Handyman Challenge
-
Day 16
Didn't bother to take any pictures, but I cut down some boxes.
During lunch I peeled my apple.
It seems the large blade get's most of the use. -
#17 Some light cutting at work, changed a couple of firewarning stickers in the enginebay on a bus

Sent fra min FRD-L09 via Tapatalk
-
Day 16
Wow, we passed half of the challenge!
To be honest it does not really feel like a challenge since I EDC a Handyman of over 20 years now.
So far it does show that I might be a bit over-prepared with a Handyman. The large blade sees most of the use.But for today, it almost went by without using the Handyman apart from making lunch.
The large blade is sufficient enough for cutting hard crusted buns. But the half serrated 111mm excels in this.
Perhaps it's time for a Handyman mod? Handyman serrated? Maybe in the future.
Handyman and KaiserbrötchenI nearly put the SAK down for the rest of the day when my parents dropped by with the mail.
I had some packages coming in and boy, it was a great haul! And all three at the same time!The Handyman performed duty-fully removing the paper, tape and what not.
Again only the large blade was used.
Handyman on mail dutyI got a case for my portable espresso machine, a bunch of seeds (Yuzu) and the son of Zeus arrived: a Hercules with leather case.
-
@Mactire404 said:
Day 16
Wow, we passed half of the challenge!
To be honest it does not really feel like a challenge since I EDC a Handyman of over 20 years now.
So far it does show that I might be a bit over-prepared with a Handyman. The large blade sees most of the use.But for today, it almost went by without using the Handyman apart from making lunch.
The large blade is sufficient enough for cutting hard crusted buns. But the half serrated 111mm excels in this.
Perhaps it's time for a Handyman mod? Handyman serrated? Maybe in the future.
Handyman and KaiserbrötchenI nearly put the SAK down for the rest of the day when my parents dropped by with the mail.
I had some packages coming in and boy, it was a great haul! And all three at the same time!The Handyman performed duty-fully removing the paper, tape and what not.
Again only the large blade was used.
Handyman on mail dutyI got a case for my portable espresso machine, a bunch of seeds (Yuzu) and the son of Zeus arrived: a Hercules with leather case.
Cool! I've been curious about the hercules myself [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
@RF52 said:
Cool! I've been curious about the hercules myself [emoji106]Well, I've been opting for a WorkChamp and from the photo I initially thought I had bought a WorkChamp.
When I realized I didn't see a file in the add I checked again. It turned out to be a Hercules.
I still bought it anyway.
From reviews I expected an insanely large SAK. And it does not really feel that way, perhaps because I'm used to carrying a Handyman all day long.
It's an interesting knife. If I were to buy new I would buy a WorkChamp.
(And given my initial impression of the Hercules I think that I am going to buy the WorkChamp new)If I can find the slide-lock camo scales I'm going to team the Hecules with the Maglite Mini with camo print I got recently.
-
Cool! I've been curious about the hercules myself [emoji106]
Well, I've been opting for a WorkChamp and from the photo I initially thought I had bought a WorkChamp.
When I realized I didn't see a file in the add I checked again. It turned out to be a Hercules.
I still bought it anyway.
From reviews I expected an insanely large SAK. And it does not really feel that way, perhaps because I'm used to carrying a Handyman all day long.
It's an interesting knife. If I were to buy new I would buy a WorkChamp.
(And given my initial impression of the Hercules I think that I am going to buy the WorkChamp new)If I can find the slide-lock camo scales I'm going to team the Hecules with the Maglite Mini with camo print I got recently.
That would be a nice combo [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
#18 Same job different day. Did change some stickers on a fire supression system again, and tried to cut a hose but realized it was a steel reinforced hose so had to sharpen the Handyman when I got home. Never gonna try cutting one of those again!


Sent fra min FRD-L09 via Tapatalk
-
@RF52 said:
...and tried to cut a hose but realized it was a steel reinforced hose so had to sharpen the Handyman when I got home. Never gonna try cutting one of those again!:ahhh
Day 17
Nothing much. I cut an apple.
Handyman and appleDay 18
The day flew by without much usage.
On the way home I decided to take scenic picture of Rotterdam. I forgot the sun was on the same side at this time and had to take a lucky shot.
So why do I include such a bad shot? Well, I walked 6 flights of stairs up and down to take this image!
Blurred Handyman view of RotterdamBack home I prepared some flowers with the small blade. I know the large blade is out, but it turned out I needed a sharper edge to cut the stems.

