Firefly Ferro rod.
-
@Aloha007 said:
Small blade
. Yeah yeah, this may not be popular but seeing how this ferro rod would be last ditch.....Can opener may work as well. Certainly would ease the excitement over using the small blade ;). The backside awl should also work. Pretty much whatever has a sharp edge in my experience works well. I love the saw blades spine tho. Works really really well.
What about the scissors? They have an edge and don't do anything the small blade can't do. Save your more useful small blade/awl edges and sacrifice the redundant edge to the cause?
-
The awl works well and it spares your blade.
-
Also if you are outdoors a small sharp rock works fine. Or broken glass. On standard fero rods anyhow I assume same for these. On a test sakbi made with fero rod I squared off the top of the can opener tool so it had a crisp corner and that scraped well.
-
Thanks for the hints!

-
I've tried:
Saw
Executive nail file
Can opener
AwlAwl seem good. Saw is easiest to use.
-
Small blade
. Yeah yeah, this may not be popular but seeing how this ferro rod would be last ditch.....Can opener may work as well. Certainly would ease the excitement over using the small blade ;). The backside awl should also work. Pretty much whatever has a sharp edge in my experience works well. I love the saw blades spine tho. Works really really well.
What about the scissors? They have an edge and don't do anything the small blade can't do. Save your more useful small blade/awl edges and sacrifice the redundant edge to the cause?
For sure. I'd use anything that worked in an emergency.

-
This just in, from my state of the art testing lab, (downstairs bathroom):
On the can opener tool, the little notch by (under) the small screwdriver works too! -
Upgraded my Victorinox Swiss Champ XLT.


-
Just popping my head in this thread to ask a question, haven't read it all so apologies if it has been asked or answered before!
Do we have any sense of how many uses one might expect out of this ferro rod? It seems very thin. Also, does it seem at all brittle and liable to snap in half after it has been used a bit and thinned out?
-
@GoatDragon said:
Just popping my head in this thread to ask a question, haven't read it all so apologies if it has been asked or answered before!Do we have any sense of how many uses one might expect out of this ferro rod? It seems very thin. Also, does it seem at all brittle and liable to snap in half after it has been used a bit and thinned out?
I dont have an answer since I don't own one but, I can imagine in an emergency, once would be very welcomed. I'd think one could get a few( 3 or so ) uses however this is more emergency type thing so again once might be its role. I'd carry a pill fob with a tinderquick or something very similar to make catching a spark a lot easier. Thats my 2c worth.
-
Just popping my head in this thread to ask a question, haven't read it all so apologies if it has been asked or answered before!
Do we have any sense of how many uses one might expect out of this ferro rod? It seems very thin. Also, does it seem at all brittle and liable to snap in half after it has been used a bit and thinned out?
I dont have an answer since I don't own one but, I can imagine in an emergency, once would be very welcomed. I'd think one could get a few( 3 or so ) uses however this is more emergency type thing so again once might be its role. I'd carry a pill fob with a tinderquick or something very similar to make catching a spark a lot easier. Thats my 2c worth.
It comes with a little strand of tinder - cute.
Yes, they say, hold it against a forefinger to strike it. Not many SAK edges are 90 degree enough IMHO, which is a bit disingenuous if you don't have the SAK they demonstrated.
It does work, as a cool addition/ gimic, I just dont think its for survival.
Ill give it a try this weekend and see whats up. So far B- -
The saw blade spine on SAKs is brilliant for striking a ferro rod.
-
The awl is exceptional on a ferro rod from my experience.
-
The ones I use in my drawer Saks are 58 cents. I bet if you glued a head on one you could fit it in the pen slot. Very similar diameter.
-
Just got mine... they fit well in the SAKs at least.
Not so in the extra scales I added to the ST300VX though - the tool slots are too narrow, seems the Fireflies are wider than the T&T by quite a margin, and I used the T&T as templates for the design of the scales. Will have to redesign them (again ::) sigh)...
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

