description box at the top, the trecker is referred as the civilian version of the original OH GAK...
Under variations no.2, OH GAK is described as the civilian version of the original OH GAK... maybe contradictory is not the right word, but rather confusing... any physical differences between OH GAK and OH GAK?On the layers page, i didn’t notice it was there... thanks for pointing...
Hmmm, the Original Vagabond is 4 layers, where as the SwissBianco Vagabond would be 3 layers... right?Re: **Trekker **- Got it !! .... Better ??
Re: Vagabond - Just read the page - Yep it seems so - And the text mentions the different tool layout!!
..... Which, according to the Wiki layer definitions, suddenly makes it a three, not a four layer knife -
... Confusing !It would be more consistent if we counted springs !!
But then you might get people asking, 'How come the Rambler has three layers? - I can only see two' ???As El CS says it's often down to interpretation / opinion !!
What do people think ??? Layers or springs ??? Or don't mind/care/think it is important.
It's only enthusiasts like us who think about this ! -
I go with the majority... am just accustomed to how we count layers for the other vic sizes...
Sent from my iPhone using Tapatalk
-
Hmmmm OK
And how would that apply to the 58s - with their two - full, front and back layers of tools ???
... And tools that have either one or two springs ???
Just about all the others have a 1:1 relationship from spring to tool to layer
Re ** Trekker **- Is it .... **better? **now
-
@ThePeacent said:
such a good, long and time consuming work that you've done for us, and the world
I thank you for that!
This!
Also, if you're taking the time to fix everything and come up with a better layout, I'd say whatever you do is fine.

Don't take suggestions from who knows more, just from who has done better.
-
As part of a larger maintenance scope, I'll likely be upgrading the wikis soon to the new LTS release.
-
and it's done... let the complaints roll in...

-
And how would that apply to the 58s - with their two - full, front and back layers of tools ???
... And tools that have either one or two springs ???
Just about all the others have a 1:1 relationship from spring to tool to layer
Re ** Trekker **- Is it .... **better? **now
Forgot to mention... been really busy yesterday... Yes, its better now... Thanks...
Sent from my iPhone using Tapatalk
-
@ Whoey - Thanks - It all seems to be OK - At least so far

I think the page hit counter is still not working though !! Or is that a major version change / upgrade - Or maybe just no-one is visiting the Delémont pages :( !!
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
@ EveryoneI named the Delemont pages eg ***"Delémont Evolution 17" ***- Or such like - ie: ***"Delémont xxx nnn" ***
I just noticed that, in a Google search, the Wiki pages do not come up near the top of the list if you search for eg ***"Victorinox Evolution 17" ***
They do if you search for ***"Delémont Evolution 17" ***Do you think we need to rename all the pages to ***"Victorinox Delémont xxx nnn" *** - So that they come up in searches !! ???
-
Hi there!
Could someone please implement on the wiki, under the Wenger "series" page, what I wrote years ago about the Patagonian Expedtion Race series?
</topic/57194
I came across that old topic recently, and I think it would be bad to have all that information lost, since I spent quite some time researching.
I would had done myself, but I stopped editing the wiki years ago, and I don't remember anything about it -
Looking at the wiki, there's a number of modules that may have changed and need to be looked at. I'm not overly sure how the wiki is setup, I've only been upgrading the core software, not actually using it (I have plenty of other tasks to chase up). Also we've upgraded the software through many versions which might explain some of the breakage. As usual searching for help on Tikiwiki's site is increasing frustration over the confusion of using tikiwiki itself.
Any ways, the bottom line here is, I don't know enough about tikiwiki itself to actually help out with any encountered problems. I've got a full plate of other fish to fry at the moment, but obviously if there is something I can do that will fix it, I'm more than happy to do it.
-
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
@ EveryoneI named the Delemont pages eg ***"Delémont Evolution 17" ***- Or such like - ie: ***"Delémont xxx nnn" ***
I just noticed that, in a Google search, the Wiki pages do not come up near the top of the list if you search for eg ***"Victorinox Evolution 17" ***
They do if you search for ***"Delémont Evolution 17" ***Do you think we need to rename all the pages to ***"Victorinox Delémont xxx nnn" *** - So that they come up in searches !! ???
I think the ***"Victorinox Delémont xxx nnn" *** is a good idea. It reflects the fact that those knives, although not originally from Victorinox, are now being made by them. I've seen some sites and they separate both collections, too.
-
I should try a simple edit to get my feet wet...
-
DO IT ! ! !
Yes I saw you were an editor :) :o
Why don't you finish off the 85mm Delemonts - There's about 5 or 6 still to do - And a reasonably straightforward job - But significant
Copy one of the other 85mm pages and edit away. The main 85mm series page is all there - Ready and waitingI just took the pics from the Vic website - You need to upload them first
-
We had some very detailed discussion about what to do about the switch to 100% liner locking models for the 111mm range at the top of the previous page.
Well I had a go at updating the Forester and Rucksack models with those changes, - along the lines of my suggestions, of course: :o ;)
http://www.sakwiki.com/tiki-index.php?page=Forester+VictorinoxAny comments? Does this work for you? Alles clar?
LeaFy - I know you put a lot of thought into this !Hey -That excel that you shared is great BTW

-
@Huntsman said:
Any comments? Does this work for you? Alles clar?
LeaFy - I know you put a lot of thought into this !
Hey -That excel that you shared is great BTW
Hi! Looks great. I will check more detaily later and (hopefully) will return with some comments. :)
By the way, I did some minor updates here:
http://www.sakwiki.com/tiki-index.php?page=VSAKCS+-+Anniversary+Knife+SeriesPlease check if everything is ok (we still don't have picture for VSAKCS 2001 model :ahhh )
-
@Huntsman said:
We had some very detailed discussion about what to do about the switch to 100% liner locking models for the 111mm range at the top of the previous page.Well I had a go at updating the Forester and Rucksack models with those changes, - along the lines of my suggestions, of course: :o ;)
http://www.sakwiki.com/tiki-index.php?page=Forester+VictorinoxAny comments? Does this work for you? Alles clar?
LeaFy - I know you put a lot of thought into this !Hey -That excel that you shared is great BTW

Ja wohl, Alles klar! :D

-
@LeaF said:
By the way, I did some minor updates here:
http://www.sakwiki.com/tiki-index.php?page=VSAKCS+-+Anniversary+Knife+Series
Please check if everything is ok (we still don't have picture for VSAKCS 2001 model :ahhh )Thanks - Good stuff - I reorganised the list/page a little - I think it looks better now - Is it OK?
-
The page looks neater now Hunstman... I like it... Now if only we have a good pic for the 2001 edition... We’ve seen some on the web... Guess its unethical to borrow someone’s pic without permission...
-
Thanks JM - Appreciate the feedback

Re 2001 Image - Yes I think that is what LeaFy thought when he did the updates- The SAAMS site we link to in the page has an image - But does not say who owns it - Although I almost consider SAAMS site to be part of us !
@El Corkscrew said:
Ja wohl, Alles <u>k</u>lar! :D
Entschuldigung, und vielen dank, mein Freund :D

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login