Lynn's First SAK Mod Build
-
Thanks Pabs; I stand corrected.

-
No problem.

-
Awesome progress Lynn... can’t wait to see the finished project...
Hope you remembered to take pics of the parts?
Couldn’t find the pics I took for my master craftsman build, but here’s a pic of th parts that went into the Master Ranger build... just ignore the inline phillips layer...

Sent from my iPhone using Tapatalk
-
Pablo... interesting. Thanks.
However, anodized or not, the liners on that older Huntsman are shot. I'm interested to know now if the only unbroken one was the theoretically anodized one.
jaya_man... I posted the pics of the knives taken apart already in the thread. I actually used those pics once I cleaned the parts to reassemble layers already. I've taken apart enough tools (and forgotten to document parts positions) to at least not fall into that particular trap. But thank you for reminding me.
Hiraethus, thanks on that description of peening.
It was about to come up in my 'I don't know what I'm doing' list of questions. Saves me from looking (more) stupid. :DTo all, please don't feel like i'm ignoring your post if i don't respond directly. I'm reading them all, and taking them all in.
-
Next thing...
I... heh... I don't own a peening hammer, apparently.
And as it seems I've been forced into chemical warfare against my shower stall today, I don't know that I'll be able to get out to get one today. So, today, no progress.
-
That's ok we will wait

-
Awesome job! I have only done one SAK mod and after a couple years carry the scissors broke so I will redo that at some point.
One suggestion I heard here and tried was to put the brass pin in a drill then peen the end as it spins. Takes a while but then you get one side done outside the knife. You could even slide a bushing on the pin before you start so you know when the mushroom is the right size. I did not try that fearing the bushing would fly off!
I used a cordless drill with variable speed and it worked great using a small hammer.
-
@Lynn LeFey said:
Next thing...I... heh... I don't own a peening hammer, apparently.
And as it seems I've been forced into chemical warfare against my shower stall today, I don't know that I'll be able to get out to get one today. So, today, no progress.
Lynn seems to have lost the battle against the shower stall since we havent heard from him since... We are confident he fought bravely using his SAK...

Hey, that's an idea for a new useful tool on a SAK; a gas mask!

-
@Toppskarven . said:
@Lynn LeFey said:
Next thing...
I... heh... I don't own a peening hammer, apparently.
And as it seems I've been forced into chemical warfare against my shower stall today, I don't know that I'll be able to get out to get one today. So, today, no progress.
Lynn seems to have lost the battle against the shower stall since we havent heard from him since... We are confident he fought bravely using his SAK...

Hey, that's an idea for a new useful tool on a SAK; a gas mask!


P.S, Lynn is a She. ;)
-
Sorry for the delay in response.
Yes, Lynn is indeed a she.
Second, there is SOME progress but my garage, where I'm doing the peening work, is unheated, and it's been very cold here the last couple days.
Still...
<a href="https://flic.kr/p/25PTknP" target="_blank" rel="noopener noreferrer"><img src="https://farm1.staticflickr.com/880/41236010821_fac6911391_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>I am not all that happy with my work. I think I slightly bent both pins in the process, so... (sigh). I'm not sure if i should proceed as is or cut off what I've done and try again.
-
Those pinheads (lol) don’t quite look like they’ll fit in the brushings.

Maybe try peening while the pins and brushings are in the assembled knife?

What’s the worst that could happen? :D -
@Lynn LeFey said:
@Pablo O'Brien said:
Those pinheads (lol) don’t quite look like they’ll fit in the brushings.

I peened them WHILE the pin was in a bushing, so...

Toppskarven... it's all good.

I guess it will work then.

I just didn’t remember what it’s supposed to look like when peened to fit a brushing. :D
-
I would cut them off (and the bent part) and try again Lynn. I will look for some pics to show what you're after.
-
If I may offer some friendly advice...
When I modded my Compact to swap the corkscrew for a Phillips, I found that I got the best results when peening by using light taps and focusing on the center of the brass rod until it started to mushroom. Go slow and don't try to move the brass too much, too quickly. It will take you longer, yes, but the results will be better.
Once the rod starts to mushroom out, start to peen around the edges... again using light taps and not over-working the brass.
Another thing I did that you might want to consider is to get some larger diameter brass rods to practice on. I really feel like practicing peening the larger diameter rod helped me get better results when the time came to do it for real. Good luck, and keep at it!

-
@Lynn LeFey said:
Sorry for the delay in response.Yes, Lynn is indeed a she.
Second, there is SOME progress but my garage, where I'm doing the peening work, is unheated, and it's been very cold here the last couple days.
Still...
<a href="https://flic.kr/p/25PTknP" target="_blank" rel="noopener noreferrer"><img src="https://farm1.staticflickr.com/880/41236010821_fac6911391_z.jpg" alt="banner" style="max-width: 100%; height: auto;" /></a>I am not all that happy with my work. I think I slightly bent both pins in the process, so... (sigh). I'm not sure if i should proceed as is or cut off what I've done and try again.
Yeah, certainly the bottom one looks bent. I'm not sure why you'd do one side and not finish the knife though. After disassembly, cleaning and reassembly the peening is the easy bit.

-
So...
I'm sorry. I'm am profoundly angry and confused at this point. How the living SMURF are you supposed to peen F-ING ANYTHING on this F-ING tool? I have absolutely no idea how to peen the tool once assembled, because I'd just be banging the F-ING rod into a flat surface on the bottom side, and the layers, not being solidly held together, aren't going to support the pin staying straight any more than clamping it in a vice.
I absolutely see no way of doing this without peening one side before assembly.
I want you all to understand, I am LEGITIMATELY pissed at all of this at the moment. This was supposed to be fun. This is not fun. I am not having fun. This is not Lynn's 'I'm havng fun' face.

-
Have you tried wrapping the tool in tape to stop it flopping around when you hammer it?
Do you have some heavy metal thing to use as an anvil?Peening can be a smurf in the behind sometimes. :ahhh
-
@Pablo O'Brien said:
Have you tried wrapping the tool in tape to stop it flopping around when you hammer it?
Do you have some heavy metal thing to use as an anvil?Peening can be a smurf in the behind sometimes. :ahhh
To echo Pabs, an anvil will make your peening a lot easier Lynn. Do you have a flattish hammer you can use to peen on? Before Sparky hooked me up with a Vice with an anvil, I used to peen on my Estwing hammer - worked really well.
That way you are kind of peening both ends at the same time. What you're after is a mushroom shape on the pin - do one end, turn over and do the other, gently each time, and file the top so you are shortening the pin while 'filling' the bushing.
Use light 'strokes' of the hammer around the edges of the pin and you'll soon see a mushroom shape appear.
Once the pin is nice and tight inside the bushing and is filed level, I use a wide centre punch to finish with. This should ensure that the pin fills the bushing.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Sorry... I'll start viewing peoples profiles and stop assuming..
.