MLCT Crony - Need your input!
-
But its a prettier rust...if that means anything. I always thought a patina was strange, it makes since, but still strange, but I do like the way it looks.
-
Damascus!
And not the fake patina stuff; the real deal. It might take you a few decades to perfect the process, but you could charge $2000 for each Crony then.
If tool steel is really what you want, 4130 is fine. Reasonable cost, difficult but not impossible to machine. No additional heat treat necessary.
When you start shopping for the exotics like D2 from botique foundrys like Crucible, you're gonna be in way over your head. Might be worth it if you were making a knife, but the Crony doesn't have an edge anywere. Doesn't make sense if you ask me.
Aluminum would be fine I would think... a nice 6061 in a T6 temper. Tough and cheap as a material. You can't get enough torque on such a short tool to damage it, can you? Plus you could anodize, hardcoat, passivate, etc. Pretty colors!
Just my never humble opinion. ::)
-steve
-
@SteveRacer said:
Aluminum would be fine I would think... a nice 6061 in a T6 temper. Tough and cheap as a material. You can't get enough torque on such a short tool to damage it, can you? Plus you could anodize, hardcoat, passivate, etc. Pretty colors!It got my attention :o That would be very cool.
-
Aluminum won't work. It doesn't have the hardness compare to steel nuts to resist stripping, the whole tool may not break but wrench tooth would be damaged the first time it slips.
-
Yup, as would the screwdriver and prybar tip. I made an aluminum prototype with no intention of keeping the part aluminum, but it surely did strip. Not a horrible idea though. PS. no dice on damascus
Too hard for me to get it right, I'm looking to get a relatively easy heat-treat steel.-Dough
-
What if you made it out of 420?
-
420 stainless? the stainless steels have a much more complicated heat treat unfortunately...ill look into the 420 with more detail, but I know the carbon and tool steels are easier to heat treat.
-Dough
-
As long as you don't go for something that will turn orange at the sight of water I don't think it will be an issue.
-
Yeah stainless is not really necessary. One thing thou, I don't see where it would attach to keychain easily.
-
@DoughDTD said:
420 stainless? the stainless steels have a much more complicated heat treat unfortunately...ill look into the 420 with more detail, but I know the carbon and tool steels are easier to heat treat.-Dough
howbn about 5160, same steel used in truck spring. Cheap and plentiful from the nearest junkyard
-
Good news gents!!! I know this is slow moving, I cant even tell you how busy I've been with school, but I found a source for magnifying lenses that will work PERFECTLY for the Crony!!! From what it seems like, many of you really want it. It will be small, similar to the size of the hole seen in the prototypes and pictures, but definitely functional. Its going to be slightly larger than the original Vic SAK. So, looks like the mag is going to be good to go, and as soon as classes end and I graduate I'm going to be cranking these out full time!
-Dough
-
That's good news. I'd live without the magnifier personally but it will certainly make it stand out from the crowd.
Neil
-
I don't know if this has been mentioned in this thread (it's a very long thread) but if the magnifying glass were capable of starting a fire it would be a great piece of kit.
-
@DoughDTD said:
Good news gents!!! I know this is slow moving, I cant even tell you how busy I've been with school, but I found a source for magnifying lenses that will work PERFECTLY for the Crony!!! From what it seems like, many of you really want it. It will be small, similar to the size of the hole seen in the prototypes and pictures, but definitely functional. Its going to be slightly larger than the original Vic SAK. So, looks like the mag is going to be good to go, and as soon as classes end and I graduate I'm going to be cranking these out full time!-Dough
That's great news!

-
That is good news, I always thought the magnifying glass makes for a great unique selling point.
-
++ on the magnifier!
-
Got a status report on this? I've been gone awhile but I'm still interested. :D
EDIT: Sorry, revived something old, found the newer one... bleh, what happened to the deleting?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login