Wave Owners Club
-
@Sam Lim said:
I happened to do some tools swapping today. The rebar AWL will not fit into the place of the small bit holder. It's too thick.
Half SOG half LM?

Non stock tools from a old pst. I kinda like the more centred philips. And it's half the size of a modern Philips so I can fit in 3 tools rather than 2..

-
@Sam Lim said:
I happened to do some tools swapping today. The rebar AWL will not fit into the place of the small bit holder. It's too thick.Damn, i may need to do then little grinding on awl to fit it in. I need more awl than small bitdriver.
Only Tools Matters
-
@Antti Lammi said:
@Sam Lim said:
I happened to do some tools swapping today. The rebar AWL will not fit into the place of the small bit holder. It's too thick.
Damn, i may need to do then little grinding on awl to fit it in. I need more awl than small bitdriver.
Only Tools Matters
If u have access to grinder, I suggest u reshape other tools. Try to find a ok-ish rebar. They are rather affordable. The smaller flathead thickness should fit in fine I think. Re-profiled it to your preferred shape for for an awl.

-
-
@Sam Lim said:
@Antti Lammi said:
@Sam Lim said:
I happened to do some tools swapping today. The rebar AWL will not fit into the place of the small bit holder. It's too thick.
Damn, i may need to do then little grinding on awl to fit it in. I need more awl than small bitdriver.
Only Tools Matters
If u have access to grinder, I suggest u reshape other tools. Try to find a ok-ish rebar. They are rather affordable. The smaller flathead thickness should fit in fine I think. Re-profiled it to your preferred shape for for an awl.

Thx for idea, its maybe better do that way
Only Tools Matters
-
@BePrepared said:
This is the layout on my WaveYou'd need to pull off the pliers head rest from inside the body for the PH to fit, but width-wise, this combination works.
Hmm good layout bit maybe that combination doesnt serve very well on my needs, i need all four outside tool daily, scissor are used sometimes like every other tool except small bitdriver.
I shaped can opener more useful for my use and i need now only straight blade awl on wave to serve my purposes more
Only Tools Matters
-
20180516_171937 by Poncho 65, on Flickr -
The recently acquired Wave + and two Frankenstein Waves I bought from TTC last year. In term of fit and finish, this Wave + is as perfect as a new-gen Wave can be. No tool rubbing or adjustment is needed. Most of the new-gen Wave I bought had the pliers pivot a bit tighter than I like.
The 2 freakish Waves were impulse purchases. I got some botched gold plating, CC pliers heads, S30V blades, crazy color scheme... what not to love? For sure, my Waves conduct electricity better than your plain factory Waves :D.

-

Good lookin tools!
-
They look cool 8) and glad the + was good in terms of QC

-
@chrono said:
The recently acquired Wave + and two Frankenstein Waves I bought from TTC last year. In term of fit and finish, this Wave + is as perfect as a new-gen Wave can be. No tool rubbing or adjustment is needed. Most of the new-gen Wave I bought had the pliers pivot a bit tighter than I like.The 2 freakish Waves were impulse purchases. I got some botched gold plating, CC pliers heads, S30V blades, crazy color scheme... what not to love? For sure, my Waves conduct electricity better than your plain factory Waves :D.
So I decided to tone down the blingy-ness of the middle Wave a little. I stripped off all four gold-plated blades, and replaced with uncoated ones. The S30V blade was replaced with a TTC-made S35VN. This S35VN blade is thicker, and has a nice matte gray finish. For some reason, it did not fit correctly on Charges, but is perfect on this Wave frame. The serrated blade with gut hook was replaced with one from a Charge Ti. One reason I like Charge Ti is its blades are polished. This one will be a gift for a friend :D



-
That's still alot of blink blinks.
😎 -
20180523_161031 by Poncho 65, on Flickr

-
2018-07-20_03-32-43 by Poncho 65, on Flickr -
Just sliced my finger on the spine of the saw on my new Wave+ when closing the blade.

Going to need to file that sucker down a bit.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