Handyman and tulipsI took some time to give the Hercules a proper cleaning. The slidelock failed to engage at one point and I could not get all the gunk out even after a couple of cycles through the ultrasone. I ended up using heavy degreaser, but to no avail.
Then I used the canopener of my Handyman to remove the scales. This Hercules was gummed up with thick oil and grease. sand and tiny particles got stuck in it and got stuck in the slide-lock slot. With the scales removed it was much easier to clean.
I also noticed some minor play in the liners. Just enough to make the tool movement feel a little bit off. A few taps with the hammer sorted that out. With the scales re-attached it feels solid again and the slide-lock is super smooth.With the scales removed, and the mechanism visible I have some thoughts about the slide-lock. On the one hand it's a very simple mechanism. It's very easy to use. But the mechanism is hard to clean, especially grit and small particles can jam the slide-lock. I do not know if this is a common problem. This Hercules is my first slide-lock. I'm tempted to remove the slide-lock and replace the scales. However, should this blade fold over in use and close on the fingers... that'd be a bad experience. So I'll probably leave the slide-lock.
Second I'm tempted to make a small notch in the scales to store a pin. It's a minor modification and having a pin on hand is handy-dandy.
At home I cut up some flowers to put them in a vase. -
I have heard bad stuff about gunk in the slide lock mechanism before, but I don't remember any details. I suspect it is not uncommon.
-
#19 Used the can opener as a philips screwdriver, the large blade for various cutting tasks and the bottle opener saw some use [emoji106]

Sent fra min FRD-L09 via Tapatalk
-
@RF52 said:
#18 Same job different day. Did change some stickers on a fire supression system again, and tried to cut a hose but realized it was a steel reinforced hose so had to sharpen the Handyman when I got home. Never gonna try cutting one of those again!Sent fra min FRD-L09 via Tapatalk
I've had my share of metal wired hoses, steel reinforced tubing and banded/embedded wrapping, to my blades' discontent

These smurf attack when you least expect it! :ahhh -
#18 Same job different day. Did change some stickers on a fire supression system again, and tried to cut a hose but realized it was a steel reinforced hose so had to sharpen the Handyman when I got home. Never gonna try cutting one of those again!
Sent fra min FRD-L09 via Tapatalk
I've had my share of metal wired hoses, steel reinforced tubing and banded/embedded wrapping, to my blades' discontent

These smurf attack when you least expect it! :ahhhYes, it was not fun to see the knife edge roll over like that [emoji37]
Sent fra min FRD-L09 via Tapatalk
-
#20 The scissors saw the most use today, also used the knife to open som boxes and other minor cutting tasks.



Sent fra min FRD-L09 via Tapatalk
-
#21 Used the awl/reamer to make a new hole in my belt, worked like a charm [emoji106]
The saw was needed to cut a branch for a decorative ladder my wife wants.

Sent fra min FRD-L09 via Tapatalk
-
#22 Used the saw to get another stick for the decorative ladder project, and the scissors to open a bag of dog food. No pics of use so here is one with the dog from this morning.

Sent fra min FRD-L09 via Tapatalk
-
day 19
Final day of the week... for me. I can't help myself from wishing everybody a good weekend at the end of this hellish day.
During the day the Handyman did not see any use. I did get to use the light I have attached at the lanyard because the lights in the toilet at work switch off after 5 minutes.
I think it's a passive aggressive way to tell your employees to get back to work. So I passive aggressively carry a flashlight.At home the Handyman helped me cooking. Nothing very special, just cleaning out the cabinets. It's the end of the salary and there is still a bit of month left. So, we're making the best of what we have.
day 20
Aww yiss, the start of a long weekend. We have a weekend of gardening planned. I wanted to start composting, so naturally we didn't do much in the garden and drove half the country and back to get composting bins. For free of course.day 21
No gardening without gardening tools. I went to the thriftshop to buy the necessities. I used the large blade to clean up the tools. Gardena tools have annoying little plastic nubs on the end where the display packaging was attached. The large blade cut them smooth.
I was tempted to use the metal file to sharpen a hoe, but on second thought left that task to a big metal file.We had friends over and I used the Handyman to make drinks. Sparkling water with cucumber, lime, mint and ice. Alternatively I made them with tonic.
The small blade was excellent to cut off the rind of the lime.
Handyman on cocktail dutyday 22
Finally did some gardening. I used the large blade to cut some branches, the saw to cut some sticks. When switching to the big tools I made the mistake to keep the Handyman in my pocket. The result was a very sandy Handyman.
This has me wondering how the Victorinox garden knives hold up. I really want one, but doesn't dirt ruin the hinges? -
#23 The knife and scissors saw some use today cutting various things and opening a couple of boxes with new brake discs. The Handyman on the brake disc for size.



Sent fra min FRD-L09 via Tapatalk
-
#24 Used the knife and scissors as usual on the usual job I will probably be doing for a while still (86 buses left). Also used the file to file down some rough edges on a cut down wrench.



Sent fra min FRD-L09 via Tapatalk
-
Day 23
I was at home today, so I had plenty of time to take pictures of the more mundane tasks I speak of a lot, opening packages and such.
In Holland we have a type of cake calle Bokkenpoot. Usually these are small (about the width of this one), but this one s huge.
My parents had a laugh about it and gave it to me. I had a laugh and it was tasty too!
Handyman and bokkenpootYou can't live on Bokkenpoot alone, so I had noodles for breakfast.

Handyman noodlesTo make up for the bad start of the day I had some fruit during the afternoon.

Handyman and appleAnd just when I thought that was it for the day, I found a gardenhose-roll-up-thingy in the garbage. It looked worse than it is. I disassembled it, brushed it down and replaced the cut-off hose with my gardenhose. I had to use a regular screwdriver for the screws because the Handyman could not reach them.
But cutting the hose and removing the clip was a breeze.
Handyman hose repair -
Great work and the cake looked nice [emoji106]
Sent fra min FRD-L09 via Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login