Handyman Challenge
-
@FolderBeholder said:
I see you're underway with the challenge, best of luck to you, looks great!
Thanks, I'll try my best ☺
Sent fra min FRD-L09 via Tapatalk
-
Day 2
Easter! I like easter. I hardly ever make soft-boiled eggs anymore so today was a treat. I used the large blade to remove the cap of the egg.

Handyman and soft-boiled eggIt's only when I put aside my OH folder that I notice how much cutting I do on a day.
A lot is done in passing by, where my girlfriend grabs a pair of scissors from the kitchen drawer I reach for my right hip.
Oh, that's right. I'm doing a challenge, my Smallbenza isn't there. And I reach for my left pocket, grab the Handyman and deploy the blade.
There are a lot of small tasks like opening packaging, or snipping small rope ties. These things are so casual I don't really think about taking a photo.Day 3
Just another day at work. I as very happy with the file to re-assemble a binder. If you are wondering, why is the tip of his file damaged? There is a perfectly fine explanation. I'm not sure if I ever told this before, but that's a whole other story.

Handyman file and binderKeep your friends close, but your
enemiesSAK closer.
That way, you will always have a tool at hand to remove a stubborn stuck hatch!
Handyman hook and stubborn hatch -
#4 Tried the pliers today to thighten a small screw for a hatch in a bus at work, and they did the job [emoji106] The knife was used for opening som boxes and the file got used to file down a rivet. So far I'm liking the Handyman [emoji16]

Sent fra min FRD-L09 via Tapatalk
-
@RF52 said:
#4 Tried the pliers today to thighten a small screw for a hatch in a bus at work, and they did the job [emoji106] The knife was used for opening som boxes and the file got used to file down a rivet. So far I'm liking the Handyman [emoji16]
Sent fra min FRD-L09 via Tapatalk
those pliers are stronger than we give them credit for...

-
#4 Tried the pliers today to thighten a small screw for a hatch in a bus at work, and they did the job [emoji106] The knife was used for opening som boxes and the file got used to file down a rivet. So far I'm liking the Handyman [emoji16]

Sent fra min FRD-L09 via Tapatalk
those pliers are stronger than we give them credit for...

Yes they are, was thinking the were just beefy tweesers but they actually are useful for minor things [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
#5 Not much use today, opened up some new discbrakes at work but the Handyman doesn't really shine when the job is that big. So just a "beauty" shot today.

Sent fra min FRD-L09 via Tapatalk
-
#6 Not much use today except for opening and cutting some dogtreats out in the woods


Sent fra min FRD-L09 via Tapatalk
-
#6 Not much use today except for opening and cutting some dogtreats out in the woods


Sent fra min FRD-L09 via Tapatalk
we have a thread for pets, and another for SAKs and dogs I believe, you could join with yours!!!

Don't have much photos of the dog and a SAK, as I don't trust him with sharp objects [emoji12]
Sent fra min FRD-L09 via Tapatalk
-
#7 Just cutting up a banana on the trail today, so I gave it a try to get a beauty pic again.

Sent fra min FRD-L09 via Tapatalk
-
#8 No use today as I've got the flu or something, probably just beauty pics the next few days.

Sent fra min FRD-L09 via Tapatalk
-

Maybe more people should get the flu?

-
If a flu is what it takes to slow down and smell the flowers, yes, probably. :)
-
You are probably right, most people are to busy too enjoy the simple things in life.
Sent fra min FRD-L09 via Tapatalk
-
I've been off the radar for a couple of days. I did keep up the challenge, made photo's whenever I could.
It was incredibly busy at work, I actually had to do some work >:( I don't get paid enough for this!
On the bright side, I had a long weekend off. Had to do some work at my vacation house and we spend a couple of nights in a hotel. Unfortunately the wifi was wonky at best and my mobile internet connection had pracitcally zero reception there :(
I've got a little moment now, so I have time to catch up.
Please excuse me for putting it all in one post.Day 4
Not much action for the Handyman. I ran my a$$ off at work. Saw some time to go to the bathroom.
However, some genius removed the hooks from the door and since I can't put my white coat on the floor I had to pull a classic one: using a multitool to create a hook.
Microscrewdriver coathangerDay 5
Again, crazy at work. In the evening I used the pen to draw a map to explain some things.
After about 20 years of carry I replaced the scales on my Handyman with plus scales, thus adding a pen and a pin.
Both are used frequently.
Pen in actionDay 6
What day is it? Friday! I woke up early thinking I had to go to work, but nothing could be further from the truth, I have a day off. As I wrote before I had some work to do in my vacation home which is on the other side of the country. We expected the weather to be rather cold, so we stayed in a hotel. Before we drove off I replaced the batteries in my keychain light.
Microscrewdriver, Handyman, Photon FreedomDay 7
The work that had to be done was taking down part of a bed (3 beds above eachother) to make room for a double bed on the bottom. This is no job for a Handyman and I had to bring out the big(ger) guns.
Over the winter, mice nested in our cushions and we had to throw them out. We had one bin-bag left so my dad drove to the store to get some more. I got bored and decided to make a fire.
I've done bow-drill fired before but could not find any string. So I opted for a hand powered one instead.

I used the saw to break up some pine in managable pieces. The storm earlier this year brought down enough big branches.
Pocketknives are not suited for battonning, but you can improvise. I cut two narrow slits with the saw, then make a shallow cut in the same direction with the large blade. I cut a small wedge from another piece of pine and stuck it in the slit.

A few taps with another log and presto, a fire board!

I used the awl to make a small hole, once through I drilled from the other side. With the saw I made a v-cut. Don't make it to wide. Finally, with the small blade I made a conical cavity for the drill to fit into.

I stripped a straight piece of branch of it's bark with the large blade and cut a conical tip at the end.
Unfortunately, this was also the end of my fire-making attempt. My dad got back and we were a little pressed for time because we had a dinner reservation and lots f work to do!
Day 8
I didn't get any use out of my Handyman this day. Sadly, my fire-starting attempt has left a lot of the tools gunked up with resin. I'll be able to easily clean it at work, where we have alcohol dispensers everywhere. I need to refill the alcohol prep-pads I usually carry in my bag. -
Good to have you back! And clever uses of the Handyman [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
#9 Used it to whittle my first face/tiki/skull looking thing [emoji12] Bonus beauty pic and one with my company when I was whittling [emoji16]



Sent fra min FRD-L09 via Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login