Access to Power -SOG 30-day Challenge! Starting June 1st! Access & Access Deluxe
-
Used the caliper and found the implements to be notably less robust. Just as DT estimated. However, with that being said, the tools ARE shorter than a ST300's tools. So torsion failure should be SLIGHTLY reduced on the thinner shorter tools of the PAD.
Half a millimeter thinner blades and drivers compared to the ST300. The can openers are equal in thickness though.
First two pics are can opener and second two pics are plain blades.
Following post will be large flat head driver.



-
The large flat driver.
Don't forget to grind down(or use a coarse sharpening stone perpendicular to the tip) the flat tip on the PAD large flat head driver to make the point much thicker/stronger. 0.3mm or 0.4mm of material removed should do the trick.


-
Thanks for the measurements gerleatherberman, hadn't taken a caliper to it yet. True, overall size of all blades and implements is more compact than I know for LMs of comparable size, but I put this down to the additional space needed in the SOG for the plier mechanism and the PAD does seem to optimise space use (and weight) more than comparable LMs generally do.

Sent on my SM-G930F with Tapatalk
-
@Dutch_Tooler said:
Thanks for the measurements gerleatherberman, hadn't taken a caliper to it yet. True, overall size of all blades and implements is more compact than I know for LMs of comparable size, but I put this down to the additional space needed in the SOG for the plier mechanism and the PAD does seem to optimise space use (and weight) more than comparable LMs generally do.

Sent on my SM-G930F with Tapatalk

Nice picture and congrats on getting the PAD!
Indeed, the pliers and outside tools create compromises. I am just going to try and not over exert the tools if possible during the challenge. I really like the design and engineering aspects of the PAD though. :) -
Thanks

One thing I like a lot already is the bit set and the possibilities on the PAD to use it, including the 90° lock stop on the stub for the bit driver extension.
Another is the sheath's Molle attachment that also permits horizontal carry on narrower belts...

Sent on my SM-G930F with Tapatalk
-
Nicely done with the measurements GLBM
And some great pics DT
Can’t wait to get my replacement PAD
It’s in Customs at Coventry at the moment :ahhh :ahhh -
@Dutch_Tooler said:
Thanks
One thing I like a lot already is the bit set and the possibilities on the PAD to use it, including the 90° lock stop on the stub for the bit driver extension.
Another is the sheath's Molle attachment that also permits horizontal carry on narrower belts...

Sent on my SM-G930F with Tapatalk

The bit set appears to be very well made. Glad you mentioned that! Another good thing about the PAD. :) -
Getting ready for the upcoming challenge!
(https://flic.kr/p/25ZcGjc) by None, on Flickr -
That’s a nice pic GLBM

-
Everyone geared up for the challenge? Not long now. :ahhh :)
PAD, Champ, and Exert by None, on Flickr -

Gonna start keeping it in my pocket now!

-
Not long now

-
@Don Pablo said:

Gonna start keeping it in my pocket now!

Did yours come with that pocket clip? Just curious - I'd probably carry it in the sheath anyway...
Yup, it did. :)
And it’s a regular poweraccess, not a poweraccess deluxe. -
@Don Pablo said:
@Don Pablo said:

Gonna start keeping it in my pocket now!

Did yours come with that pocket clip? Just curious - I'd probably carry it in the sheath anyway...
Yup, it did. :)
And it’s a regular poweraccess, not a poweraccess deluxe.Oh, I see, thanks - I was just trying to imagine pocket-carrying a Deluxe. Not my preferred option because of the bulk.
-
I hope everyone is ready for the Challenge tomorrow
And Nix should be joining us on Wednesday to start the challengeThis will be my first 30 day Challenge
And I am looking forward to test the PAD
To see if it’s a good quality tool or notCan’t wait to see what we can come up with
Good luck everyone that’s joining the challenge
And let’s have a awlsome time
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login