Side-by-Side Comparison Photo Request Thread - Ask for them here
-
Handyman with XLT:


-
Here's a Midnite Manager beside an Alox Minichamp.

-
@TennTexan said:
Here's a Midnite Manager beside an Alox Minichamp.
Thank you! -
Here’s another side by side comparison pic...
(L-R): Custom Ti Rambler, Rambler, Manager and Midnite Manager

-
Nice J man!! I love this thread! -
Fieldmaster, Farmer, Cadet, Pioneer, Super Tinker, SwissChamp



-
Doing some side-by-side comparisons of 4 SwissChamps:
Second and third seem to have the thicker tang on the main blade (left side), I need to find out which years have this.
The third has the thinner pliers.
Fourth set is the only one with the clear magnifier and shorter inline Phillips.

-
@FolderBeholder said:
Doing some side-by-side comparisons of 4 SwissChamps:Nice comparisons FB!

-
Single Layer Ribbed Alox:
This is not comprehensive. It represents what I have that can be photographed and measured. I used Harbor Freight Pittsburgh composite calipers which, if you know Harbor Freight, are anything but NIST calibrated. They are, however, not too shabby for cheap composite material calipers. I use them for measuring things that mar much too easily from tool steel calipers such as knives, watches, etc.
These single layer ribbed Alox represent what I call "Gentlemen's Knives". They're slim, relatively small, and disappear in a front pocket. The ribbed Alox has some class as well. IMHO it's a slight step up from smooth Alox and a just a little more up from Cellidor. Hardly noticeable until you need to open a box, a letter, or peel an apple or an orange, or perhaps cut a candy bar in half (or more parts) for the kids. (If they're old enough to cut it themselves, and there are two, give one the knife and let him cut it; the other gets to pick which half he wants.) For those that want to protect the finish from keys and coins, they can fit into a thin leather slip and still disappear in the pocket.
First, to get a feel for their shape and relative sizes, here they are face up . . .

Now for their thicknesses . . .

The 75mm Beginner is the thinnest knife I've ever seen. I thought I had seen thin with the Sentry and Excelsior, and then the Beginner arrived. Note that the Sentry and Excelsior are the same thickness and the Excelsior has two blades. I've used arrows to show how Vicotrinox managed to fit the opposing blade without increasing thickness by using a spacer and thinning the large blade at the tang slightly. Provides the necessary space for the small pen blade.
I have a 74mm Prince and didn't depict it here because it has stainless steel scales, not ribbed Alox. It falls between the Bantam and Solo at ~6.3mm thick (varied +/- 0.1mm depending on where it was measured; one end, the other end, or the middle). Another Gentleman's Knife albeit a little different from these but still with plenty of class:

John
-
Side by side comparison of various 58mm:
* Classic * Signature (Classic with pen) * Signature Lite (Classic with pen and light) * Rambler * MiniChamp * Midnight MiniChampThe pen and light dramatically increase width. The light with its cell adds a bit more than the pen does compared to toothpick and tweezers scales.

Not shown are the Manager, a Rambler with pen, and the Midnite Manager, a Rambler with pen and light. One can deduce from the Classic, Signature and Signature Lite that their widths would be (approximately):
* 10.3mm - Rambler * 11.9mm - Manager (Rambler with pen) * 13.7mm - Midnite Manager (Rambler with pen and light)John
-
- Classic
- Signature (Classic with pen)
- Signature Lite (Classic with pen and light)
- Rambler
- MiniChamp
- Midnight MiniChamp
The pen and light dramatically increase width. The light with its cell adds a bit more than the pen does compared to toothpick and tweezers scales.

Not shown are the Manager, a Rambler with pen, and the Midnite Manager, a Rambler with pen and light. One can deduce from the Classic, Signature and Signature Lite that their widths would be:
- 10.3mm - Rambler
- 11.9mm - Manager (Rambler with pen)
- 13.7mm - Midnite Manager (Rambler with pen and light)
John
Thank you! 
-
How I made that photo is posted here in this thread:
</post/1676992>
John
-
Now this is a thread!

...and all these pics!
:DI got one. If anyone has 74mm Escort, I would like to see thickness comparison with Ambassador. Been searching one and it would help decide. :)
I know its not a common one, so, sorry.
What else is similar to an Escort? I have an Ambassador....maybe I can get close.
In 74mm I have a Cellidor Prince, Stainless Steel Prince, Ambassador and Executive. The 74mm Escort has been retired for some time now. The Cellidor Prince is probably about the same as an Escort in dimensions as it's a single layer. It's an Escort with a small blade added opposite the large one, T&T and keyring added. The other side has the same fingernail cleaner and nail file. I'll do up a comparison of the four. A Prince might be easier to find compared to an Escort.
Getting them all on edge may be the challenge ;)
John
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

