What's the worst?
-
Yeah, but, has Bear Grylls used his multi-tool in a survival situation?
No, because he is still alive? :D

-
I guess that could be an interesting topic as well- Bear Grylls versus Les Stroud...
On the one hand we have a sensationalist with good tools that he rarely uses, and on the other hand we have a proper survivalist that rents his name up to whomever comes to his door with a spare dollar or two.

This causes a lot of strife in our house because Megan is a huge fan of Les Stroud and I lost an awful lot of respect for him after seeing his Camillus branded tools. I mean, it's not like they are good designs that are manufactured like crap (Taylor Cutlery, I'm looking at you....
) it's that absolutely every part of them is utter smurf. Yeah, all the stuff that comes with them is handy for survival, but I can't help but think that if you are in a store and planning for a survival situation then you'd be better off buying a PLB, satellite phone and some water purification tablets instead of a knife with a length of paracord tied to the sheath.Def
-
Yeah, but, has Bear Grylls used his multi-tool in a survival situation?
No, because he is still alive? :D
So is Les, and he has used his multi-tool for survival.

-
@Grant Lamontagne said:
I guess that could be an interesting topic as well- Bear Grylls versus Les Stroud...That was my very first thought. You comparing the Engage with...

probably the BG-branded Suspension?
-
@Grant Lamontagne said:
I guess that could be an interesting topic as well- Bear Grylls versus Les Stroud...
That was my very first thought. You comparing the Engage with...

probably the BG-branded Suspension?
Actually, it's funny you should mention that- I received my first ever Bear Grylls branded multitool yesterday, and guess what? It's a Suspension.
I'll admit they Bear Grylls line is somewhat over the top- it's hard to argue with the cheese grater for example, but at least there are good things in the line up as well. I have owned several Bear Grylls Gerber knives and handled even more and they were all quite good. I have handled a few of the Les Stroud knives, and they were all absolute crap. Poor design and even worse execution- I don't care how many dump trucks full of money they park out front of my house, I wouldn't put my name on that crap, and I at least have the decency to admit that I am a whore, and my "brand" isn't nearly as valuable as Les' was.
As for the Suspension, yes, it is a terrible tool, but it is actually not as bad as it was. After many quality problems, the Suspension at least seems to have stabilized into being a functional tool that doesn't break the first time you use it. Gerber actually suffered that problem with a lot of their imported "big box store" tools in that timeframe- for example, for an anniversary celebration years ago Gerber had sent us a bunch of things, including a bunch of Crucials, and one was broken while still in the package.

I'll never say the Suspension is a good tool, but I will say that if we are being honest, it's not as bad now as it was initially.
Def
-
Isn't that a fast food joint in North Dakota?
I think they have buffalo wings too, whatever that is.
-
Notice even Les isn't carrying one of his own monstrosities....
And given that both his sweater and vest (and more importantly, the Columbia logos on both) are clearly visible I have to wonder if that's yet another endorsement photo. I hope Columbia did a better job than Camillus did....

Def
-
I still prefer him over Bear. In every show I've seen, Bear's "advice"/example is always worse...
:o :o
-
I'm not arguing about their skills.... I am just talking about the products that have their names on them.
Def
-
There are only a few brands I would endorse. Assuming I'm not starving and desperate for money of course
Victorinox
Leatherman
Granfors bruks axes
Fallkniven fixed blades
Condor machetes
Bic lighters
Zebralight -
I have my own list as well, although mine is a lot longer, with a lot of degrees, as in, I would endorse this company for this much $$, this company for $$$, this company for $$$$$$$ and so on.
I'm not against selling out, I am against selling out cheaply. :P
Def
-
Hmm Schrade tough tool. hopefully they will warranty repair mine, who knows.
Leatherman leap,, needs metal handles? every blade/tool is too short
swisstech..... -
I would say the worst for me is the SOG Reactor.. Blade feels like its going to snap on first use.. Pliers points in the weirdest angle.. The material used feels more plastic than my son's toys...

-
@Sam Lim said:
I would say the worst for me is the SOG Reactor.. Blade feels like its going to snap on first use.. Pliers points in the weirdest angle.. The material used feels more plastic than my son's toys...
I actually really like the Reactor. Yeah, there are a few quality issues, but I like that it is compact and reasonably useful.
Def
-
@Grant Lamontagne said:
@Sam Lim said:
I would say the worst for me is the SOG Reactor.. Blade feels like its going to snap on first use.. Pliers points in the weirdest angle.. The material used feels more plastic than my son's toys...

