SAK: 2 layer with mag
-
Wenger Universal wrench!!!
-
@Toppskarven . said:
Wenger Universal wrench!!!
Does it actually fit? That would be cool. -
Many thanks, that's certainly one to consider and i would probably use that a hell of a lot more than a Phillips

-
Well, you can have both openers facing the inline phillips. Maybe they can be facing the mag glass?...

-
@pfrsantos said:
Well, you can have both openers facing the inline phillips. Maybe they can be facing the mag glass?...

True. Seen that as well.
I don't know if the backspring needs to be rebend though... -
@pfrsantos said:
Well, you can have both openers facing the inline phillips. Maybe they can be facing the mag glass?...

Short answer, I don’t think that you can do that.
:-
Second, tell me if I’m missing something, like this mod being done before?Long answer:
First, only the new shorter Philips can fit opposite the openers, and that’s on a 93mm SAK. So that rules out the new magnifier thanks to arithmetic, though at this point the old one might physically fit, on a 91mm SAK.Second, and most importantly, you need to use two springs.
On a 93mm SAK, I believe that it is two blade springs, one of them flipped around.
Since you can’t flip the springs around on 91mm SAKs, the outcome for this suggestion is not looking good. :-[ -
@Pablo O'Brien said:
Well, you can have both openers facing the inline phillips. Maybe they can be facing the mag glass?...

Short answer, I don’t think that you can do that.
:-
Second, tell me if I’m missing something, like this mod being done before?Long answer:
First, only the new shorter Philips can fit opposite the openers, and that’s on a 93mm SAK. So that rules out the new magnifier thanks to arithmetic, though at this point the old one might physically fit, on a 91mm SAK.Second, and most importantly, you need to use two springs.
On a 93mm SAK, I believe that it is two blade springs, one of them flipped around.
Since you can’t flip the springs around on 91mm SAKs, the outcome for this suggestion is not looking good. :-[Arithmetic... never liked her!
:( >:(
-
The two openers would have been great but thank you pabs for explaining why it would be difficult, i don't mind making liners or adapting springs but making springs is a different kettle of fish, i will think on it but atm the easiest thing i can do is modify the Phillips into something else, thanks guys, i will think of something

-
It might be possible in theory, there could be the right springs, but Victorinox’s habit of having different speSmurfpillsed tangs makes it tricky.
You would need to get two springs. On one end, both of them are the same or similar enough to match. That’s where the mag glass would go, if there is enough space in a 91mm SAK to begin with if the openers are going opposite it.
If the 4th rivet is in the way, the mag glass would probably have to go on the keychain side of the SAK, the same side that it is currently located, on stock SAKs.
Back to the springs. On the opposite end of the springs, one of them has to mate with the bottle opener, the other with the can opener.
In any case, I’m interested to see what you do with the Philips.

-
Thanks Pabs, i'm not really interested in smurfing around with springs for now, will try to keep this as easy as possible, i have an idea so will gather some tools needed for the job, will post when done

-
x 10. :ahhh 
-
At this point i should mention that i am very slow at doing things... it will happen though

-
:D If im tasked with putting up shelves in the kitchen i'm too slow, some other things i'm too quick..just cant win ::)
-
Ok so i decided to give this a try as i was undecided

I think you know where this is going..

And the result..


Tested on wood and plastic with mole grips, works fine, no bends or breaks, i'm not going to reharden it (if it even needs it) as i think it will be fine for what i want it for, also i probably cant ..oh well, easier to sharpen if nothing else

Fits snuggly with mag and nail nick in perfect position, all good..hopefully it will last but if it doesn't then lesson learnt.. now to clean it up a bit
-
Wow!

Unexpected! -
Excellent.

-
OK.
A radical solution.
Way outside of the box.
Way, way, way outside of the box.
Let us know how it goes? Soft woods I can see being ok, but thick plastic or hard wood, I would worry about how well it held up.
-
Thanks guys

For now i am not 100% confident it will hold for heavy work but i'm pretty sure it will do for me as long as its kept sharp, i'm not planning to test it to destruction but if it breaks i will just remove it and replace it with one from a 93mm, or think of something else, it's a trial so i'm perfectly happy to let you know when/if it snaps off, however to be honest i see no reason why it should, time will tell though
All cleaned up, just waiting on new rods

-
Nice solution Borg -this is a genuinely interesting development!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
