Leatherman Quality Control
-
I think your math is a bit off dks
7.25 x 40 hour workweek is less than $1,200 a month
-
It depends on how many days you work. I did say approximate.
So, if they make $7.50 it will be fine?
I always wonder with everything being cheap in the US (food, cars, petrol, multitools, electronics, land, houses), apart form health insurance apparently, why would people feel poor making $1500 per month. (Assuming that they do not live in e.g. NY)
The costs in many countries are more, than in the US (e.g. Europe, especially eastern Europe) and people manage to live decently with wages around half that.
-
I have no idea how much Leatherman actually pays their workers. $7.25 is the US minimum wage. To some it might look like that's a good wage, but I imagine that it doesn't go far in the US.
What I'm trying to get at is that it's not just 'quality control' that's the likely cause of the poor(er) quality product that seems to be coming out of Leatherman.
-
They need QA, not QC
-
dks,
It isn't about numbers. It is income to expense issue. Lets say I make $1500/month. Uncle Sam and SS gets $200-$300 of that. My rent/house payment is $600 in a crumby neighborhood. My car payment for a old beat up car is $150/month. My gas to work and back ends up being $75/month. My car insurance is $75/month. My health insurance is $100/month. I eat crappy food for $100/month.
That leaves $100-$200 AT BEST left over each month.
Oh. My apologies. That went to the internet company $50/month, electric bill ($100/month), gas bill ($50/month), and water bill ($50/month).
Oops. I'm drowning in debt.
That doesn't even include having any family, unexpected medical co-pays (yes. We pay for med visits and insurance), sick days, etc, etc.
My numbers here were basically the least possible you can spend here to live on your own. Tha $1500/month is no good.
And did I mention, at least in my state, I pay sales tax on everything (including food).
$2000/month is pretty low income in 'non-expensive' areas in the US. -
Will do
.@ElSteverino said:
...And also, all the happy owners don't complaint or tend to make their voice heard, they just enjoy and use their tool/tools. So just because a few people complaint on a forum doesn't mean that they have QC problems
Totally agree - would be great to hear from any forum members with a LM 'plus' who don't have these QC issues
...cough