I actually really like the Reactor. Yeah, there are a few quality issues, but I like that it is compact and reasonably useful.
Def
Isn't the PowerPint about the same size? But with more tools.
That could also be a race. New Suspension vs PowerPint. Or PowerPint vs Truss, if the prices are closer. -
@Grant Lamontagne said:
@Sam Lim said:
I would say the worst for me is the SOG Reactor.. Blade feels like its going to snap on first use.. Pliers points in the weirdest angle.. The material used feels more plastic than my son's toys...

I actually really like the Reactor. Yeah, there are a few quality issues, but I like that it is compact and reasonably useful.
Def
Isn't the PowerPint about the same size? But with more tools.
That could also be a race. New Suspension vs PowerPint. Or PowerPint vs Truss, if the prices are closer.I am really looking forward to the release of the powerpint. It looks really compact with tools that are useful to me. I really wanted something smallish like the juice series for edc but with somewhat more useful tools.
Grant?
btw how's the de-assisting of the reactor getting along? -
There is a serious road block to that.
I forgot where I put the Reactor.

It will turn up sooner or later, although it does seem to be more a case of later rather than sooner.
Def
-

The Gerber Center-Drive.
It's a shame Leatherman did not take advantage of Gerber's trash talking.
Leatherman could just compare the Center-Drive to the Surge. The Surge is the competition, not whichever tool suits Gerber's weak arguments.-Wire cutters: Cut a nail with the Center-Drive. Cut a screw. Cut coat hanger wire. Oh, you broke the wire-cutters? Sorry.

At least they're rotatable, so you can break all three sides.

On the Surge, you have 154CM wire-cutters, and stranded wire-cutters at the base of the plier head. I bet they'll last longer than the brittle carbide cutters of the Center-Drive.
"It was not designed for that." What does this mean? Was it designed to be weak? Gerber advertised it, quite aggressively mind you, as a heavy duty tool. My Surge can cut nails. My Rebar can cut nails and it's almost half the size of this. Hell, the Wave can cut nails. Not massive ones, but it can. Anything that could potentially ding your wire-cutters on the Wave, will definitely crack your Center-Drive wire-cutters. They are brittle, and any full-sized Leatherman wire-cutter set-up, be it replaceable or not, will outlast the Center-Drive's.


-Pliers: Not quite needlenose, for precision, nor blunt for endurance. Not a bad design, although it won't win any beauty contests. Worryingly, I have never seen this amount of flex in any multi-tool, not even among the dozen or so off-brand multi-tools I own.

-Main blade: Same cutting edge length on both. Not 30% longer than the competition after all. Even the SuperTool 300 has the same length blade.

-Serrated blade: One-handed, longer, and sharpened on the Surge. On the Center-Drive it takes multiple steps to deploy, it is shorter, and faces inwards, and comes unsharpened. Not a single review I saw had a properly sharpened serrated blade. No wonder it was not compared to the competition.


-Scissors: Big strong scissors on the Surge, and outside-accessible.

No scissors on the Center-Drive. That's odd. Fiskars owns Gerber. Why not toss the serrated blade and put scissors in its place? You've got a big blade that's one-handed anyway.

-Saw: No saw on the Center-Drive. No saw on the Surge, if you have the file in there, but you can put other t-shank saws in there, woodsaws, metal saws, different lengths.
Gerber has a RemGrit saw holder on some of their multi-tools. That would have been a nice addition to the Center-Drive. It would really suit it, as a high-end Gerber multi-tool. It also accepts other blades so you could carry the one you needed.


