And so it begins.... (My adventures into Alox!)
-
Very nice.
-
Whoa check out the glamor photo of my donation knife!
Wow amazing photo - It's just one knife right? And he's photo shopped three images together? ???
Great to credit the photographer in the pic but they should credit the knife maker too
(I guess that is elsewhere in the article!) As the knife is just fabulous - So dramatic, good looking and appealing. The blue, 'black', 'gold', and 'silver' go so well togetherHey Syph - Can you remind us what the donation thing is please. Seem to remember it was another knife forum/''marketing' for you - Right?
@Syph007 said:
And I finally finished up my donation to the kniferights fund raiser this year. -
Thanks Zoidy - I shoulda looked harder
I looked Kniferights up - Interesting !!
Could not find Syph's knife in their fundraising page - But I did see a knife signed by Col. Oliver North - Wow
-
Hey Syph - somewhere in this thread you mentioned the thickness in the TI scales vs cellulode plus scalesis about a plier layer. Was wondering if you could compare the thickness to Alox 93mms. Is a 91mm huntsman with TI the same thickness as a PioneerX, or are the scales basically the same?
-
@tommywp said:
Hey Syph - somewhere in this thread you mentioned the thickness in the TI scales vs cellulode plus scalesis about a plier layer. Was wondering if you could compare the thickness to Alox 93mms. Is a 91mm huntsman with TI the same thickness as a PioneerX, or are the scales basically the same?My Ti scales and alox are about the same thickness. The 91 mm tool layers are thinner than the 93 mm though. Well blade and opener layers. Saw and scissors would be the same.
-
@Syph007 said:
It had to go on the front scales since the fold over inline awl would block it on the back. Works fine though.Could the inline awl be positioned on the same end as the main blade, i.e. on the front, and the drawer also be positioned on the front?) The fold-over would cover the drawer, but it would require no more than opening the awl to access the drawer?
(This could make way for a "classic" marlinspike on the back...?
) -
@Toppskarven . said:
It had to go on the front scales since the fold over inline awl would block it on the back. Works fine though.
Could the inline awl be positioned on the same end as the main blade, i.e. on the front, and the drawer also be positioned on the front?) The fold-over would cover the drawer, but it would require no more than opening the awl to access the drawer?
(This could make way for a "classic" marlinspike on the back...?
)No actually the inline awlnis too long to play nice and fit in one layer with the caplifter.
-
@Toppskarven . said:
It had to go on the front scales since the fold over inline awl would block it on the back. Works fine though.
Could the inline awl be positioned on the same end as the main blade, i.e. on the front, and the drawer also be positioned on the front?) The fold-over would cover the drawer, but it would require no more than opening the awl to access the drawer?
(This could make way for a "classic" marlinspike on the back...?
)No actually the inline awlnis too long to play nice and fit in one layer with the caplifter.
thinking of what tool that could be opposite the awl... Gutting knife from a hunter?
Nope that wont do... does electricians blade fit I wonder? 
-
@Toppskarven . said:
@Toppskarven . said:
It had to go on the front scales since the fold over inline awl would block it on the back. Works fine though.
Could the inline awl be positioned on the same end as the main blade, i.e. on the front, and the drawer also be positioned on the front?) The fold-over would cover the drawer, but it would require no more than opening the awl to access the drawer?
(This could make way for a "classic" marlinspike on the back...?
)No actually the inline awlnis too long to play nice and fit in one layer with the caplifter.
thinking of what tool that could be opposite the awl... Gutting knife from a hunter?
Nope that wont do... does electricians blade fit I wonder? 
Nail nick would be on wrong side but might fit. The awl really only fits with the blade. I once shortened an awl to fit with caplifter but it looked weird.
-
@Toppskarven . said:
@Toppskarven . said:
[quote author=Syph007 link=topic=34772.msg1666110#msg1666110 date=1522175793]
It had to go on the front scales since the fold over inline awl would block it on the back. Works fine though.
Could the inline awl be positioned on the same end as the main blade, i.e. on the front, and the drawer also be positioned on the front?) The fold-over would cover the drawer, but it would require no more than opening the awl to access the drawer?
(This could make way for a "classic" marlinspike on the back...?
)No actually the inline awlnis too long to play nice and fit in one layer with the caplifter.
thinking of what tool that could be opposite the awl... Gutting knife from a hunter?
Nope that wont do... does electricians blade fit I wonder? 
Nail nick would be on wrong side but might fit. The awl really only fits with the blade. I once shortened an awl to fit with caplifter but it looked weird.
[/quote]
hmmmm...
what if the awl (and drawer
) would be in its "normal" place at the "back", and marlinspike at the "wrong" side (i.e. front)...?
(just got really fixated on combining awl, drawer and marlinspike. Don't get me started on the rest of the tools i dream of..
)Yeah, I know, probably gonna be an issue with the backsprings... :-\
-
Hey Spyh, I’m wondering, do you accept parts commissions?
Like, say I wanted some 91mm brass liners like you already use, with 2.5 and 2.25mm holes instead of 1/8” holes? -
@Don Pablo said:
Hey Spyh, I’m wondering, do you accept parts commissions?
Like, say I wanted some 91mm brass liners like you already use, with 2.5 and 2.25mm holes instead of 1/8” holes?Nope everything I make has 1/8 holes.
-
I really love that SAK with the Maple Leaf...now you are pulling my heart strings... :)
-
Me too ....
Must have some Canadian in me somewhere
??? :D -
Super busy Sir?
I am going to need a drawer mod knife.
Please take my monies.
-
Would be cool to buy spring plus scissors for 84 mm that you planned on tuning from 91 mm. That and two liners (I'm thinking of getting a cadet 2017 LE and add the scissors and upgrade the liners). That anything you'd be willing to do.
Just thought of the holes. You be willing too sell pivots and screws too? I realise this pretty much ends up with a lot of work but if you're willing then I'm interested!
- stoneshank
-
@HarleyXJGuy said:
Super busy Sir?I am going to need a drawer mod knife.
Please take my monies.
I'm building a dozen pioneer x with drawer this week if you want one of those?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
