Rebar with scissors?
-
@kaput said:
What tool are you swapping for the scissors? I replaced the cap lifter/opener once without issue.At the moment, it looks like l can squeeze the scissors in without sacrificing anything. l basically removed the lanyard ring and a thick washer and moved the cap lifter over to the side with the awl and screwdrivers. The scissors are now on right side of the phillips. It's tigh, but seems to be OK.
If l had to loose a tool it would be the serrated blade but l understand the issues with the cutout to clear the lock hinge.
From what l can see l wont be able to get the tool to close properly unlesss l cut the scissor tab.
-
It all depends on the scissors. Some of us didn't have to do anything with the scissors to have it close properly and some did.
-
l'm aware of 4 different leatherman scissors that are fitted as inside tools; the PST ll type, the Pulse type and 2 types of Wave/Charge/Fuse etc.
As mentioned, l have two versions of the Wave etc type and they are both the same overall length.
Is there a type of scissor that l'm not aware of? -
There are different versions of the Fuse/Blast and New Wave/Charge scissors.
I don't know anyone that has used the PST II/OG Wave or Pulse scissors in this mod.
-
ReBar with scissors? :ahhh :ahhh :ahhh :ahhh

-
@george1 said:
l'm aware of 4 different leatherman scissors that are fitted as inside tools; the PST ll type, the Pulse type and 2 types of Wave/Charge/Fuse etc.
As mentioned, l have two versions of the Wave etc type and they are both the same overall length.
Is there a type of scissor that l'm not aware of?@SteveC said:
There are different versions of the Fuse/Blast and New Wave/Charge scissors.I don't know anyone that has used the PST II/OG Wave or Pulse scissors in this mod.
If that's the case I have a pair of the newer wave scissors that I have tried and have worked for this mod if you need. You can pm me if interested.
-
Hi Kaput,
Interesting, there must obviously be more versions.
l thought there was only two types of Wave scissors and l thought that l had both versions.
Both of the ones I have are about 3-4 mm too long and hit the plier spring thingy.
lf your're certain that your version fits flush below the spring, I am definitely interested and l will PM you. I would prefer to have one that is unmodified.
l'm away from work for a couple of days, but l'll measure the length of the ones l have when l get back.
Cheers
George -
Have you checked to see if they will work ? Because my scissors sit on top of the plier spring and they close fine

-
Just drill the rivet out. That piece doesn't do much...
-
Rebar with scissor how epic is that

-
Have you checked to see if they will work ? Because my scissors sit on top of the plier spring and they close fine
Yes, l have installed both types and although they "close", the handles do not touch.
Maybe l'm being too fussy!George
Try grinding a little off of the back of the scissor tab.
-
Drilling out the rivet and removing the spring plate sounds a bit too brutal for me.
l'll just try grinding the scissors tab and if that doesn't work then l'll trim it.
l just thought that l must be missing something.
Cheers
George -
@Sam Lim said:
Just drill the rivet out. That piece doesn't do much...
That piece helps to make the handles stay together.. I agree its not much but there is definitely a little difference when they are removed..
Tensioning the fasteners correctly will cover that. It's been years now and I haven't missed them. ST300 also doesn't have them...
-
@george1 said:
Drilling out the rivet and removing the spring plate sounds a bit too brutal for me.
l'll just try grinding the scissors tab and if that doesn't work then l'll trim it.
l just thought that l must be missing something.
Cheers
GeorgeWell you did ask about getting unmodified scissors in...
-
Funny, I have the same idea and currently wait for a package from Loki (Wave scissors).
My plan is to move the small flat screwdriver to the other side (remove the spacer for that).
Then the lanyard ring still is to thick, so either file it down or add a slim spacer there so the scissors fit.
I'll see how that goes :) -
Hey george1,
how did your mod go?
I've finished mine on Friday :-)
More details here...
</post/1702856>
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
