Let's talk pens!
-
Like with multitools, I don't really have any loyalties when it comes to pens. It either works for me, or it doesn't, and the name that's written on it is less important then the function and comfort.
Top Photo Attached:
I keep two pen pots, one upstairs and one downstairs, and they both have similar things in them. Scissors, propelling pencil, traditional pencil, refillable pens, disposable pens, bullet marker, italic marker, paper knife/letter opener, can all be found in each pot. Also in one of them is my two fountain pens, and a syringe for refilling the cartridges. I've found this far more efficient than using converters - in fact one pen only has a converter, and I refil that with a syringe too. I also have a tub of spares, and have way more pens than necessary. They just seem to accumulate, with no real intention to own more - where have we come across that problem before.... ::)
Middle Picture Attached:
Here's a sample of some of the pens. On the left hand side at the top with the clips to the left, are disposable pens that I have multiples of.
Uniball Signo 207 and Gel Grip (not shown)
Zebra Marathon gel pen
Offbrand (?) gel pen
Zebra Z-Grip
Papermate Flexgrip UltraBelow that are branded pens, the likes of which are used as corporate giveaways or souvenirs. Some of these are really nice to write with. Five of the six shown are refillable, and there's a couple of others floating around somewhere too.
On the right hand side, from the top, clips to the right, are a few of the markers.
Sharpie Fine Point bullet marker
Berol Italic marker (Medium and fine)
Manuscript Italic marker (M & XB)Below those, clips to the left, are an assortment of refillable pens.
Airpress Tombow
Rite In The Rain click pen
Offbrand ballpoint
Messograph
Parker Jotter
Zebra F-301
Olivewood pen which has a matching mechanical pencilBottom Picture Attached
My fountain pens are a Parker Vector calligraphy set, and a cheapo Lamy Safari clone. The Diamine Grape is the only ink I have at the moment, aside from the couple of Quink cartridges left in the calligraphy set. I hope to add a few more Diamine inks, as I've been very happy with this one in both pens.



-
Randomly picking one of the pen threads to ask my questions:
I just picked up a zebra f-701 and did the f-402 clicky mod and added a space pen refill as well.
After doing some more reading, I learned that the smooth part of the barrel and the knurled grip section are two separate pieces and the inside liner is plastic (I knew that part from doing the mods). Just curious if anyone has ever had a problem with breaking these pens, specifically any of the plastic parts?
They're so much cheaper than any of the popular machined pens available that even if they do break they'd still be cost effective, but I'm just curious. Plus I don't really love plastic in my edc items, if avoidable.
Pic is of the modified pen.

-
@Pablo O'Brien said:
Plastic? Bleh.

:P
;)Oh I’d love something solid metal and not thin walled, but for now if I lose one of those plastic ones it’s no big deal..
JRAnybody knows this Pablo O'Brien?!


-
@Pablo O'Brien said:
Plastic? Bleh.

:P
;)Oh I’d love something solid metal and not thin walled, but for now if I lose one of those plastic ones it’s no big deal..
JRAnybody knows this Pablo O'Brien?!


Does he live in your area? Pablo sounds like a Portuguese name.

-
@Don Pablo said:
@Pablo O'Brien said:
Plastic? Bleh.

[emoji14]
;)Oh I’d love something solid metal and not thin walled, but for now if I lose one of those plastic ones it’s no big deal..
JRAnybody knows this Pablo O'Brien?!


Does he live in your area? Pablo sounds like a Portuguese name.

Yes, I know him.
Like mags has said earlier:
A little immature but we miss him.And he was the one who was called "The Bender".
He is the actual origin of "Pabloing".He probably left in shame...
-
What do you all think of this?
I'm not 100% satisfied with my recent zebra mod, mainly due to the plastic internals. So I was looking at other machined pens. Came across this CRKT/Ruger collaboration which is a licensed copy of the Fellhoelter tibolt in aluminum.
It is a nice weight, seems well made. Best part is its under $30 on eBay. Don't care much for the Ruger branding, though all 3 of my firearms happen to be rugers. Just prefer a plain look.
Just can't decide if it's worth $30 when I get my normal pilot G2 pens for free at work.




-
With my LCP.
It also matches my other main edc items


-
Check earlier in this thread, for the F-xMD
I have the Zebra F-xMD --- it's very similar to the F-701, looks the same but is (almost) all metal. Zebra say the F-xMD is good if you are a surgeon or work in a pie factory, because all pieces of the pen are metal and will show up on X-ray if you loose it!

