Power Access owners' club
-
PowerAccess, Style ES, Grappler

-
@the_dude said:
after a few more weeks of edc'ing the power access, and using it on a daily basis, i have less mixed feelings and more negative feelings.everything i mentioned about it negatively in my previous post is still true, but amplified over time and extended use.
the latest strike against it came tonight. using the larger flathead driver to remove three screws from an appliance that i was repairing. applying any amount of pressure or torque at all, made the tool flex and feel like it was going to get damaged. the screws didn't budge, but i did manage to experience the unfortunate driver unlock during use. closed right on my fingers.
this tool is a novelty, a well thought-out toy. not made for real world use. the frame flexes too much, which cause the locked drivers to become unlocked. not confidence inspiring to say the least.
on a side note, i pulled out my leatherman sidekick to do the job. screws popped loose easily. the tool didn't flex a bit.
oh well. maybe SOG will read this and take the critiques seriously. i really, really, really wanted to like this MT.
My first Charge ALX broke in two when I used the flathead on a rusty screw. I used the tool like a T-handle. SOG wont let you do that because of the compound leverage, but this is a test that not many MTs can handle.
Sad to hear that you are not enjoying PowerAccess. Are you thinking some other tool or contacting SOG warranty?
-
@the_dude said:
after a few more weeks of edc'ing the power access, and using it on a daily basis, i have less mixed feelings and more negative feelings.everything i mentioned about it negatively in my previous post is still true, but amplified over time and extended use.
the latest strike against it came tonight. using the larger flathead driver to remove three screws from an appliance that i was repairing. applying any amount of pressure or torque at all, made the tool flex and feel like it was going to get damaged. the screws didn't budge, but i did manage to experience the unfortunate driver unlock during use. closed right on my fingers.
this tool is a novelty, a well thought-out toy. not made for real world use. the frame flexes too much, which cause the locked drivers to become unlocked. not confidence inspiring to say the least.
on a side note, i pulled out my leatherman sidekick to do the job. screws popped loose easily. the tool didn't flex a bit.
oh well. maybe SOG will read this and take the critiques seriously. i really, really, really wanted to like this MT.
While I don't like the Sidekick, it's for ergonomic reasons, and my belief that screwdrivers need to lock and blades don't (not the other way round), not because of any specific failure to function. Here we have a tool which LM specifically designed to be sold at minimal cost, which still functions as advertised, having to be used when a SOG tool intended to be sold at a higher cost simply doesn't do the job. Aside from the locking defects, the SOG flexes more than LM's lowest priced (at time of commercial release) offerings, and fails to do a simple screwdriving task that a bargain basement model can do. This speaks volumes against the SOG brand, and is yet another page in a catalogue of failures.
I said a while ago that I no longer have any faith in the brand, and more and more people are starting to make similar mutterings (despite wanting to like the tools). SOG need to realise that customers won't keep trying them if they keep churning out crap like this. Some customers have forgiven them for the PowerDuo or whatever it was called, but they haven't released a product since (to my knowledge) which has had overwhelmingly good reviews. That's simply not sustainable, and it makes me wonder if SOG have given up on their own brand too. Maybe they think there's more money to be made in novelty tool shaped "dad gifts" than in proper functional tools. This seems to be the new norm from them, so it doesn't seem like we'll be seeing any "proper" tools from them anytime soon.
I know SOG read this forum, so if they would care to comment on this, I would be very interested to hear what they have to say for themselves.

-
I have a SOG PPP that I basically like and often will throw into a laptop or photo equipment bag or a jacket pocket when I don't expect to really need to have a tool. When the Poweraccess was announced I was sure I was going to get one as it solves or almost solves two of the biggest problems for me with the PPP, uncomfortable under tight grip handles and non-locking drivers. But I have to say after reading some of the feedback here my enthusiasm has greatly diminished

-
At work today

-
I didn't think this required a new thread, so I came where the experts are

I haven't seen anyone swap out tools on the poweraccess, can this be done? For instance replacing the file with the v-cutter?
Also, are the PA tools an upgrade from the Powerlock inner tools? One of the reasons I let go of my PL is because the inner tools outside of the blade and v cutter where unreliable and didn't really lock. Just a little pressure and the tools would fold. Or they would bend because of weak metal. Has SOG fixed this with their newer tools?
It does feel good to be able to check in with you all again

-
@Demel said:
I didn't think this required a new thread, so I came where the experts are

I haven't seen anyone swap out tools on the poweraccess, can this be done? For instance replacing the file with the v-cutter?
Also, are the PA tools an upgrade from the Powerlock inner tools? One of the reasons I let go of my PL is because the inner tools outside of the blade and v cutter where unreliable and didn't really lock. Just a little pressure and the tools would fold. Or they would bend because of weak metal. Has SOG fixed this with their newer tools?
It does feel good to be able to check in with you all again

