Handyman Challenge
-
Day 25
All the sand in my pocket has gotten to my Handyman and it was getting a bit gritty. Originally I intended to give it a full treatment at the end of the challenge, but I had to do it earlier.
Handyman oilingDay 26
I used to hook to open a can of beans, but the tab pulled off.
The Handyman keeping tabs on the beansLuckily the can opener works very well.

The Handyman can open a canDay 27
Did some work on the ceiling lights. They were hanging on the excess wire since we moved in. I shortened them and put the ceiling caps in place.
I was always worried to cut in copper and dulling my blade. But over the years I fine-tuned my cable-stripping techniques.
First I use the small blade to cut around the outer sheath.Then banding it and just touching it with the blade to cut just deep enough to see the inner wires.
I separate the inner wires and cut them twice with the scissors. Just deep enough and 90' around, so you get 4 perforations in the coloured sheath.
Then I open the bottle-opener and put bend the wire over the notch, hold it with my thumb and pull the excess sheath off. Done!
Handyman on electrician dutyJust bear in mind SAKs are not insulated and make damn sure the power is off!.
Day 28
More work done. I had to shorten a pole to make it fit between a door with the new end-caps installed. The Vic saw is excellent.
Handyman woodsawI did some late-night tinkering in my shed. I wonder what I cooked up...

Handyman tinkeringWell, to be hones I didn't use just the Handyman. I ended up using a full-sized saw to cut the plywood. But I did use the Handyman to screw, drill pilot holes and screw in the hooks (with the hook) in my new SAK display.

New SAK displayEven though I couldn't upload every night I have great fun with this challenge. As mentioned it's a shame the challenge is nearly over, but I can assure you that the Handyman will remain by my side every day.
-
That piping around the frame makes it extra “gadgety”.

-
@Mactire404 said:
Day 25
All the sand in my pocket has gotten to my Handyman and it was getting a bit gritty. Originally I intended to give it a full treatment at the end of the challenge, but I had to do it earlier.Day 28
More work done. I had to shorten a pole to make it fit between a door with the new end-caps installed. The Vic saw is excellent.[

New SAK displayEven though I couldn't upload every night I have great fun with this challenge. As mentioned it's a shame the challenge is nearly over, but I can assure you that the Handyman will remain by my side every day.
excellent uses, amazing how much you're getting out of it

That display looks awesome too!!

-
@ThePeacent said:
excellent uses, amazing how much you're getting out of it
That display looks awesome too!!

SAKs are amazing, can't imagine being without one really.
The SAK display needs a little more work. It has only one hook and I forgot that SAKs have weight. So when I take one off, or put one back on I need to readjust it.
Also, I was one hook short, so now I have to buy a whole pack just for one hook
And, my girlfriend wasn't too happy because now I have to buy more SAKs to fill out the board.
Luckily I have 4 SAKs incoming at the moment, but only one has a ring
-
Great work Mac! [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
#29 Just hanging around in the forest today with the dog. Pic didn't turn out very good[emoji58]

Sent fra min FRD-L09 via Tapatalk
-
I took some better pics but for some reason the didn't save on my phone [emoji58]
#29 Just hanging around in the forest today with the dog. Pic didn't turn out very good[emoji58]
Sent fra min FRD-L09 via Tapatalk
Pic is not that bad RF52 I have seen a lot worse

Sent fra min FRD-L09 via Tapatalk
-
@RF52 said:
I took some better pics but for some reason the didn't save on my phone [emoji58]
@Wspeed said:#29 Just hanging around in the forest today with the dog. Pic didn't turn out very good[emoji58]
Sent fra min FRD-L09 via Tapatalk
Pic is not that bad RF52 I have seen a lot worse

Sent fra min FRD-L09 via Tapatalk
That’s nasty when that happens :ahhh

-
#30 So my first 30 day challenge is over, the time went so fast. The Handyman was a nice tool to get to know this last month, even though the blades and scissors saw the most use the other tools came in handy at times too [emoji106] Overall I really like the Handyman and it will stay in my pocket still, maybe accompanied by a larger plier based MT. Nothing fancy and exciting the last day as I still have a smurfload of busses left to do a yearly check-up on the fire suppression system. Got to use the large knifeblade, the scissors and bottle opener as a screwdriver today




Sent fra min FRD-L09 via Tapatalk
-
Day 29
When you EDC a SAK a solution is just seconds away... My Nespresso machine likes to 'eat' capsules, that's when they get stuck in the machine.
Instead of pushing it through with a spoon like my mom does I let the Handyman do the work. So I don't waste the capsule.
I pop the capsule back in and get a cup of coffee! Moments later the performed for the 'Danger Club' and got covered in crema.

Handyman pliersDay 30
The final day! I'm back at work again. Which means I'm stuck in a dark room for the rest of the day. On days like these the Handyman does not see a lot of action.
At the end of the day I saw a nice photo opportunity when cooking.
Fishy Handymanconclusion
First of, I'd like to thank RF52 for participating. A challenge is fun on it's own, but it's better when you do it together. At least that's my opinion. I really enjoyed your photo's.As for the Handyman, I've been so accustomed to it that I wouldn't dare to carry something else. However, I think I could. There are quite a couple of tools that didn't see any use.
I think I could manage with just an Explorer or just a Climber. The Compact would be a pretty good candidate also.
But as I said, the Handyman won't be replaced. I'll just carry additional SAKs, just for the fun of it!
Also, there were no tools I missed. There is no light on the Handyman, and for a moment I thought about adding it in a mod.
But it would add too much bulk (would it be as thick as a SwissChamp?) and adding a small keychain light on my lanyard is more efficient as I can use the SAK and the light at the same time. -

Great challenge!

-
Good to see you finish strong [emoji16] Thank you for starting the challenge, I really enjoyed it [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
my Nespresso also does that sometimes

good on you two for finishing and providing us entertainment, excellent clever uses and good pics!!

-
Excellent challenge

Enjoyed it very much well done

-
Nice challenge!

-
Thanks guys [emoji16]
Sent fra min FRD-L09 via Tapatalk
-
I don't believe there is a badge for this challenge, nor one that applies to this in any other way.
So it's just eternal fame.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login