NEW Leatherman SURGE owners club.
-
My Surge got called into action this morning when my Dog's outside pen blew over. I hammered in some star pickets and then used wire to tie the bottom rail to them. I wish the needle nose portion had more aggressive teeth, trying to twist up the wire in the rain they just slipped a lot

-
@TazzieRob said:
My Surge got called into action this morning when my Dog's outside pen blew over. I hammered in some star pickets and then used wire to tie the bottom rail to them. I wish the needle nose portion had more aggressive teeth, trying to twist up the wire in the rain they just slipped a lot


-
@TazzieRob said:
My Surge got called into action this morning when my Dog's outside pen blew over. I hammered in some star pickets and then used wire to tie the bottom rail to them. I wish the needle nose portion had more aggressive teeth, trying to twist up the wire in the rain they just slipped a lot

I believe that the latest(last year or two) replaceable cutter head on the Surge/ST300 have coarser teeth than the fine toothed pliers on the slightly older ones. My 2017 Surge has very coarse(aggressive) teeth on the needle nose. I'm not 100℅ sure, but am fairly certain. :)
-
@TazzieRob said:
I wish the needle nose portion had more aggressive teeth, trying to twist up the wire in the rain they just slipped a lotI wonder if a blunt nose would have helped as more gripping surface area and shorter levers...

-
@TazzieRob said:
I wish the needle nose portion had more aggressive teeth, trying to twist up the wire in the rain they just slipped a lotI wonder if a blunt nose would have helped as more gripping surface area and shorter levers...

Absolutely. Proper fencing pliers are broad and maintain parallel jaws through the full range (at least the Gallagher brand ones my dad had on the farm did). I could have spent the 30 seconds going to the garage to get my blunt nosed pliers

-
Surge hanging out with some stuff I used to fill in replacement cedar. :ahhh

-
Thank you, Obi1!
That cedar chest has a long way to go to be finished, but the bulk of the structural is done. Tomorrow is wood filler, sanding, profiling, and staining. Then maybe some old wood wheel casters for the heck of it. A week from then it gets a sealer and wax. I've been using the Surge to pull nails out that didn't hold anything together.
-
Love to see the finished product
Great pic 
-
@gerleatherberman said:
Surge hanging out with some stuff I used to fill in replacement cedar. :ahhhGreat stuff gerleatherberman

-
-
Carried my "go-to" tools today.

-
Love to see the finished product
Great pic 
Thank you, Poncho!
I'll take a pic of the final result tomorrow. :)

and also a
for the last pic 
-
Since I recieved my Surge (around 6 months ago), it has been clipped to my pocket every single day. It’s my go to tool and I am never without it. The Surge has really impressed and I believe I have found the tool that will see years and years of carry and use. I used to be all about trying every tool and always carrying something different. I must admit, I have tried just about everything Leatherman has made and the Surge is the winner in my book.

-
@captain spaulding said:
Since I recieved my Surge (around 6 months ago), it has been clipped to my pocket every single day. It’s my go to tool and I am never without it. The Surge has really impressed and I believe I have found the tool that will see years and years of carry and use. I used to be all about trying every tool and always carrying something different. I must admit, I have tried just about everything Leatherman has made and the Surge is the winner in my book.

I have carried my Surge every day at work for the last 4-5 years I have had it. I can cut stuff, I can loosen or tighten screw stuff, I can file burrs, I can hold a nut or turn a bolt. I can use the bits to open a panel with an Allen or Torx bolt or just the plain old screw drivers. It's just so damn handy
-
+1 guys

And the scissors are awesome too!
-
Some Surge action:
Last weekend the Surge helped me fixing the electric window on the front left side of our only car

Some torx screws were quite a bit recessed.
Good I've got the bit-adapter.




Extracted the control module for the motor located where I drew the orange lines...

... opened it...

... and found some corrosion at the contract pins...

Cleaned them and put all back together.
And it works again :ahhh -
Well this is quite embarrassing but I’ll swallow my pride and ask. I am a saw guy over a file guy but I want to give the file a fair chance to prove itself in my Surge. I tried exchanging the saw for the file but for the life of me I cannot figure out how to change them. The blade exchanger has bested me. I cannot find any text online to explains it either. Can one of you fine ladies or gents please give me a step by step.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login