The access frame is completely different than the other SOG MTs. So, as of now, the tools are not cross-compatible.
I would send that Powerlock back to SOG. I have six PowerLocks and all of them stay locked up during use.
My PowerAccess is the only one that has inner tools that collapse. I will send it back to SOG one day though.
Glad you checked back in, Demel!I have a PowerAccess Deluxe on pre-order here and hope it has addressed the Access issues. :)
-
I didn't think this required a new thread, so I came where the experts are

I haven't seen anyone swap out tools on the poweraccess, can this be done? For instance replacing the file with the v-cutter?
Also, are the PA tools an upgrade from the Powerlock inner tools? One of the reasons I let go of my PL is because the inner tools outside of the blade and v cutter where unreliable and didn't really lock. Just a little pressure and the tools would fold. Or they would bend because of weak metal. Has SOG fixed this with their newer tools?
It does feel good to be able to check in with you all again

The access frame is completely different than the other SOG MTs. So, as of now, the tools are not cross-compatible.
I would send that Powerlock back to SOG. I have six PowerLocks and all of them stay locked up during use.
My PowerAccess is the only one that has inner tools that collapse. I will send it back to SOG one day though.
Glad you checked back in, Demel!I have a PowerAccess Deluxe on pre-order here and hope it has addressed the Access issues. :)
Thanks that helps a lot. The interchangeable tools were one of the biggest pulls for SOG tools. I do hope they reintroduce them at some point.
I let the Powerlock go awhile back. I was downsizing my collection quite a bit, and I no longer needed that large of a tool. I've thought about buying a different one but after awhile just lost interest in it.
-
FWIW, my PL had those tool unlocking issues. :P Once deployed fully, the tools would unlock and fold on you with minimal pressure. Not happening with my Blacktip(s)...

-
@ThePeacent said:
FWIW, my PL had those tool unlocking issues. [emoji14] Once deployed fully, the tools would unlock and fold on you with minimal pressure. Not happening with my Blacktip(s)...
And with the name POWERLOCK....It was frustrating to say the least. I didn't feel I could rely on it after a while.
How's the blacktip compare? Was that one of their US made models?
-
FWIW, my PL had those tool unlocking issues. [emoji14] Once deployed fully, the tools would unlock and fold on you with minimal pressure. Not happening with my Blacktip(s)...

And with the name POWERLOCK....It was frustrating to say the least. I didn't feel I could rely on it after a while.
How's the blacktip compare? Was that one of their US made models?
sorry i just read your response.
Yeah, with the "POWER" on the name one would expect at least some reliable locks for those powerful tools... :ahhh
The Piano locks on my (originally) three Blacktips were much more safe and strong, never failed me in fact. The PL was a USA made for all I know.
-
The PowerLock came out in 1998 if I'm not mistaken. It is still in production. The early ones were USA and weren't very consistent. The PL 2.0 is much better machined and made overseas. There was a short run on PLs that had piano key locks made in the USA and China that are VERY nice, but hard to find. The PowerAssist has the piano locks on one handle(and two outside assisted blades on the other handle) like the BlackTip.

I have four USA PLs and they lock up fine, but have read a lot of people having lockup issues though, particularly the early USA ones having lockup issues.
-
@gerleatherberman said:
The PowerLock came out in 1998 if I'm not mistaken. It is still in production. The early ones were USA and weren't very consistent. The PL 2.0 is much better machined and made overseas. There was a short run on PLs that had piano key locks made in the USA and China that are VERY nice, but hard to find. The PowerAssist has the piano locks on one handle(and two outside assisted blades on the other handle) like the BlackTip.
I have four USA PLs and they lock up fine, but have read a lot of people having lockup issues though, particularly the early USA ones having lockup issues.
cool info!
now that you've proven to be the expert here, maybe you could tell me which generation is my PL, because I really don't knowI'd really appreciate ;)
obviously ignoring the Leatherman implements I put on it, if you are willing I'd send you a PM

-
The PowerLock came out in 1998 if I'm not mistaken. It is still in production. The early ones were USA and weren't very consistent. The PL 2.0 is much better machined and made overseas. There was a short run on PLs that had piano key locks made in the USA and China that are VERY nice, but hard to find. The PowerAssist has the piano locks on one handle(and two outside assisted blades on the other handle) like the BlackTip.

I have four USA PLs and they lock up fine, but have read a lot of people having lockup issues though, particularly the early USA ones having lockup issues.
cool info!
now that you've proven to be the expert here, maybe you could tell me which generation is my PL, because I really don't knowI'd really appreciate ;)
obviously ignoring the Leatherman implements I put on it, if you are willing I'd send you a PM

I have replied to your PM, sir!
SOG PowerLocks are very difficult to ascertain a date on, especially after they went to the super-fine tipped plier heads without the "USA" stamp. :ahhh
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login