Multitool TLC
-
Simple thread, just currious to here how you all take care of your tools.

So, how do you clean, lube, and rustproof your tools? How do you sharpen the blades? What else do you do to keep your tools in tip-top shape? Also, what have you tried that didn't work or you don't do anymore?If a tool is dirty/rusty, I clean it with WD-40. I also use toothpicks and q-tips. A great cleaning tool I've been using recently came with my electric shaver- it just a two sided brush with stiff plastic bristles and it works great in tight spots!
To lube and prevent rust, I've been using normal 3-in-1 on a lot of my tools and miltec on the more expensive ones. I think I'm about to ditch the Miltec- it works ok, but seems gritty sometimes and I'm not seeing any good reason to spend $9 a bottle instead of using my trusy 3-in-1.
I sharpen with a sharpmaker I've had for a while now, but I still feel like I'm learning with it everytime I use it. It's done great for everything but the tips. They're still giving me problems, but I'm getting better.
-
Here's a "Care and Feeding" article I wrote for SOSAKOnline:
http://www.sosakonline.com/index.php?option=com_content&task=view&id=127&Itemid=35
It's written for SAKs, but it's the same process for multitools.
Def
-
Using floss around those extremely tight spaces around the pivot of the pliers really clean out the black gunk that builds up there.
I use 3-in-1 oil also every other week or two on my daily multitools, depending on how hard I use them. And the old toothpick and Qtip come in handy

-
I actually abuse my tools and have to Maintain them quite often. I use brake cleaner to drive all the gunk out, and then oil with Marvels mystery oil. If there is rust or really stubborn stuff I have been known to run them through the parts cleaner at work and give them a thorough douche to get all the crap out. To sharpen I use the Smith diamond pen. It is a great little gismo that does serr and strait blades with ease.
-
I'm do pretty much the same as you guys with the WD40, Rem-Oil instead of 3-in-1 oil, toothpick and Q-tips. Never tried that floss idea, I'll have to give it a whirl next time.
The foreign substance that I despise the most in my multitool though is sand! Gritty, grindy, sand. Even one grain between the pivots gives me the heebie-jeebies.

I keep a small aerosol can of compressed air at my workbench to blow out my tools when needed. They sell the stuff rather cheaply at most office supply stores.
-
x2 on the sand. I hate that stuff! I once got some sand in my KF4, and it got up in between the aluminum scales and the steel liners. If I squeezed the handles I could hear the "scrape scrape" of the sand.
It eventually all worked its way out though. I also think I'll give that floss idea a try. -
-
Sand is nasty stuff. Few things send shivers up my spine like that grinding sound of solid grit in a SAK or multi. That's why I almost never take a SAK to the beach. If anything breaks there, well then that's just too bad!
Regular grit is terrible too, but sand is the bane of my tool existence. I almost long for poorly made tools when dealing with sand as the giant gaps allow for easier cleaning!
Def
-
@Defender said:
Sand is nasty stuff. Few things send shivers up my spine like that grinding sound of solid grit in a SAK or multi. That's why I almost never take a SAK to the beach. If anything breaks there, well then that's just too bad!Regular grit is terrible too, but sand is the bane of my tool existence. I almost long for poorly made tools when dealing with sand as the giant gaps allow for easier cleaning!
Def
Or carry a SOG when around sand...breaks down in two minutes.

I dropped a SAK in some dirt a few weeks ago while digging (it was in my front pocket)...GRIT! I gave it a good wash and it came out fine. Good thing the soil was kind of moist...it really didn't sneak between the impliments.
-
In my former life as a home brewing supply store manager I used to have access to a nice little pressurized water jet that I found to be very good for cleaning SAKs. It was a great little model that was adapted form a dental water drill, and it would clean anything. I am going to have to see if I can find another one one of these days...
Def
-
@knife-man said:
Toothpicks and Q-tip's indeed ::) :D.Uh oh, sounds like a normal person walked in on this conversation.
If I heard that some guy at work cleaned his normal tools that way, I'd think he was a little off his rocker, but here I am doing the same thing!
Now I want to go see if I can find my old water jet I had in junior high for my braces! 
-
I actually use Q Tips as well, although now I'm a little embarrassed to admit it!
Does it help if I say that I use a multi to squish the heads so they fit down inside the channels of a SAK?
Def
-
-
-
I also use the little stiff brush you get with electric razors . Also I find Bluetack ( the stuff you use to put up posters ) , just push it in the the hard to reach areas and when you pull it out the crap sticks to it . A good wash with washing up liquid , a rinse then a hair dryer and a little oil ( like 3-in-1 ) but not too much . Compressed air is good too .
Dunc
-
Flush the tool under the tap full on, dry it (and myself) with kitchen roll. When dry a large dollop of 3 in 1 oil (or Bisley gun oil) on the edge of the blades were they fit on the axles another on the center of the plier/cutter head, wiggle them about to spread it down into the jionts, then wipe all the excess off. Tried using liquid paraffin but too gungy so I am back to 3 in 1. Every now ad again I poke some oil into the inside of the pouch and spread it as best I can to try and stop any moisture build up. The water shifts all the muck out if any is sticking I will douse it with boiling water from the kettle and straight under the jet of cold water again, no tools needed and only takes about 5 minutes per tool.
Works for me and I use Gerbers.Dave
-
Okay, sounds like we've got several good suggestions about cleaning out the crud.
How about rust? What works best for getting rid of the little spots and speckles?
(SwissTool users, please bite your tongues!)
-
On my Leathermans I used wire wool and WD-40 .
Dunc
-
@J-sews said:
Okay, sounds like we've got several good suggestions about cleaning out the crud.How about rust? What works best for getting rid of the little spots and speckles?
(SwissTool users, please bite your tongues!)
What's rust? >:D
Is that what you get when you send a LM back for repair? >:D
Serious= Dunc has it right but I have also heard that if metal is badly rusted leave it in the freezer overnight. When it has a nice frost on the surface rub with wire wool. Never had to use it myself but apparently it lifts the rust to make it easier to polish away.Dave
-
WD-40 and a good wipe are all I've ever needed to get rid of rust... but I've never had a severely rusted tool. I'd be curious to here tips on this as well, especially how to get rust out of hard to clean areas where it can go untouched.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login