Coleman Pro Lock
-
To bad this one didn't take off as the idea behind it is very interesting
Who hasn't had something with your pliers and wishing you also had a screwdriver
I know I have :D Or hold something with the pliers and cut it with the blade that was in the handle just a minute before 

-
The problem is that the tool end of the handles is the expensive part, and the pliers are the cheap part.
That meant that the add on cartridges cost almost as much as just buying another tool. :ahhh
Instead of customizing your load out it became just as easy to have a specific tool in the glove box, in the shop, in the drawer, in the range bag, in the tackle box etc instead of having one tool and a number of optional outfits sold separately.
Def
-
I have one of those still in the clamshell. ;)
-
Might as well, they aren't that useful when you take them out! :P
Def
-
-


Living in small town USA I always see the same old tools and not much variety. Lots of leatherman's and a few Gerbers. Things like this don't usually show up and I'm glad we stopped in this consignment shop today. I about went crazy when I spotted a Coleman Pro-Lock in the display case next to a PST and some other knock off stuff. I had never seen one in the wild and it was cool to see one here. It's slightly neglected with some minor corrosion, sand etc but the blades were factory sharp. Like someone put it in a tackle box and only used the pliers. I've cleaned it up some and it'll be a nice addition to my collection. I was hoping the Leatherman was an early model but it was a '99 in perfect condition but I've got enough of them. I did some digging up of info on the Pro-Lock and it's a pitty it never became more than it was.
Sent from my SM-G935V using Tapatalk
-
That is a great find. They aren't all that common these days.

-
I'm glad someone bumped this thread up. I've never seen this tool before. For those of you that have them, how would you rate the overall quality of the tool, innovation aside?
-
@clown said:
I'm glad someone bumped this thread up. I've never seen this tool before. For those of you that have them, how would you rate the overall quality of the tool, innovation aside?To me; quality is a 5. 10 being victorinox and Leatherman being maybe 7. It's innovative but quality feels like a Chinese copy of a Schrade tool in some ways. Love the idea though, my pliers have play from being used hard I think or had play before and usage made it worse. Still I didn't want to pass up on this piece of history.
Sent from my SM-T377V using Tapatalk
-
I'm glad someone bumped this thread up. I've never seen this tool before. For those of you that have them, how would you rate the overall quality of the tool, innovation aside?
To me; quality is a 5. 10 being victorinox and Leatherman being maybe 7. It's innovative but quality feels like a Chinese copy of a Schrade tool in some ways. Love the idea though, my pliers have play from being used hard I think or had play before and usage made it worse. Still I didn't want to pass up on this piece of history.
Sent from my SM-T377V using Tapatalk
The big question. How much did u pay for it? I saw it once on ebay recently. Got it on my watch list but somehow it still slipped through..

-
There seems to be a couple on eBay now in the $30 range.
-
So I just snagged a brand new one of these on eBay. I really like it!
But you know, I got to thinking. With used models being pretty cheap out there why not snag one or two used Pro locks and then mod some tools to fit the cartridges. I mean the pivots are Allen bolts. That makes this sucker easy to mod!
My brand new one I’m already debating moving some tools around. The can opener should be over with the wood saw IMO. That’s more a camping thing.
It’d be nice to retrofit some kind of bit driver into one spare cartridge, and swap out the camping cartridge for it. Hrm. It’d be fun to fashion a fork too. Maybe from a divot tool or something. The cartridges fit in the hand like small knives, And that would be convenient for camping.
Anyhow, I may snag a used one to play with modding. Got too much on my plate to mess with it now though. Instead I’m just going to enjoy this tool for what it is. A bunch of fun and a damn high quality, well-made tool.
Charles.
-
If and when you do mod it, I would love to see what you have done with it.
-
I've been EDCing my new Pro-Lock for 3 or 4 days now, and my impressions of the tool have only improved. I installed a headboard to a new bedframe with it, and the drivers were great. There was one screw on each side that would have been easy to get to had I put it in before putting the mattress back on,... but I wasn't about to take it back off again. Popping the tool handle out and using it on the screw while I had the pliers on the nut was just genius. I couldn't have easily fit the whole tool back in there to turn the screw, and I'd have needed another tool to hold the nut. So, that was a use case I am surprised to have actually come across.
I do get the "Feels like a Schrade" thing... but I like it more than the Schrade Tough Tool ST5E I had. It's a lot smaller folded up, and it slides into the belt pouch and almost disappears on my hip. I often carry a pouch with something in it -- usually my Victorinox Troubleshooter in a leather sheath. This Coleman sheath may be wider, but it doesn't stick out hardly at all, and I find I don't catch it on things or bump into it with my arm. It's almost like its not there.
The pliers are long needle nose and the handles are beefy. They feel very solid to me, not cheap at all. Because of the shape and the tool cartridges, the blades and drivers are on the short side. The file isn't very good. It will do nails, but it's not aggressive enough for anything other than that. It's a good flat driver though.
I'm finding it really useful, and I enjoy using it more than I thought I would. That said, I do have an affinity for the odd and underdog tools... so keep that in mind :)
Charles.
-
So I'll just leave this little pro-lock mod here... :)
Charles.

-
Skizzers! What a good idea!

-
Nice mod, Charles! The ProLock is on my cheap-radar. Maybe this coming weekend I'll order one. :)
-
You can get them new on eBay for $20 plus shipping. VERY worth it.
Charles.
-
@gerleatherberman said:
Nice mod, Charles! The ProLock is on my cheap-radar. Maybe this coming weekend I'll order one. :)If it's on your cheap radar, you might miss it and never ever see it!! :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