@Top-Gear-24 said:
I must say that his one looks like a Leatherman from 15 years ago. Not one thing wrong with it (okay, there was one thing, one of the screws from the replaceable wire cutters wasn't screwed in deep enough, and it touched the handles when closing the tool, but this was fixed in two seconds and with two twists of the wrist ;)).But the rest of the tool feels just perfect, nothing rubbing, nothing too loose or too tight, handles perfectly aligned (the tool lies perfectly flat on the table, not like most Spirits
). And every part of the tool, inside and outside feels just perfect. This Wave + is possibly the Leatherman with the best fit and finish since, dare I say ... My original Supertool :D.Okay, my Charges (date codes 0808), my previous Wave (date code 0111) and the two 25th Anniversary Waves (date codes 0408) I recently bought also had great fit and finish, maybe the Wave/Charge platform is just Leatherman's A-game. I must say, all of my previous Wave/Charge tools had the pliers rubbing against the handles while closing the tool, scratching up the plier head along the way, the new Wave + (at least the one I own :P) does not seem to have this "problem". This is not a big thing, since it's a tool and pliers are bound to get scratched up during use, but still, I hope this means that Leatherman have stepped up their game, and that their QC issues have been dealt with ... If not, I guess I should just be happy that I was one of the lucky ones this time ... ;)
To read the complete topic, click here.
-
$1,500 a month is nothing around here. I moved out of a higher cost of living neighborhood to a lower cost of living area. Still can’t make it on $1,500 a month. Even in my current location rent for a 1 bedroom apartment is $1,000 a month or higher. This is in a less than desireable part of town. Unless you have a spouse that also works and do not have any kids you may just barely get by. Now if you have kids or do not have a partner pulling in a second income your royaly smurfed. It is very common around here for people to have a spouse that also works as well as one, if not both of them having a second, part time job just to survive and feed themselves and their children.
-
@gerleatherberman said:
dks,
It isn't about numbers. It is income to expense issue. Lets say I make $1500/month. Uncle Sam and SS gets $200-$300 of that. My rent/house payment is $600 in a crumby neighborhood. My car payment for a old beat up car is $150/month. My gas to work and back ends up being $75/month. My car insurance is $75/month. My health insurance is $100/month. I eat crappy food for $100/month.
That leaves $100-$200 AT BEST left over each month.
Oh. My apologies. That went to the internet company $50/month, electric bill ($100/month), gas bill ($50/month), and water bill ($50/month).
Oops. I'm drowning in debt.
That doesn't even include having any family, unexpected medical co-pays (yes. We pay for med visits and insurance), sick days, etc, etc.
My numbers here were basically the least possible you can spend here to live on your own. Tha $1500/month is no good.
And did I mention, at least in my state, I pay sales tax on everything (including food).
$2000/month is pretty low income in 'non-expensive' areas in the US.@captain spaulding said:
$1,500 a month is nothing around here. I moved out of a higher cost of living neighborhood to a lower cost of living area. Still can’t make it on $1,500 a month. Even in my current location rent for a 1 bedroom apartment is $1,000 a month or higher. This is in a less than desireable part of town. Unless you have a spouse that also works and do not have any kids you may just barely get by. Now if you have kids or do not have a partner pulling in a second income your royaly smurfed. It is very common around here for people to have a spouse that also works as well as one, if not both of them having a second, part time job just to survive and feed themselves and their children.At least the food is cheap... :D
-
Agreed. Relying on having someone to intercept problems before they leave the door is not enough. There should be procedures for ensuring the best possible standard throughout the processes, along with in-stage inspections so that any non-conformances are identified and corrected before they reach final inspection.
Rates of pay are somewhat of an irrelevant/separate issue to quality management.
While I've had my gripes about many of LM's design attributes, they do tend to have fairly sound mechanical knowledge, and often tend to have a stronger product design than for example many Gerber offerings. When Gerber do a bad tool, it's generally due to poor design, rather than failings in realising that design through the production stages. They make good tools well, and bad tools well too. For example, the weak backstop on the Octane blade, or the hit-and-miss lock up on the Flik's ratchet mechanism, were both design failings, not manufacturing ones. On the whole, I've found less production defects on Gerbers than LMs, and more design failings on Gerbers.
In my experience, the only company that produces more quality issues, purely in terms of production standards, is SOG. One manufactures "at home", and the other contacts everything out. This reinforces the stance that it does not matter where a product is made, the management either has control of it's design and manufacturing standards, or sloppily made products get out in the marketplace, and your reputation is at risk.
-
I have to agree with Al here.
Paygrade has NOTHING to do with quality.
Even IF the employees at LM are payed minimum wage, you can't go expect to get a better pay before you start doing your job properly.
That's a downward spiral."- I don't get payed enough so I'm not doing my job properly. I want a raise before I'll give it 100%...."
Wtf?My gf works at a retirement home.
She takes care of people with dementia.
She get's €1300 a month while working evenings, weekends and hollidays.So what I'm reading here sugests that she should stop washing and feeding those people?
She'll need a raise before she will take care of them?She does it because of her love for other people, love for her job.
There is NO excuse in slacking because you think you're underpayed.
You signed your contract before you began.
NO excuse! -
@Mechanickal said:
I have to agree with Al here.Paygrade has NOTHING to do with quality.
Even IF the employees at LM are payed minimum wage, you can't go expect to get a better pay before you start doing your job properly.
That's a downward spiral."- I don't get payed enough so I'm not doing my job properly. I want a raise before I'll give it 100%...."
Wtf?My gf works at a retirement home.
She takes care of people with dementia.
She get's €1300 a month while working evenings, weekends and hollidays.So what I'm reading here sugests that she should stop washing and feeding those people?
She'll need a raise before she will take care of them?She does it because of her love for other people, love for her job.
There is NO excuse in slacking because you think you're underpayed.
You signed your contract before you began.
NO excuse!Nobody's saying that Nick, she should still keep washing and feeding them, but doing it really half assed ...
P.S.: My wife also works in a retirement home that speSmurfpillses in people with dementia (and me, I work logistics in a hospital), so I truly get what you're saying about the pay vs work/shifts/weekends/holidays ... ::)
-
Hey now. I run a retirement home for multitools. I get paid nothing to lube and polish them daily. I do the best job possible. :D
I accept all brands and styles of multitools as well. :) -
@gerleatherberman said:
Hey now. I run a retirement home for multitools. I get paid nothing to lube and polish them daily. I do the best job possible. :D
I accept all brands and styles of multitools as well. :)Would you mind me borrowing your business idea?

-
@MTMatt said:
Hey now. I run a retirement home for multitools. I get paid nothing to lube and polish them daily. I do the best job possible. :D
I accept all brands and styles of multitools as well. :)Would you mind me borrowing your business idea?

If you don't mind being broke constantly, go for it.

-
@MTMatt said:
Hey now. I run a retirement home for multitools. I get paid nothing to lube and polish them daily. I do the best job possible. :D
I accept all brands and styles of multitools as well. :)Would you mind me borrowing your business idea?

If you don't mind being broke constantly, go for it.

Yeah... no replies yet :D
-
IF employee pay is the reason why QC is spotty then what about the higher ups? They have to see a spike in returns and warranty claims? Surely someone higher who gets paid a bit more would care more? What about even higher up? At some point the QC element would need to be addressed.
As to wages, while I can sympathize IF the employees at LM are being paid low I cannot begin to except that as an excuse. Doesn't pride or work ethic or the notion that letting product go out the doors in less that perfect order can result in job loss factor in?
Lastly, while 1200 per month may be living well in other parts of the world I can assure you here in California it is not.
-
I still maintain that one of the biggest reasons LM lets duds out is that none of their assemblers are MT.o members. :D
-
Last month the scissors sping of my LM Style PS broke, without using it!
In my pocket, in my keychain!!!Crap!
-
@alexTOOL said:
Last month the scissors sping of my LM Style PS broke, without using it!
In my pocket, in my keychain!!!Crap!
Part of the reason I've started getting into the P4, E4 (EL), and S4 models, they don't have that problem. I'd like to see just what the issue is with the high rate of scissor spring failures (especially with lightly used, or mostly unused tools) on these and why it is going ignored. The scissor spring broke on my PS4 after I opened them up after the tool being stashed in one of my storage boxes for about 2 months, and I'd maybe carried and used it lightly half a dozen times before stashing it.
I'm thinking about turning it in with that new return voucher program and getting a Leap or something from the Juice family. Or just a Micra, preferably a colored one.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
