Do I need a sharpening system?
-
I was really curious to see what alternatives to a sharpening system I would discover here.
...Only to find a DIY sharpening system
But it's a system you can make for yourself, it can be as simple or as complicated as you like

I just always thought using a stone was a way to get a sharp edge, but I guess 1000grit paper on a block is the same as a 1000grit stone..
JR -
Now that’s interesting to get the right angle..
JRDo you mean the uni-strut 'prop' JR?
Again you just move it forwards until you have the desired angleYeah, move it down to the lower hole to narrow the pitch
JR -
Now that’s interesting to get the right angle..
JRDo you mean the uni-strut 'prop' JR?
Again you just move it forwards until you have the desired angleYeah, move it down to the lower hole to narrow the pitch
JRIn this case you find the hole which is close enough then move the thing backwards or forwards half an inch at a time
You get very fine adjustment
You could sharpen a big knife at a fixed angle then move the prop forward half an inch to add a micro bevelDon't get caught up in the idea that you <u>need</u> various holes a brick will be fine

-
Now that’s interesting to get the right angle..
JRDo you mean the uni-strut 'prop' JR?
Again you just move it forwards until you have the desired angleYeah, move it down to the lower hole to narrow the pitch
JRIn this case you find the hole which is close enough then move the thing backwards or forwards half an inch at a time
You get very fine adjustment
You could sharpen a big knife at a fixed angle then move the prop forward half an inch to add a micro bevelDon't get caught up in the idea that you <u>need</u> various holes a brick will be fine

Right, hole adjustment 10° Unistrut forwards or backward a inch = +/- 1°.. just a ballpark fig..
JR -
[quote author=MadPlumbarian link=topic=76719.msg1671666#msg1671666 date=1522861359]
Now that’s interesting to get the right angle..
JRDo you mean the uni-strut 'prop' JR?
Again you just move it forwards until you have the desired angleYeah, move it down to the lower hole to narrow the pitch
JRIn this case you find the hole which is close enough then move the thing backwards or forwards half an inch at a time
You get very fine adjustment
You could sharpen a big knife at a fixed angle then move the prop forward half an inch to add a micro bevelDon't get caught up in the idea that you <u>need</u> various holes a brick will be fine

Right, hole adjustment 10° Unistrut forwards or backward a inch = +/- 1°.. just a ballpark fig..
JR
[/quote]I've got an angle finder thingy somewhere, I will sort it out and experiment with it in the next couple of days

-
[quote author=Sparky415 link=topic=76719.msg1671775#msg1671775 date=1522867557]
[quote author=MadPlumbarian link=topic=76719.msg1671666#msg1671666 date=1522861359]
Now that’s interesting to get the right angle..
JRDo you mean the uni-strut 'prop' JR?
Again you just move it forwards until you have the desired angleYeah, move it down to the lower hole to narrow the pitch
JRIn this case you find the hole which is close enough then move the thing backwards or forwards half an inch at a time
You get very fine adjustment
You could sharpen a big knife at a fixed angle then move the prop forward half an inch to add a micro bevelDon't get caught up in the idea that you <u>need</u> various holes a brick will be fine

Right, hole adjustment 10° Unistrut forwards or backward a inch = +/- 1°.. just a ballpark fig..
JR
[/quote]I've got an angle finder thingy somewhere, I will sort it out and experiment with it in the next couple of days

[/quote]
Ok, hope you have fun, idk what I got laying around to make something, that and I think the finest grit I have is 400, either that or only 250.
JR -

except

-
Sparky., Another great write up! Sandpaper on your jig is a nice setup on the cheap adding a diamond plate that's just sweet
. I think if you were to make a leather strop for your jig it would be great for touch-ups and final polish.
51 -
Thanks Mike

I use a free hand strop (belt on a batten) but that's the point
you make what ever you need -
Thinking a bit more about this 'system'
People are thinking too much about angles,
knowing an angle and being able to find an angle can be usefull but to re-sharpen a knife we just need to follow the existing grindAll we need to do is line up the surface of the sand paper until its the same as the cutting bevel
I'm too steep here

Better but a bit shallow

Hitting the bevel now (sorry for the poor picture)
I would carry on and sharpen the whole edge at this angle

We didn't need to know the angle to sharpen this chopper and we still don't but for curiosity's sake

And just for JR
The prop/brick is 4" high
At 14% (I don't have a degrees sign
)
The prop is 15 1/2" back from the cutting edgeAt 17%
The prop is 12 1/2" back from the cutting edgeAt 20%
The prop is 10 1/2" back from the cutting edgeHope this is useful to someone

-
Nice Tony !

On a PC you can get the degree sign by holding down ALT then hit Numb Lock on the number keypad and type 248 like this °
-
I use ALT + 0176 = ° or ALT + 0186 = º

-
You kids with your new fangled gadgets

Thanks Guys

-
Interesting! ( ͡° ͜ʖ ͡°)
JR -
@Sparky415 said:
Thinking a bit more about this 'system'
People are thinking too much about angles,
knowing an angle and being able to find an angle can be usefull but to re-sharpen a knife we just need to follow the existing grindAll we need to do is line up the surface of the sand paper until its the same as the cutting bevel
I'm too steep here

Better but a bit shallow

Hitting the bevel now (sorry for the poor picture)
I would carry on and sharpen the whole edge at this angle

We didn't need to know the angle to sharpen this chopper and we still don't but for curiosity's sake

And just for JR
The prop/brick is 4" high
At 14%** (I don't have a degrees sign **
)
The prop is 15 1/2" back from the cutting edgeAt 17%
The prop is 12 1/2" back from the cutting edgeAt 20%
The prop is 10 1/2" back from the cutting edgeHope this is useful to someone

Now you do. :D
Right side Alt key.
Alt 248 ° -
Very nice system Sparky
Sandpaper was a good choice for this project

-
Hey Sparky hows this? What the heck do you do with this, I mean heck is it even worth doing anything with if it chips that bad cutting an ear of corn?
JR
-
See reply no200 here,
It's worth a try just to see what happens JR
/topic/29267
-
No one is using 'my system'
so I guess I will have to do another knifeThat one at the front
Nice old penknife with brass liners

Regrind the blade profiles
Looking better

Screw it to a bit of wood

That was no good as the sand paper was hitting the washer
Add some scraps of wood and a piece of leather to protect the knife

The blades had almost a chisel grind originally so I went with that
Poor pictures but it has turned out razor sharp :D

Nice little knife


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
