Do I need a sharpening system?
-
Yep, but I was trying to make it cheap and simple, nothing special needed except some 'sand paper'
(If you listen carefully you can hear old blokes rolling in their graves, saying 'sand paper? Sand Paper? that's for budgies cages'
) -
Got to try this.

-
Hmm
interesting..
JR -
This isn't just for JR it's for anyone who wants to try some sort of jig/system
If you like it you can upgrade the prop to a nice bit of wood and insert some dowels for different angles
Make more sanding sticks with different grades of paper
Replace the sticks with diamond 'stones'
Up size it for bigger knivesEverythings adjustable ;)


400grit wrapped around my diamond stone

-
Nice idea Tony

Have you considered putting some of your ideas on the you tubes? They would make excellent 'how to's'
-
Sounds a bit like hard work to me Mate

Although it has been said I do look like a movie star from some angles

-
@Sparky415 said:
Sounds a bit like hard work to me Mate
Although it has been said I do look like a movie star from some angles

Horror movies?

-
Now that’s interesting to get the right angle..
JR -
Sounds a bit like hard work to me Mate

Although it has been said I do look like a movie star from some angles

Horror movies?

cough Elephant man cough cough
-
@Pablo O'Brien said:
Sounds a bit like hard work to me Mate

Although it has been said I do look like a movie star from some angles

Horror movies?

cough Elephant man cough cough
Is it weird that I instantly understood what you meant?
I thought Rocky Dennis from Mask,,
JR -
@Pablo O'Brien said:
[quote author=Sparky415 link=topic=76719.msg1671599#msg1671599 date=1522856903]
Sounds a bit like hard work to me Mate
Although it has been said I do look like a movie star from some angles

Horror movies?

cough Elephant man cough cough
Is it weird that I instantly understood what you meant?
I thought Rocky Dennis from Mask,,
JR
[/quote]
Nope that’s not it. This case was much older and different, in Victorian times. -
I was really curious to see what alternatives to a sharpening system I would discover here.
...Only to find a DIY sharpening system
-
@MadPlumbarian said:
Now that’s interesting to get the right angle..
JRDo you mean the uni-strut 'prop' JR?
Again you just move it forwards until you have the desired angle -
I was really curious to see what alternatives to a sharpening system I would discover here.
...Only to find a DIY sharpening system
But it's a system you can make for yourself, it can be as simple or as complicated as you like

I just always thought using a stone was a way to get a sharp edge, but I guess 1000grit paper on a block is the same as a 1000grit stone..
JR -
Now that’s interesting to get the right angle..
JRDo you mean the uni-strut 'prop' JR?
Again you just move it forwards until you have the desired angleYeah, move it down to the lower hole to narrow the pitch
JR -
Now that’s interesting to get the right angle..
JRDo you mean the uni-strut 'prop' JR?
Again you just move it forwards until you have the desired angleYeah, move it down to the lower hole to narrow the pitch
JRIn this case you find the hole which is close enough then move the thing backwards or forwards half an inch at a time
You get very fine adjustment
You could sharpen a big knife at a fixed angle then move the prop forward half an inch to add a micro bevelDon't get caught up in the idea that you <u>need</u> various holes a brick will be fine

-
Now that’s interesting to get the right angle..
JRDo you mean the uni-strut 'prop' JR?
Again you just move it forwards until you have the desired angleYeah, move it down to the lower hole to narrow the pitch
JRIn this case you find the hole which is close enough then move the thing backwards or forwards half an inch at a time
You get very fine adjustment
You could sharpen a big knife at a fixed angle then move the prop forward half an inch to add a micro bevelDon't get caught up in the idea that you <u>need</u> various holes a brick will be fine

Right, hole adjustment 10° Unistrut forwards or backward a inch = +/- 1°.. just a ballpark fig..
JR -
[quote author=MadPlumbarian link=topic=76719.msg1671666#msg1671666 date=1522861359]
Now that’s interesting to get the right angle..
JRDo you mean the uni-strut 'prop' JR?
Again you just move it forwards until you have the desired angleYeah, move it down to the lower hole to narrow the pitch
JRIn this case you find the hole which is close enough then move the thing backwards or forwards half an inch at a time
You get very fine adjustment
You could sharpen a big knife at a fixed angle then move the prop forward half an inch to add a micro bevelDon't get caught up in the idea that you <u>need</u> various holes a brick will be fine

Right, hole adjustment 10° Unistrut forwards or backward a inch = +/- 1°.. just a ballpark fig..
JR
[/quote]I've got an angle finder thingy somewhere, I will sort it out and experiment with it in the next couple of days

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login