What did you just get?
-
Technician's Pocket Screw Driver (4 driver heads: reversable PH00 and 1.5 slotted; PH1 and 3.0 slotted) with magnetic cap
Gerber shard --- because I knew I'd have to try one someday (I think it's an original as it has a serial number 8970117A on the back, and sharp PH head)
Kershaw PT-2 --- this is what I wanted, but the other stuff just jumped into my cart.....
Field Notes notepads (for the Mrs)Ah... I was looking at that screwdriver a few weeks ago, I was quite tempted to get one. What do you think, are they good? Oh, and field notes...

-
I wanted the black version of the Technician's Pocket Screw Driver but selected the wrong one --- but the gold/brass colour looks OK.
The driver heads are not standard 4mm or 5mm hex. Not sure exactly what type they are, if I need replacements or spares or other sizes/types. The screwdriver body is aluminium I think, as it does not stick to the magnet in the clip head. The internal bit drivers were greased, and the whole unit feels 'machined'. The magnetic cap is engraved "CAGE: 5VKB6 U.S." I think there are plastic versions, and I think Stanley do something similar?
So far I have only tightened up the small screws on my glasses. I think for relatively light work this would be a useful screwdriver to have on hand. YMMV. But I think I like it, and it may go in my day-to-day office work bag.
-
Got a freebie in the mail today [emoji16]
A bit holder that is double sided so it's faster/easier to change bits and you can change bits in the round holder, don't know if it's any good but it feels sturdy [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
@BePrepared said:
I wanted the black version of the Technician's Pocket Screw Driver but selected the wrong one --- but the gold/brass colour looks OK.The driver heads are not standard 4mm or 5mm hex. Not sure exactly what type they are, if I need replacements or spares or other sizes/types. The screwdriver body is aluminium I think, as it does not stick to the magnet in the clip head. The internal bit drivers were greased, and the whole unit feels 'machined'. The magnetic cap is engraved "CAGE: 5VKB6 U.S." I think there are plastic versions, and I think Stanley do something similar?
So far I have only tightened up the small screws on my glasses. I think for relatively light work this would be a useful screwdriver to have on hand. YMMV. But I think I like it, and it may go in my day-to-day office work bag.
Thanks for that. Yeah, I had the Stanley one a few years ago which was alright, but nothing to write home about... mainly because it was quite plasticy. Come to think of it I might still have it?
I'll have a look - If I find it I'll measure the bits. I do like the look of your one though. -
OK, I made mistake about bit sizes.... this screwdriver seems to have ~5mm hex bits, not the more common 4mm precision bits or 1/4 inch = 6.35mm regular bits we see all the time. If the Stanley unit has ~5mm double ended bits then I guess they will fit this screwdriver too (so I now know where to get replacements! as the Stanley screwdriver and bits is cheap).
I'd say this would function just like the Stanley, but has a magnetic head, and metal body, so it looks and feels good. Now, if they made one in Ti
it would probably cost $100 :ahhh -
I have an addiction- tools and knives. Fortunately, my state government not only enables but it subsidizes this.
Sharp sale yesterday, didn't get a whole lot. A couple of little knicknacky items that aren't worth mentioning here, but the big item was a Wave. Fixed cutters, but with the modular drivers. Prices were jacked up compared to years past- I've seen them selling Waves for $20 (my first gen Wave w/ the fixed drivers) to $25. I need to clean it up, but this has security torx so I should be able to get it apart pretty easy. Then I'll probably carry i for a while, and if it doesn't win me over..... Then I'll have to wait until I find a Rebar to mod.
Oh, could I get the drivers into a PST?
-
More junk, another cooling towel, this time a mission enduracool, wet it, ring it, then snap it like 5times and it’s suppose to drop like 30deg, of course I had to try it even though it’s in the 40s, anyway, it does drop I don’t think 30deg but it does do something(maybe I can do tests) and it feels soft unlike that other one I got that feels funky.. also got 100’ extension cord for the weed wacker, a nice push broom to clean up, and of course a pack of skivvies, hey there an everyday tool

JR -
Unlike the Mrs who got herself a few new pieces of clothing because her others were getting very big! She’s down to her lowest #s in over 10yrs, even got her a belt so she can still wear her others without dropping them, lol. So proud of her!
JR
-
Congrats to the Mrs., Plumb!
Good for her. I, on the other hand, am the heaviest I've ever been, plus...I have my mother's hips.
On a tools note:
Last week I picked up a barely used, pre- 1985 Sears Craftsman 2hp 7 1/4 in circular saw. From back when they were still made by Diehl out of Jersey. Got it from a Craigslist ad. $15.
Also picked up a Fiskars bow saw at a giant flea market. Almost new condition. $3.
They had some Swiss Army Knives and some old PST'S there, too, but condition vs price, plus the fact that I have some, left me to leave them alone. Even the Vic Angler. The scales were a little scratched up. If anyone tells me a scratched up Angler is worth $15, I will go back this week and get it for you.
And today, the Victorinox Rucksack arrived in the mail.
Yay!
-
@MadPlumbarian said:
Unlike the Mrs who got herself a few new pieces of clothing because her others were getting very big! She’s down to her lowest #s in over 10yrs, even got her a belt so she can still wear her others without dropping them, lol. So proud of her!
JRWell done
you can be very proud -
Unlike the Mrs who got herself a few new pieces of clothing because her others were getting very big! She’s down to her lowest #s in over 10yrs, even got her a belt so she can still wear her others without dropping them, lol. So proud of her!
JRWell done
you can be very proudTy, and I am!
JR -
Well, I just got my very belated package from Giant for being a seed tester.. now those seeds look to be very interesting honey mustard mixed with bbq! Hmmm..
JR
-
Just received my U-Boat Escape Tool CRKT M16-13SF from the mighty Ron Who. Cheers Ron, this thing is a Beast! I love it


-
Unlike the Mrs who got herself a few new pieces of clothing because her others were getting very big! She’s down to her lowest #s in over 10yrs, even got her a belt so she can still wear her others without dropping them, lol. So proud of her!
JRWell done
you can be very proudWell done by her. Terrific accomplishment

-
A burnished swisstool spirit x




-
Three Tekut multi tool gift sets with K1 Nextorches.
-
Sweet Spirit Kev !

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





