Show off your Sak mod's!
-
Lovely job Samek
How do you get your pins peened so well? -
Very good Samek. Love the way you've made easy access to the can opener and the small blade.

-
That’s an awesome mod... In total, how many SAKs where sacrificed for this?
Sent from my iPhone using Tapatalk
-
That’s an awesome mod... In total, how many SAKs where sacrificed for this?
I have boxes with many parts left from other modificationsI, so I really dont know exactly.
So, let's see:- Bugnard scales
- Elinox Blades
- 08 Soldier blade and awl
- Solo spring for scissors
- Everything else could (in theory) be from one knife.

-
That’s an awesome mod... In total, how many SAKs where sacrificed for this?
I have boxes with many parts left from other modificationsI, so I really dont know exactly.
So, let's see:- Bugnard scales
- Elinox Blades
- 08 Soldier blade and awl
- Solo spring for scissors
- Everything else could (in theory) be from one knife.

Awesome

Sent from my iPhone using Tapatalk
-
Some small improvements I have done to my explorer
When I just got the explorer, it is always too slippery for my hand. So I used soldering iron to make some scare on the scales.
A pruner style blade was reshape frome the small blade.
One day I notice the philip drive on the can opener is almost the same size as the long philip driver, so I grind it down to fit a smaller philips.
I use the pin alot and always think the pin is so small and umcomfortable to hold. So I make one from those sewing kit and bend the back.




-
@xnonox said:
Some small improvements I have done to my explorerWhen I just got the explorer, it is always too slippery for my hand. So I used soldering iron to make some scare on the scales.
A pruner style blade was reshape frome the small blade.
One day I notice the philip drive on the can opener is almost the same size as the long philip driver, so I grind it down to fit a smaller philips.
I use the pin alot and always think the pin is so small and umcomfortable to hold. So I make one from those sewing kit and bend the back.
What is that grey stuff that is in the corkscrew?
Sent from my SM-G955F using Tapatalk
-
That’s an awesome mod... In total, how many SAKs where sacrificed for this?
I have boxes with many parts left from other modificationsI, so I really dont know exactly.
So, let's see:- Bugnard scales
- Elinox Blades
- 08 Soldier blade and awl
- Solo spring for scissors
- Everything else could (in theory) be from one knife.

Awesome! [emoji44][emoji7][emoji108][emoji106][emoji173]️
-
Some small improvements I have done to my explorer
When I just got the explorer, it is always too slippery for my hand. So I used soldering iron to make some scare on the scales.
A pruner style blade was reshape frome the small blade.
One day I notice the philip drive on the can opener is almost the same size as the long philip driver, so I grind it down to fit a smaller philips.
I use the pin alot and always think the pin is so small and umcomfortable to hold. So I make one from those sewing kit and bend the back.
What is that grey stuff that is in the corkscrew?
Sent from my SM-G955F using Tapatalk
That's an eyeglass screwdriver - a handy little driver for glasses

-
Hi guys!
A minor mod on my Electrician. I love having a small blade, but I miss the Phillips of the Pioneer. So I took my Dremel 3000 and turned the big flat driver into a 2d Phillips/small flat.
It works nicely. You can see the result compared to the original, and to the can opener / driver.
I'll do the same on my Rancher and Harvester.


Στάλθηκε από το HUAWEI VNS-L31 μου χρησιμοποιώντας Tapatalk
-
My bladeless B&B SAK got some new clothes

[It's not failure if you learn something from it]
-
@kottskrapa said:
My bladeless B&B SAK got some new clothes
[It's not failure if you learn something from it]
Lots of forest in Sweden.... don’t lose it. :ahhh :D
-
Did this (screws and epoxy) but it don't stick. Second try I made the glue area folder with dremmel. Still no luck. Any advice is welcome!

~ i love whittling and SAK's ~
-
@Don Pablo said:
My bladeless B&B SAK got some new clothes

[It's not failure if you learn something from it]
Lots of forest in Sweden.... don’t lose it. :ahhh :D
Im living in the middle of it. But this is for those times Im going to town to get some beers with friends and a blade are not appropriate [emoji5] but barbecue in a park might be dangerous
[It's not failure if you learn something from it]
-
Well this is awkward...
I had finally decided to buy some pivots and screws from Alpha Knife Supply, but due to the whole GDPR deal, EU residents, without a previous account in the site, are banned...[emoji36]Anyone from that side of the pond would be willing to make a purchase for me? Please contact me by PM.

Sent from my Mi A1 using Tapatalk
-
@FInixNOver said:
Well this is awkward...
I had finally decided to buy some pivots and screws from Alpha Knife Supply, but due to the whole GDPR deal, EU residents, without a previous account in the site, are banned...[emoji36]Anyone from that side of the pond would be willing to make a purchase for me? Please contact me by PM.

Sent from my Mi A1 using Tapatalk
Ended up going with the pivots and screws from KnifeKits...
I know the tolerances are not as good, but I want to upgrade my daily SAK to pivots/screws.
Now, to complete this upcoming mod, I'm searching for a magnifying glass layer, but would like to avoid having to buy an Explorer just for that.
Anyone have these parts for sale?And to finish, one question...
What's the thickness of the magnifying glass layer? The idea is to incorporate it in an Alox SAK, therefore, I need to find out which backspring I need to use to make this happen.Sent from my Mi A1 using Tapatalk
-
@FInixNOver said:
What's the thickness of the magnifying glass layer? The idea is to incorporate it in an Alox SAK, therefore, I need to find out which backspring I need to use to make this happen.It's the same thickness as a Pioneer blade layer, whatever that is.
-
What's the thickness of the magnifying glass layer? The idea is to incorporate it in an Alox SAK, therefore, I need to find out which backspring I need to use to make this happen.
It's the same thickness as a Pioneer blade layer, whatever that is.
Nice! And thanks for the answer!!
I have a spare of those.Sent from my Mi A1 using Tapatalk
-
What's the thickness of the magnifying glass layer? The idea is to incorporate it in an Alox SAK, therefore, I need to find out which backspring I need to use to make this happen.
It's the same thickness as a Pioneer blade layer, whatever that is.
So you don’t need two of those blade springs?
Today I learned.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login