Handyman Challenge
-
Day 10
Desk duty today. I had the tedious task of importing data from CD-ROM. These things come by mail so the Handyman doubled as mail-opener. Because of privacy reasons I can't make a photo of this.
Every now and then I had to stop for a coffee. I'm getting used to the Nanopresso and cleaning it afterward is a breeze now.
I put my Handyman beside it when I was not using it for opening letters.
During the day I saw some photo opportunities, those were posted in other threads.
Handyman and NanopressoBack at home it opened a few packages, nothing all that special.
-
#11 Just opening a new dustsucker (vacuumcleaner) and some other small cutting tasks. So another beauty pic.

Sent fra min FRD-L09 via Tapatalk
-
Just hanging around today then RF52

-
This is an excellent challenve thread.

-
Day 11
No photo's today I'm afraid. I recall some minor cuttings tasks, like opening a package.
Again hard work today and zero time to think about anything else. When I got home, all I wanted to do was sleep.
Sad story? Perhaps. But I need to work in order to get money for SAKs, so It's all worthwhile.
-
#12 Opening some boxes and bags today at work, like this box of new brakepads [emoji106]

Sent fra min FRD-L09 via Tapatalk
-
Day 12
Not much to report. Of course, my Handyman has kept me company the entire day, but apart from some package opening it didn't see much use.
We're one third in the challenge and I can say the Large Blade get's the most use up until now.
Both of us are eagerly awaiting the arrival of a SwissCard. When it does the Handyman has a package to open and I something to put on a shelf :) -
@RF52 said:
#12 Opening some boxes and bags today at work, like this box of new brakepads

Sent fra min FRD-L09 via Tapatalk

Just recently did complete brake job on all four wheels of my car, replacing everything: rotors, pads, calipers and caliper brackets. Opened a couple of boxes of the parts with the SAK, and used it to fiddle with the pressure bleeder to get it working a little better, but alas, I needed some much bigger tools for the complete job. ;)
Your photo reminded me of how much a PITA bleeding out a modern ABS module can be without the magic electronic box (that costs hundreds of $$$) to set all the tiny pistons in the ABS module to TDC. There's a workaround but it's time consuming and uses more brake fluid.
Hope the brake job went well!
John
-
#12 Opening some boxes and bags today at work, like this box of new brakepads


Sent fra min FRD-L09 via Tapatalk

Just recently did complete brake job on all four wheels of my car, replacing everything: rotors, pads, calipers and caliper brackets. Opened a couple of boxes of the parts with the SAK, and used it to fiddle with the pressure bleeder to get it working a little better, but alas, I needed some much bigger tools for the complete job. ;)
Your photo reminded me of how much a PITA bleeding out a modern ABS module can be without the magic electronic box (that costs hundreds of $$$) to set all the tiny pistons in the ABS module to TDC. There's a workaround but it's time consuming and uses more brake fluid.
Hope the brake job went well!
John
Since I'm a bus mechanic it's supposed to be air in the brake system [emoji106] But I know what you mean, bleeding brakes is always sketchy and usually ends up with having to buy som bits and pieces [emoji12]
Sent fra min FRD-L09 via Tapatalk
-
#12 Opening some boxes and bags today at work, like this box of new brakepads


Sent fra min FRD-L09 via Tapatalk

Just recently did complete brake job on all four wheels of my car, replacing everything: rotors, pads, calipers and caliper brackets. Opened a couple of boxes of the parts with the SAK, and used it to fiddle with the pressure bleeder to get it working a little better, but alas, I needed some much bigger tools for the complete job. ;)
Your photo reminded me of how much a PITA bleeding out a modern ABS module can be without the magic electronic box (that costs hundreds of $$$) to set all the tiny pistons in the ABS module to TDC. There's a workaround but it's time consuming and uses more brake fluid.
Hope the brake job went well!
John
Since I'm a bus mechanic it's supposed to be air in the brake system
But I know what you mean, bleeding brakes is always sketchy and usually ends up with having to buy som bits and pieces 
Sent fra min FRD-L09 via Tapatalk
Those did look like some rather large pads. Thought it might be camera angle and perspective, but obviously not!
John
-
#12 Opening some boxes and bags today at work, like this box of new brakepads


Sent fra min FRD-L09 via Tapatalk

Just recently did complete brake job on all four wheels of my car, replacing everything: rotors, pads, calipers and caliper brackets. Opened a couple of boxes of the parts with the SAK, and used it to fiddle with the pressure bleeder to get it working a little better, but alas, I needed some much bigger tools for the complete job. ;)
Your photo reminded me of how much a PITA bleeding out a modern ABS module can be without the magic electronic box (that costs hundreds of $$$) to set all the tiny pistons in the ABS module to TDC. There's a workaround but it's time consuming and uses more brake fluid.
Hope the brake job went well!
John
Since I'm a bus mechanic it's supposed to be air in the brake system
But I know what you mean, bleeding brakes is always sketchy and usually ends up with having to buy som bits and pieces 
Sent fra min FRD-L09 via Tapatalk
Those did look like some rather large pads. Thought it might be camera angle and perspective, but obviously not!
John
No, they are kind of big atleast compared to brakepads on a car [emoji106] But compared to a locomotive they aren't that big again [emoji12]
Sent fra min FRD-L09 via Tapatalk
-
#13 The knife saw some use today, cutting a hose and a firewarning sticker so I could change it.


Sent fra min FRD-L09 via Tapatalk
-
#13 The knife saw some use today, cutting a hose and a firewarning sticker so I could change it.


Sent fra min FRD-L09 via Tapatalk
thin slicey blade, the hose didn't stand a chance

I was a bit surprised how easy it cut through the hose, it did a very good job on that [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
#14 Nothing much today so a pic from a walk in the woods with the dog

Sent fra min FRD-L09 via Tapatalk
-
#15 No use today, just a couple of pics to show the spring [emoji16]


Sent fra min FRD-L09 via Tapatalk
-
#13 The knife saw some use today, cutting a hose and a firewarning sticker so I could change it.


Sent fra min FRD-L09 via Tapatalk
thin slicey blade, the hose didn't stand a chance

I was a bit surprised how easy it cut through the hose, it did a very good job on that

Sent fra min FRD-L09 via Tapatalk
I discovered that myself with reinforced hose! It is a bit amazing what a truly sharp blade will do.
John
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login