I know people have modded the F-701 using the clicker part from the F-402, to get a metal clicker mechanism. But the F-xMD has that now. The only plastic piece I can see is an insert in the tip that stops the refill from rattling. I replaced the Zebra refill with a space pen refill, and had to slightly enlarge the hole in this plastic piece to get a smooth action.
But the F-xMD is silver/metallic. So maybe if you get G2 pens at work, look at Kickstarter for pens that take a G2 refill?
-
@gustophersmob said:
What do you all think of this?I'm not 100% satisfied with my recent zebra mod, mainly due to the plastic internals. So I was looking at other machined pens. Came across this CRKT/Ruger collaboration which is a licensed copy of the Fellhoelter tibolt in aluminum.
It is a nice weight, seems well made. Best part is its under $30 on eBay. Don't care much for the Ruger branding, though all 3 of my firearms happen to be rugers. Just prefer a plain look.
Just can't decide if it's worth $30 when I get my normal pilot G2 pens for free at work.
Well, even though I still wrestle with my minimal amount of writing is deserving of an almost $30 pen, I decided to make some mods and keep it.
The first mod was to change the stock spring with a slightly longer one from a leftover zebra f-402. The original spring did not extend past the refill tip and the bolt would rattle a bit when the pen was retracted. The longer spring fixed the rattle and also made the action feel much more positive.
Second mod was to slightly rebend the pocket clip so that it didn't grab quite so hard. It was a two hand job to clip it to even the thinnest shirts before. Now I can one hand clip it to jeans. It still feels secure once clipped.
Third mod was to take a sharpie to the Ruger branding. Doesn't look the cleanest up close, but looks fine at arms length to me.



-
@Don Pablo said:
@Pablo O'Brien said:
Plastic? Bleh.

:P
;)Oh I’d love something solid metal and not thin walled, but for now if I lose one of those plastic ones it’s no big deal..
JRAnybody knows this Pablo O'Brien?!


Does he live in your area? Pablo sounds like a Portuguese name.

More like a spanish name...

We don't get along (like most neighbours).

-
@Don Pablo said:
[quote author=Pablo O'Brien link=topic=74000.msg1650169#msg1650169 date=1520190161]
Plastic? Bleh.
[emoji14]
;)Oh I’d love something solid metal and not thin walled, but for now if I lose one of those plastic ones it’s no big deal..
JRAnybody knows this Pablo O'Brien?!


Does he live in your area? Pablo sounds like a Portuguese name.

Yes, I know him.
Like mags has said earlier:
A little immature but we miss him.And he was the one who was called "The Bender".
He is the actual origin of "Pabloing".He probably left in shame...
[/quote]Miss Him!

-
@gustophersmob said:
What do you all think of this?I'm not 100% satisfied with my recent zebra mod, mainly due to the plastic internals. So I was looking at other machined pens. Came across this CRKT/Ruger collaboration which is a licensed copy of the Fellhoelter tibolt in aluminum.
It is a nice weight, seems well made. Best part is its under $30 on eBay. Don't care much for the Ruger branding, though all 3 of my firearms happen to be rugers. Just prefer a plain look.
**
Just can't decide if it's worth $30 when I get my normal pilot G2 pens for free at work.**For the kewl factor *plus *fidgeting capabilities *plus *pride of ownership, I'd say Yup!
-
-
:ahhh

-
What do you all think of this?
I'm not 100% satisfied with my recent zebra mod, mainly due to the plastic internals. So I was looking at other machined pens. Came across this CRKT/Ruger collaboration which is a licensed copy of the Fellhoelter tibolt in aluminum.
It is a nice weight, seems well made. Best part is its under $30 on eBay. Don't care much for the Ruger branding, though all 3 of my firearms happen to be rugers. Just prefer a plain look.
Just can't decide if it's worth $30 when I get my normal pilot G2 pens for free at work.
Well, even though I still wrestle with my minimal amount of writing is deserving of an almost $30 pen, I decided to make some mods and keep it.
The first mod was to change the stock spring with a slightly longer one from a leftover zebra f-402. The original spring did not extend past the refill tip and the bolt would rattle a bit when the pen was retracted. The longer spring fixed the rattle and also made the action feel much more positive.
Second mod was to slightly rebend the pocket clip so that it didn't grab quite so hard. It was a two hand job to clip it to even the thinnest shirts before. Now I can one hand clip it to jeans. It still feels secure once clipped.
Third mod was to take a sharpie to the Ruger branding. Doesn't look the cleanest up close, but looks fine at arms length to me.
Well, I noticed that after only a few days of use that the bolt was rubbing through the supposed hard anodizing on the inside edges of the J-channel. The little nub of the J-channel was also starting to wear into the aluminum. This is surprising more so because I'm 99% sure the bolt itself is aluminum and shouldn't be able to wear through HAIII. I contacted the vendor, and they agreed it was defective, now it's on its way back.
I'm back to the drawing board looking for a relatively inexpensive all metal edc pen that doesn't use a cap.
-
How it's done. I liked to see how a fountain pen is made but didn't like the carelessness displayed with the product and the tools...
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
This one, however...
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
-
-
Okay, every now and then I misread the topic titles but this time I'm so not saying how I read this one...

-
And I got to another full hundred!
-
-
My current nice pens.
L-R:
Fisher bullet space pen with fine refill
Zebra f-701 modded with f-402 nock and fisher fine refill
Bigidesign titanium pen with uni-ball 207 refill

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login