maintaining the SURGE
-
Is the whole rust issue really that bad? And how do I polish the outsides? I like to keep in the best shape possible!
-
@rockyman500 said:
Is the whole rust issue really that bad?No. It's greatly exaggerated.
If you use it in a damp environment, just wipe it down when you've finished and you'll be fine

-
My Kick & PST (each of which have been carried and used in anger) have both survived frequent salt water swims, as well as being dropped in grit and silt, among other things - with a quick fresh water rinse once in a while they are doing fine. (The PST picked up a little rust a while back, but was easy enough to clean off)
I understand the Surge is more technical, and has more nooks/moving parts, so more care might be necessary.
-
I really just lube mine and thow them back int he sheath. I actually do very little to maintain them and usually find gunk in all the nooks and crannies.
-
I have been carrying the SURGE for a long time... I'd advise you to only use Tuf-Glide or graphic lube.. The SURGE already comes pretty well broken in (you can easily one hand open the pliers) and with more lubricant I find it loosens up faster.. But yeah, what your doing is good.. The Rem Oil is going to attract dirt and grime though.. :-\
-
@Leatherman123 said:
I have been carrying the SURGE for a long time... I'd advise you to only use Tuf-Glide or graphic lube.. The SURGE already comes pretty well broken in (you can easily one hand open the pliers) and with more lubricant I find it loosens up faster.. But yeah, what your doing is good.. The Rem Oil is going to attract dirt and grime though.. :-\Well, I do wipe of the excess from all "nooks." SO, it shouldn't happen.
-
The guy gave you good advice about the Rem Oil. You are doing a good job. Those of us that take care of our tools get to enjoy them longer that's for sure. Pride of ownership is important too. Keeping the tool looking good and sharp will make you proud to own it even several years after the purchase!

-
I target shoot a lot and make my own bore cleaner/CLP called Ed's Red. I also use it to lube and protect my knifes and tools. One part ATF, one part paint thinner, one part kerosene and 3/4 pound lanolin. Good stuff you can handle blued metal after oiling and you will not get rusty finger prints. Here is a link to gun oil tests you might be surprised how your oil fair ed. But keep in mind that the tests were done under extreme conditions. Lets face it most us are not going to wipe down our tools with water and put them in a damp place to how long it takes them to rust. http://www.brownells.com/aspx/NS/GunTech/NewsletterArchive.aspx?p=0&t=1&i=503
Mike
-
@sjdep97 said:
The guy gave you good advice about the Rem Oil. You are doing a good job. Those of us that take care of our tools get to enjoy them longer that's for sure. Pride of ownership is important too. Keeping the tool looking good and sharp will make you proud to own it even several years after the purchase!
thanks.
when he went to grab it, he accidentally grabbed another one and he LUNGED for it so it didnt fall. Then he said, "Not bad for a seventy year old!"
-
Wow you do way more than I do when it comes to maintaining your tools. The most I do is give them a rinse in hot soapy water then a quick dry under the hand dryer at work.
Just remember not to feed you SURGE!!! after midnight or this is what you'll end up with. :D

-
Anoint it with oil every day
keep the Rust Monster away.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login