Handyman Challenge
-
Day 23
I was at home today, so I had plenty of time to take pictures of the more mundane tasks I speak of a lot, opening packages and such.
In Holland we have a type of cake calle Bokkenpoot. Usually these are small (about the width of this one), but this one s huge.
My parents had a laugh about it and gave it to me. I had a laugh and it was tasty too!
Handyman and bokkenpootYou can't live on Bokkenpoot alone, so I had noodles for breakfast.

Handyman noodlesTo make up for the bad start of the day I had some fruit during the afternoon.

Handyman and appleAnd just when I thought that was it for the day, I found a gardenhose-roll-up-thingy in the garbage. It looked worse than it is. I disassembled it, brushed it down and replaced the cut-off hose with my gardenhose. I had to use a regular screwdriver for the screws because the Handyman could not reach them.
But cutting the hose and removing the clip was a breeze.
Handyman hose repair -
Great work and the cake looked nice [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
that cake looks very nice!
In Spain we have a similar one called "Brazo de Gitano" (Gypsy's Arm
) with almost the same shape, ingredients and construcitonThere's also the British "Roly-Poly", the Argentinian "Pionono" and variations of the same theme

-
@ThePeacent said:
that cake looks very nice!
In Spain we have a similar one called "Brazo de Gitano" (Gypsy's Arm
) with almost the same shape, ingredients and construciton
There's also the British "Roly-Poly", the Argentinian "Pionono" and variations of the same theme
I searched for an english name, but couldn't find anything. Should have looked harder I guess. Bokkenpoot translates roughly like goatsfoot.
Day 24
One of the tasks I've been putting off: cutting out the letters for a letterboard.
But I'm glad they are all cut out and sorted.
Now to think of something catchy to put on the board.
I don't think 'Till rust do us part' will do it for my girlfriend. ^_^
Handyman alphabetI really want a Yuzu tree in my garden. So I made it a project. I ordered Yuzu seeds and put them in a zip-lock bag with a wet tissue to gerimate. Now, 8 days later little green buds are starting to pop out of the seeds and it's time to put them in the soil. To bad I'm all out of planting cups.
Luckily all you need is a paper, a Victorinox and some origami skills to fold some planting cups.
The bottle opener is great at opening staples and the large blade is excellent at cutting.
Handyman paperworks
I already made four when my girlfriend showed me we did have some palnting cups left.
At the end of the day I had a cup of coffee in the garden while reading a book.

Handyman, coffee and a book -
#25 The usual cutting tasks today, and cutting some zip ties for a air pump for my MTB shocks [emoji106]



Sent fra min FRD-L09 via Tapatalk
-
you two in this challenge are handymen yourselves

love to see all these uses
-
@ThePeacent said:
you two in this challenge are handymen yourselves
love to see all these uses
Thanks!
Sent fra min FRD-L09 via Tapatalk
-
#26 Used the scissors and bottle opener today, and a bonus pic of the Handyman and chewie AKA Fenris [emoji106] Only 4 days left but I think the Handyman will stay in my pocket for a while after the challenge is done [emoji16]



Sent fra min FRD-L09 via Tapatalk
-
@RF52 said:
#26 Used the scissors and bottle opener today, and a bonus pic of the Handyman and chewie AKA Fenris [emoji106] Only 4 days left but I think the Handyman will stay in my pocket for a while after the challenge is done [emoji16][Sent fra min FRD-L09 via Tapatalk
keep an eye so that chewie doesn't get too attached to it and decides to give the Handyman a bite :D
-
#26 Used the scissors and bottle opener today, and a bonus pic of the Handyman and chewie AKA Fenris [emoji106] Only 4 days left but I think the Handyman will stay in my pocket for a while after the challenge is done [emoji16][
Sent fra min FRD-L09 via Tapatalk
keep an eye so that chewie doesn't get too attached to it and decides to give the Handyman a bite :D
As long as he has a stick he's happy [emoji16]
Sent fra min FRD-L09 via Tapatalk
-
#27 The usual cutting tasks with knife and scissors. Also used the bottle opener to open a couple of bottles [emoji106]




Sent fra min FRD-L09 via Tapatalk
-
#28 Used the knife to open my new Olight S10 [emoji106]

Sent fra min FRD-L09 via Tapatalk
-
Great challenge guys

It’s been fun following this challenge
Shame it’s nearly finished
Well done everyone so far

-
Day 25
All the sand in my pocket has gotten to my Handyman and it was getting a bit gritty. Originally I intended to give it a full treatment at the end of the challenge, but I had to do it earlier.
Handyman oilingDay 26
I used to hook to open a can of beans, but the tab pulled off.
The Handyman keeping tabs on the beansLuckily the can opener works very well.

The Handyman can open a canDay 27
Did some work on the ceiling lights. They were hanging on the excess wire since we moved in. I shortened them and put the ceiling caps in place.
I was always worried to cut in copper and dulling my blade. But over the years I fine-tuned my cable-stripping techniques.
First I use the small blade to cut around the outer sheath.Then banding it and just touching it with the blade to cut just deep enough to see the inner wires.
I separate the inner wires and cut them twice with the scissors. Just deep enough and 90' around, so you get 4 perforations in the coloured sheath.
Then I open the bottle-opener and put bend the wire over the notch, hold it with my thumb and pull the excess sheath off. Done!
Handyman on electrician dutyJust bear in mind SAKs are not insulated and make damn sure the power is off!.
Day 28
More work done. I had to shorten a pole to make it fit between a door with the new end-caps installed. The Vic saw is excellent.
Handyman woodsawI did some late-night tinkering in my shed. I wonder what I cooked up...

Handyman tinkeringWell, to be hones I didn't use just the Handyman. I ended up using a full-sized saw to cut the plywood. But I did use the Handyman to screw, drill pilot holes and screw in the hooks (with the hook) in my new SAK display.

New SAK displayEven though I couldn't upload every night I have great fun with this challenge. As mentioned it's a shame the challenge is nearly over, but I can assure you that the Handyman will remain by my side every day.
-
That piping around the frame makes it extra “gadgety”.

-
@Mactire404 said:
Day 25
All the sand in my pocket has gotten to my Handyman and it was getting a bit gritty. Originally I intended to give it a full treatment at the end of the challenge, but I had to do it earlier.Day 28
More work done. I had to shorten a pole to make it fit between a door with the new end-caps installed. The Vic saw is excellent.[

New SAK displayEven though I couldn't upload every night I have great fun with this challenge. As mentioned it's a shame the challenge is nearly over, but I can assure you that the Handyman will remain by my side every day.
excellent uses, amazing how much you're getting out of it

That display looks awesome too!!

-
@ThePeacent said:
excellent uses, amazing how much you're getting out of it
That display looks awesome too!!

SAKs are amazing, can't imagine being without one really.
The SAK display needs a little more work. It has only one hook and I forgot that SAKs have weight. So when I take one off, or put one back on I need to readjust it.
Also, I was one hook short, so now I have to buy a whole pack just for one hook
And, my girlfriend wasn't too happy because now I have to buy more SAKs to fill out the board.
Luckily I have 4 SAKs incoming at the moment, but only one has a ring
-
Great work Mac! [emoji106]
Sent fra min FRD-L09 via Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login