Access to Power -SOG 30-day Challenge! Starting June 1st! Access & Access Deluxe
-
Have a safe trip Nix

-
Thanks, W. Will do my best. :D

-
+1

@Wspeed said:
Yes the challenge is still starting on the 1st of June
And would love to see more members joining us
Sorry again for the mix up Nix

I'm looking forward to this challenge. Will be my first SOG challenge and first time being with only one of the newer SOG models.
Heck, I'll be happy, even if just four of us are brave enough to ride out 30 days solely using the PowerAccess/Access Deluxe.
= people sitting this one out. :D -
Access and Access Deluxe hangin' with the Pint. Previous gen SOGs in the background.


-
Excellent pic for comparing
the different models of SOG
Nice one GLBM

-
Got outside on my day off. :)
SOG PowerAccess and Pint by None, on Flickr -
@gerleatherberman said:
Got outside on my day off. :)Wow that PAD looks huge next to the PA

And what is that little SOG
Is that the Pint
-
Got outside on my day off. :)
Wow that PAD looks huge next to the PA

And what is that little SOG
Is that the Pint
Thank you, W!

The PowerPint indeed. Last one in the set needed is the PowerLitre when I can get one. The Pint is pretty cool for what it is. :) -
So I have been gone a while but as some of you may know I am the MTO officer in charge of checking lists for completeness and such.
In my official capacity while reviewing your challenge list I noticed no mention of a C4 / TNT test?
Very disappointed.
-
@HarleyXJGuy said:
So I have been gone a while but as some of you may know I am the MTO officer in charge of checking lists for completeness and such.In my official capacity while reviewing your challenge list I noticed no mention of a C4 / TNT test?
Very disappointed.

I've got a few bottle rockets. Maybe strap them to the PAD and see if it'll move a little. :DBTW. Now the FBI will be keeping tabs on the PowerAccess challenge thread. :ahhh :D
-
So I have been gone a while but as some of you may know I am the MTO officer in charge of checking lists for completeness and such.
In my official capacity while reviewing your challenge list I noticed no mention of a C4 / TNT test?
Very disappointed.

I've got a few bottle rockets. Maybe strap them to the PAD and see if it'll move a little. :DBTW. Now the FBI will be keeping tabs on the PowerAccess challenge thread. :ahhh :D
At least we destroyed the original list.

-
Just got mine

So:
01 - Nix
02 - Wspeed
03 - gerleatherberman
04 - Don Pablo
05 - Dutch_Tooler -
Excellent DT nice to have you joining us
How are you liking the PAD so far

-
Only fondled it a little and briefly looked at the tool complement. Pliers system seems well thought out, as well as the use of the available space overall. Some tools seem flimsy in comparison with e.g. LM, such as the can opener and knife blades. Also, the locking bar springs look adventurously underdesigned...
-
That’s why it’s good to have this challenge
Hopefully we can see if the PAD will still
Be in one piece after 30 days of use

-
So I have been gone a while but as some of you may know I am the MTO officer in charge of checking lists for completeness and such.
In my official capacity while reviewing your challenge list I noticed no mention of a C4 / TNT test?
Very disappointed.

I've got a few bottle rockets. Maybe strap them to the PAD and see if it'll move a little. :DBTW. Now the FBI will be keeping tabs on the PowerAccess challenge thread. :ahhh :D
Let me see what i can work out.
-
Used the caliper and found the implements to be notably less robust. Just as DT estimated. However, with that being said, the tools ARE shorter than a ST300's tools. So torsion failure should be SLIGHTLY reduced on the thinner shorter tools of the PAD.
Half a millimeter thinner blades and drivers compared to the ST300. The can openers are equal in thickness though.
First two pics are can opener and second two pics are plain blades.
Following post will be large flat head driver.



-
The large flat driver.
Don't forget to grind down(or use a coarse sharpening stone perpendicular to the tip) the flat tip on the PAD large flat head driver to make the point much thicker/stronger. 0.3mm or 0.4mm of material removed should do the trick.


-
Thanks for the measurements gerleatherberman, hadn't taken a caliper to it yet. True, overall size of all blades and implements is more compact than I know for LMs of comparable size, but I put this down to the additional space needed in the SOG for the plier mechanism and the PAD does seem to optimise space use (and weight) more than comparable LMs generally do.

Sent on my SM-G930F with Tapatalk
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login