Leatherman Quality Control
-
Aren't LMs made by machines too? I see lately the idea/notion that swisstools are made by machines, so they have better quality, than the "hand madeish " ?? LM ?
I saw this notion in a few posts lately, but as far as i know they are both machine made. The swisstools are better polished but is this a design feature or a product of better machinery? I assumed that it was a design feature and LM can polish anything they like too.Are the machines used in the US lesser or less than the ones in Switzerland?
-
According to "how it's made"s video, even the beveled edge on the pliers heads is ground by a machine.
A robotic arm holds the pliers while they move it across a belt grinder. -
I would assume the machined pieces are machined by a machine. But the assembly, that's most likely by a person...
-
What really baffles me though is how they can get the plier resistance so different? The pivot should be smashed down by machine, and shouldn't that machine do it with equal force according to the headdesign each and every time?
-
Because the contact surfaces aren't machined correctly, or the rivet is the wrong length (or diameter), or the jig is wonky, or the press is faulty, or the operators aren't placing the parts correctly, or there's corrosion on the pliers head, or they're not being cleaned properly, or ...
These are reasonably complicated assemblies, with lots of steps and operations that go into making them - and there's plenty of places where it can go wrong. We know the design is good, because they can be made well - but not every time, and some of the ones that aren't good slip through QC. Placing the blame on the 'quality control' isn't entirely fair though - the whole process from design through manufacture to assembly to quality needs to be done properly.
-
@hiraethus said:
Because the contact surfaces aren't machined correctly, or the rivet is the wrong length (or diameter), or the jig is wonky, or the press is faulty, or the operators aren't placing the parts correctly, or there's corrosion on the pliers head, or they're not being cleaned properly, or ...These are reasonably complicated assemblies, with lots of steps and operations that go into making them - and there's plenty of places where it can go wrong. We know the design is good, because they can be made well - but not every time, and some of the ones that aren't good slip through QC. Placing the blame on the 'quality control' isn't entirely fair though - the whole process from design through manufacture to assembly to quality needs to be done properly.
Maybe it's just me, but if I made things I would be sleepless and crazy OCD about the lowest grade things leaving the factory being about the best quality that is going out now. But hey, maybe that's just me.
-
But if your team leader doesn't care, or you've got an interim line manager who's busy doing something else, or only get paid $7.25/hour why should you bust a gut?
-
@hiraethus said:
But if your team leader doesn't care, or you've got an interim line manager who's busy doing something else, or only get paid $7.25/hour why should you bust a gut?Well, because I wouldn't want to stand behind a product that isn't as close to perfect as I can make it. But I understand what you are saying. But that is ofcourse only my opinion.
-
at $7.25 an hour the product should be pretty good
-
that comes down to about $1400 -1500 a month - not a low wage in most countries, for what is basically a non demanding job with little qualifications needed
-
@dks said:
that comes down to about $1400 -1500 a month - not a low wage in most countries, for what is basically a non demanding job with little qualifications neededBut it will put you well below the poverty line here unfortunately :-[ That is why many who make that have a spouse with a job and perhaps another job themself
Surely they make more than that per hour though :-\Not saying that should have anything to do with QC but I am sure quota has a great deal to do with that

-
I think your math is a bit off dks
7.25 x 40 hour workweek is less than $1,200 a month
-
It depends on how many days you work. I did say approximate.
So, if they make $7.50 it will be fine?
I always wonder with everything being cheap in the US (food, cars, petrol, multitools, electronics, land, houses), apart form health insurance apparently, why would people feel poor making $1500 per month. (Assuming that they do not live in e.g. NY)
The costs in many countries are more, than in the US (e.g. Europe, especially eastern Europe) and people manage to live decently with wages around half that.
-
I have no idea how much Leatherman actually pays their workers. $7.25 is the US minimum wage. To some it might look like that's a good wage, but I imagine that it doesn't go far in the US.
What I'm trying to get at is that it's not just 'quality control' that's the likely cause of the poor(er) quality product that seems to be coming out of Leatherman.
-
They need QA, not QC
-
dks,
It isn't about numbers. It is income to expense issue. Lets say I make $1500/month. Uncle Sam and SS gets $200-$300 of that. My rent/house payment is $600 in a crumby neighborhood. My car payment for a old beat up car is $150/month. My gas to work and back ends up being $75/month. My car insurance is $75/month. My health insurance is $100/month. I eat crappy food for $100/month.
That leaves $100-$200 AT BEST left over each month.
Oh. My apologies. That went to the internet company $50/month, electric bill ($100/month), gas bill ($50/month), and water bill ($50/month).
Oops. I'm drowning in debt.
That doesn't even include having any family, unexpected medical co-pays (yes. We pay for med visits and insurance), sick days, etc, etc.
My numbers here were basically the least possible you can spend here to live on your own. Tha $1500/month is no good.
And did I mention, at least in my state, I pay sales tax on everything (including food).
$2000/month is pretty low income in 'non-expensive' areas in the US. -
Will do
.@ElSteverino said:
...And also, all the happy owners don't complaint or tend to make their voice heard, they just enjoy and use their tool/tools. So just because a few people complaint on a forum doesn't mean that they have QC problems
Totally agree - would be great to hear from any forum members with a LM 'plus' who don't have these QC issues
...cough

@Top-Gear-24 said:
I must say that his one looks like a Leatherman from 15 years ago. Not one thing wrong with it (okay, there was one thing, one of the screws from the replaceable wire cutters wasn't screwed in deep enough, and it touched the handles when closing the tool, but this was fixed in two seconds and with two twists of the wrist ;)).But the rest of the tool feels just perfect, nothing rubbing, nothing too loose or too tight, handles perfectly aligned (the tool lies perfectly flat on the table, not like most Spirits
). And every part of the tool, inside and outside feels just perfect. This Wave + is possibly the Leatherman with the best fit and finish since, dare I say ... My original Supertool :D.Okay, my Charges (date codes 0808), my previous Wave (date code 0111) and the two 25th Anniversary Waves (date codes 0408) I recently bought also had great fit and finish, maybe the Wave/Charge platform is just Leatherman's A-game. I must say, all of my previous Wave/Charge tools had the pliers rubbing against the handles while closing the tool, scratching up the plier head along the way, the new Wave + (at least the one I own :P) does not seem to have this "problem". This is not a big thing, since it's a tool and pliers are bound to get scratched up during use, but still, I hope this means that Leatherman have stepped up their game, and that their QC issues have been dealt with ... If not, I guess I should just be happy that I was one of the lucky ones this time ... ;)
To read the complete topic, click here.
-
$1,500 a month is nothing around here. I moved out of a higher cost of living neighborhood to a lower cost of living area. Still can’t make it on $1,500 a month. Even in my current location rent for a 1 bedroom apartment is $1,000 a month or higher. This is in a less than desireable part of town. Unless you have a spouse that also works and do not have any kids you may just barely get by. Now if you have kids or do not have a partner pulling in a second income your royaly smurfed. It is very common around here for people to have a spouse that also works as well as one, if not both of them having a second, part time job just to survive and feed themselves and their children.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

