Firefly Ferro rod.
-
So the pack was nicely wrapped and came with an explanatory letter and starter piece of jute tinder. Really cute touch; and who doesn't want to make a fire right away?

The packet opens up to form a small instruction card. Good advice in a small space. They are clearly aware of some of the limitations of these 'ferrorods', but I think have solid advice on how to use them.

I immediately installed a large in a Hiker, and a small in an Executive (in honor of Chuck Yeager
).The fit is great and, as previously speculated, relies on friction to hold the ferrorod in place. This seems adequate for these two SAKs.

They also give a little advice about using a drop of superglue to make the fit better, if the rod is loose in a SAK. I don't see the need here, but perhaps if the rod becomes shorter or thinner, that may prove useful. Time will tell.
I used the Executive's ferro rod and the nail tool to throw some nice sparks! Not a lot of sparks, but good hot ones. I haven't tried to ignite my jute....yet. I think one will need to be resourceful and skilled to use this to make a fire, but at the moment I'm confident I could get a fire started using these. I'll do a bit of experimenting and report back.
Hey, did I mention the Firefly tips really do glow in the dark?

-
So, I thought I'd test one of my new FireFly ferro-sticks.
I cheated a bit in setting up my fire: jute twine (supplied), dry paper with a few drops of veggie oil, and some fat wood (resinous pine). I did this primarily so the flames would last long enough to snap a photo (I have no intention of building a big fire.). So here's my set up:

I initially thought I'd fluff up the jute, and then hold it and the FireFly together while throwing a spark (not much different from using flint and steel.). Much to my surprise this didn't work very well, even though I was getting some great sparks from the FireFly!
So I put the jute bundle down by the paper and proceed to strike the FireFly......¡SNAP!
I broke the FireFly.


The instructions warn you to support the Firefly, which I had done initially, but when I switched technique, I forgot and applied too much pressure to the flat and it broke clean in two. I'm putting this down to user error.
However, with the broken tip, I was still able to throw some good sparks, light the jute, and make a fire:

Lesson learned (I hope).
Overall, I think this is a good product for a situation of 'last resort'. It needs to be used with care. But it will work. I'm still happy with these.
-
Not bad at all.
Heck if in the process you happen to break the ferro rod and still get a fire I'd certainly call that a win. -
I gotta agree with you guys. I'm calling it a win. It's a cold and rainy day. I was in a dry spot and the jute was dry, but not the easiest day to light a fire. I'd say that in a pinch the FireFly is way better than two sticks under these conditions. :D
-
These ferro rods are really neat. Love the GITD tips. Such fun little addition to any SAK. Great job to the designers.

-
Ok, they're here.
Wanted to do both the FF and TP in Huntsman plus back scale, but the one I got, the channel was too small for the TP?
-
-
Ok, they're here.
Wanted to do both the FF and TP in Huntsman plus back scale, but the one I got, the channel was too small for the TP?
Any work around?
oh I dont know A007, I guess that thin plus slot is for the little pen and I don't feel like cutting and modding. Maybe I'll hide a TP or that tinder piece under the saw....

-
Ah yes pen slot.
-
Pen slot in "Plus" scales is slightly curved, following the curvature of the scales edge. This flexes the pen slightly for interference fit and retention. The SwissCard does the same thing with its pen slot that's nearly identical in curvature (if you have one, hold it up to a bright light). A ferro rod is brittle and has no appreciable flex. I don't believe the Plus scales pen slot would work with one because of that curvature.
John
-
@jalind said:
Pen slot in "Plus" scales is slightly curved, following the curvature of the scales edge. This flexes the pen slightly for interference fit and retention. The SwissCard does the same thing with its pen slot that's nearly identical in curvature (if you have one, hold it up to a bright light). A ferro rod is brittle and has no appreciable flex. I don't believe the Plus scales pen slot would work with one because of that curvature.John
Correct John, the TP would not bend but is also too wide. Meh.....

-
... and you SAKsperts can please advise me, which blades besides the saw blade back have the edge to make sparks?
Not having much luck with my collection....
-
Small blade
. Yeah yeah, this may not be popular but seeing how this ferro rod would be last ditch.....Can opener may work as well. Certainly would ease the excitement over using the small blade ;). The backside awl should also work. Pretty much whatever has a sharp edge in my experience works well. I love the saw blades spine tho. Works really really well.
-
@Aloha007 said:
Small blade
. Yeah yeah, this may not be popular but seeing how this ferro rod would be last ditch.....Can opener may work as well. Certainly would ease the excitement over using the small blade ;). The backside awl should also work. Pretty much whatever has a sharp edge in my experience works well. I love the saw blades spine tho. Works really really well.
Ah ha! Awl backside, let's try...........
-
@Aloha007 said:
Small blade
. Yeah yeah, this may not be popular but seeing how this ferro rod would be last ditch.....Can opener may work as well. Certainly would ease the excitement over using the small blade ;). The backside awl should also work. Pretty much whatever has a sharp edge in my experience works well. I love the saw blades spine tho. Works really really well.
What about the scissors? They have an edge and don't do anything the small blade can't do. Save your more useful small blade/awl edges and sacrifice the redundant edge to the cause?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