-Pry-bar: The Center-Drive has an angled nail-puller. The Surge has a large flathead. It is interesting to note that Leatherman calls this tool a large screwdriver. Many people will mention that you can also pry with it. And many people do. So why does Leatherman not call it a prying tool as well as a screwdriver? Notice that there is no feature on it to warrant the pry-bar moniker. No nail-pulling notch, no angle to it, no edge bevel, no L cross-section, all features present on the Center-Drive's implement.
The reason is that pry-bars on multi-tools never stack up to the real thing, like a multi-tool blade does with a folding knife, or a multi-tool screwdriver does with a dedicated screwdriver. A pry-bar is a wonderful thing, and the hundreds of chipped flatheads, broken blade tips, and halved files on multi-tools illustrate the point quite convincingly. Of course, an appropriately sized flathead could be used to pry, as long as the task is within reason.
The geometry of a multi-tool pry-bar is wrong. For screwdrivers, chisels, and awls, and blades sometimes, the force is applied to the tip, along the axis of the implement. For woodsaws, metal saws, can/bottle openers, and blades, you apply force against the edge, opposite of the pivoting orientation. No problem there. For a pry-bar, the force is applied to the sides, perpendicularly to how the implement pivots. This puts a tremendous amount of force to the weak-point, the holed section of the implement that the screw goes through.Granted, some tools have addressed this issue. You can make the implement thick, like the overbuilt bottle-opener of the Victorinox Spirit. Still, while the thickness of the part helps, the broadness is also limited by design. A pivoting pry-bar will always be weak at the pivot point. An easier solution would be a separate tool, like the removable one-piece pry-bar of the Emerson Multitasker. Both decent solutions to the problem. Ideally, one could carry an inexpensive, dedicated pry-bar. It will cost little, and you can promptly replace if it fails, thus eliminating the frustration of having to send the entire multi-tool back to the manufacturer for warranty, provided they agree to replace a broken blade/flathead you broke by prying with it in the first place.
Looking at the Center-Drive and Surge offerings, I doubt you can do something with one that you could not do with the other. The Center-Drive's implement is short, arguably soft for the job, and the angle is not obtuse enough to provide leverage much greater than the Surge. For easy tasks both are equal. For demanding tasks, both implements are inherently weak and uncomfortable.

-Reamer: On the Surge, yes. That's a properly shaped reamer. The Center-Drive has a wide pointy thing.
-File: No metal-saw teeth on the Center-Drive, and it takes more steps to open it. The Surge file is diamond-coated, and removable. Not only can you use it to sharpen your Surge's blade, you can replace it with another one, or a nice Bosch saw.
-Locking tab is plastic on the Center-Drive. No plastic on the Surge.
-Bit-driver: Center-Drive has longer reach, and takes standard bits. I will agree on an advantage for Gerber here, but a marginal one.
Before Gerber made such a big deal out of it, it was never an issue to have a multi-tool screwdriver inline with the center axis of the tool. All other Gerber multi-tools have off-center screwdrivers. The awkwardness of off-center screwdrivers came from the bulkiness of the multi-tool they are attached to, not the screwdrivers themselves. And the Center-Drive is bulky. Butterfly multi-tools offer more positions by design. You can open one handle of the Surge for reach, or have it in a pistol grip configuration, which is what many people do. Also, the bit holder is only good if you carry bits. If we are talking sets and sheath-carry, then you have many more bits with the Surge bit kit, plus a woodsaw. You could also have the bit extender with the Surge and carry standard 1/4" bits, but let's give this round to the Center-Drive.-Weight: 9.5oz for the Center-Drive, 12.5oz for the Surge. Three ounces more, for a big pair of scissors, longer one-handed serrated blade, longer reamer, two fixed flatheads, and metal locks. Quite a lot of additional weight, for quite a few features. It is interesting to note that the Surge is more compact, and there is a pocket clip you can add to it. Some users carry it like that. I have yet to see someone carry the Center-Drive in a pocket, despite it being lighter.
Conclusion
Gerber fixed the match to make the Center-Drive appear better than it is, cherry-picking functions and the tools they were compared to. That seems desperate to me. Gerber did not have to resort to such embarrassing promotional tactics. They are a big player in the multi-tool world. Their tools have been around for many years, and have lots of dedicated users. They had so little confidence in their new design proving itself, they abandoned real arguments in favour of juvenile insults towards their competitor. I guess it worked, seeing how many people have bought one and posted on YouTube about it. Did the Leatherman Surge users stop carrying their Surge? No. Why would they? Publicity was nice, but if you can see past the hype and the questionable glowing reviews, there is more to it. The Center-Drive is certainly nice, and a step in the right direction, but not without its flaws and limitations. A lot of people who bought the Center-Drive have returned it, either because of glaring quality control issues, bulkiness, or failure to perform to their standards.The critical reviews could provide enough information on what works and what does not on the Center-Drive. Gerber may take the negative points people have raised, and turn the Center-Drive into a real winner. Scissors, woodsaw, RemGrit/jigsaw saw holder, proper reamer, double-sided bits, upgraded wire-cutters or their standard MP600 plierhead, higher end blade steel, all-metal locking tab. Maybe also have the bit set on the side of the sheath, so it protrudes less.
Until then, it is what it is. Gerber's flagship model. Praised by users. True innovation.
A Gerber multi-tool, with one-handed pliers that are not the strongest in their range. A bit driver that sits center-axis to a massive awkward handle. A main blade that is the exact same length of its competitors. And wire-cutters that are arguably the worst in the industry.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




