Which Multitool for a Nurse?
-
Rebar is certainly a good option, but I'll also throw in a Spirit with an aftermarket pocket clip. It has a knife, but the standard version has that "butter blade" with lack of a scary stabby point. Might not make a difference in knife-free zones (not that a hospital really is, seeing as it's chock full of scalpels) but if you can get away with it the Spirit is a high quality, very versatile option.
-
I'm going to go the opposite route to the guys and suggest you do do a mod!
ThundaBeagle suggested the classic PST2,which is super pocketable. I converted two to KSTs...my own bladeless mod,replacing the blade with an awl. It would require getting a PST1 and 2,but eBay is good for donors!
Likewise the old Fuse is for my money a far better tool than the Rebar,and likewise easily modded,although there was a bladeless version.
The old SOG PPP and the Gerber MP400+600 are super easy to mod too!
-
@kirk13 said:
I'm going to go the opposite route to the guys and suggest you do do a mod!ThundaBeagle suggested the classic PST2,which is super pocketable. I converted two to KSTs...my own bladeless mod,replacing the blade with an awl. It would require getting a PST1 and 2,but eBay is good for donors!
Likewise the old Fuse is for my money a far better tool than the Rebar,and likewise easily modded,although there was a bladeless version.
The old SOG PPP and the Gerber MP400+600 are super easy to mod too!
I had always wanted to replace the blades on the PSTs with something else but removing it means it will leave a gapping hole on the handle frame. Doesn't look nice aesthetically, thats what bothering me. Replacing with a saw is a option but I almost never use a saw.. And a saw is also somewhat a blade..
-
Zed works in nursing homes - he may be able to give some practical advice
-
I vote for the bladeless Rebar.
-
Funny story, I walked into a high voltage electrical transformer factory that said "No Weapons Allowed", which meant I had to leave my EDC in the car. Everyone had a folding box cutter (with the knife clipped as to where it was visible), and some of the biggest scissors I'd seen in my life (at least 12" blades) were everywhere. I'm sure my small (sub 3") pocketknife wouldn't be nearly as bad as if those scissors got used as a weapon.
I usually carry an older Pocket Power Plier. I guess because my wallet and such squeezes it in the pocket, it doesn't open. But I'm sure a hasp of some sort to keep it closed could be rigged up. I suggest ditching the partially serrated blade for an electrical wire stripper, which would make it bladeless. Plus, in a custom configuration, with SOGs, the warranty is not voided.
There is also the SwissTech tools and the Sebertool M2 and M3 (which don't have anything but screwdrivers and pliers), but those might be too small for your preferences (but the pliers are quite sturdy, though it's hard to get good leverage with their small size).
-
Juice s2

-
I would second the idea of a Skeletool. Doesn't have to be the RX. It has the bit driver which to me is awesome when coupled with an extender. You can use the Leatherman flat bits or standard 1/4inch. The pliers are good enough for most jobs. The down side is the blade. I think if modding is something you would consider maybe removing the blade and adding scissors. I know you don't want to void the warranty.
-
@dks said:
Zed works in nursing homes - he may be able to give some practical adviceI actually work in that field as well, and I used to carry blameless MTs at work. But my work MT since sometime last year has been that funky Outu pliers/scissors tool, because I won't worry much if it gets damaged somehow and it has the basic stuff I often need in my work day. I must admit, it's been performing really well, to the point my overall opinion of it has improved.
-
Would something with a strap cutter be useful?
If only the OHT had a pocket clip.... -
@Sam Lim said:
I'm going to go the opposite route to the guys and suggest you do do a mod!
ThundaBeagle suggested the classic PST2,which is super pocketable. I converted two to KSTs...my own bladeless mod,replacing the blade with an awl. It would require getting a PST1 and 2,but eBay is good for donors!
Likewise the old Fuse is for my money a far better tool than the Rebar,and likewise easily modded,although there was a bladeless version.
The old SOG PPP and the Gerber MP400+600 are super easy to mod too!
I had always wanted to replace the blades on the PSTs with something else but removing it means it will leave a gapping hole on the handle frame. Doesn't look nice aesthetically, thats what bothering me. Replacing with a saw is a option but I almost never use a saw.. And a saw is also somewhat a blade..
I've added an awl...missing from the PST2
-
I would vote something pocketable and knifeless (either as a factory option or easily modded) so Fuse, Rebar and SOG PPP would be my first votes ;)
Then the Wingman family (easily de-bladed), PSTII, or other cheap MTs like the OUTU Scissors-Pliers head or the MP Series
, easy to mod and excellent quality build (and it won't matter if they don't lock closed because they'd be carried in a pocket sheath, caddy or pouch/holder/organiser so they'd remain shut) 
-
I vote for the juice. CS4 in this pic with a modified (reinforced) polycarbonate sheath. This is what I carry under my scrubs as a PA. Note the pager, only an academic institution would still require such "high tech" EDC gear. I'm also a 65DM3.

-
Paging Mr pa_strunk, paging Mr pa_strunk.
Man I haven't seen one of those in a while. So far I'm enjoying carrying my CS4. I am still a little uncertain about the darn flat drivers but so far so good.
-
Used to work in a hospital, and had a strict rule against weapons, including knives. Reason being an irate patient may grab it and hurt themselves or someone else. Every hospital I've visited also have a no weapons sign at their entrances, and even metal detectors on occasion. I'd go for a bladeless type, a Sog, Rebar, Fuse, or MP something.
-
Keep it simple....
Victorinox Swisstool Spirit X is the way to go!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



