Show us your Spyderco
-
My Dragonfly Tattoo. A wonderful knife!



-
My collection numbers about 150, half of them SAKs, no MTs. At least 10 Spyderco, 1 Cold Steel (Pocket Bushman).
-
Pac Salt again for me ::) :D
20180516_171950 by Poncho 65, on Flickrblack or yellow, I like both


This seems like a good placeto ask.
Why all the love for the Pacific Salt?
Thinking about grabbing one to give SE another chance.
-
Pac Salt again for me ::) :D
black or yellow, I like both

This seems like a good placeto ask.
Why all the love for the Pacific Salt?
Thinking about grabbing one to give SE another chance.
I'll only talk for myself but:

-
One of the longest **blade lengths for the weight **you can find, in Spyderco and other brands
-
No liners or steel in the handle to accumulate dirt, water, lint, etc. while still durable and sturdy
-
**Big ****Spyderhole **for easy opening with either hand, and with or without gloves
-
Very** thin body** due to lack of liners, very **lightweight **to carry in any pants, shorts, sport clothes, swimsuit, etc. without pulling it down
-
Tougher tip than PM2, Military etc. to resist more torque and stand up to abuse, and not puncture rafts, boats, lifesavers etc.
-
**FRN **with special texture for grippy, secure, easy to wash and maintain handle that is affordable, resistant, lightweight and reliable
-
**Backlock **is arguably the strongest lock type, and this one has a Boye dent for safer use, easy to use with both hands
-
**Yellow **colorful handle ---> friendlier looking, easier to spot, not the typical boring black, can be RIT-dyed to another color
-
Affordable, always available for $70-80 new
-
Rust proof period. Sand, grit, lint, dirt, mud, water, oils, acids, chemicals, this one won't rust or pit, neither the blade nor the hardware
-
**Clip **(Current one):swappable with a coin, no need of screwdrivers, is a tough clip, rustproof and hourglass type for better ergonomics in hand
-
The **steel **will hold a great edge for long in SE configuration, is very tough and won't chip easily, can be sharpened quickly to scary sharp
and -
Comes in big size (Pacific), Small size (Salt I) and other formats (DF2 Salt, Tasman, Spyderhawk)
I definitely recommend it,
especially the older model. In 2018 they changed the handles to the Endura 4 type handles and new clip with three torx screws, both changes for the worst IMO 
-
-
Pac Salt again for me ::) :D
black or yellow, I like both

This seems like a good placeto ask.
Why all the love for the Pacific Salt?
Thinking about grabbing one to give SE another chance.
I'll only talk for myself but:

-
One of the longest **blade lengths for the weight **you can find, in Spyderco and other brands
-
No liners or steel in the handle to accumulate dirt, water, lint, etc. while still durable and sturdy
-
**Big ****Spyderhole **for easy opening with either hand, and with or without gloves
-
Very** thin body** due to lack of liners, very **lightweight **to carry in any pants, shorts, sport clothes, swimsuit, etc. without pulling it down
-
Tougher tip than PM2, Military etc. to resist more torque and stand up to abuse, and not puncture rafts, boats, lifesavers etc.
-
**FRN **with special texture for grippy, secure, easy to wash and maintain handle that is affordable, resistant, lightweight and reliable
-
**Backlock **is arguably the strongest lock type, and this one has a Boye dent for safer use, easy to use with both hands
-
**Yellow **colorful handle ---> friendlier looking, easier to spot, not the typical boring black, can be RIT-dyed to another color
-
Affordable, always available for $70-80 new
-
Rust proof period. Sand, grit, lint, dirt, mud, water, oils, acids, chemicals, this one won't rust or pit, neither the blade nor the hardware
-
**Clip **(Current one):swappable with a coin, no need of screwdrivers, is a tough clip, rustproof and hourglass type for better ergonomics in hand
-
The **steel **will hold a great edge for long in SE configuration, is very tough and won't chip easily, can be sharpened quickly to scary sharp
and -
Comes in big size (Pacific), Small size (Salt I) and other formats (DF2 Salt, Tasman, Spyderhawk)
I definitely recommend it,
especially the older model. In 2018 they changed the handles to the Endura 4 type handles and new clip with three torx screws, both changes for the worst IMO 
Endure handle? Lame. Did the changes come with a name change so I can try and find the older version? Don’t hate the Endurance handle but would like to try the Pacific Salt handle.
RIT dye the yellow handle you say? Last thing I need is another black knife.
-
-
@ ThePeacent and Ron: Sounds great

-
@HarleyXJGuy said:
Endure handle? Lame. Did the changes come with a name change so I can try and find the older version? Don’t hate the Endurance handle but would like to try the Pacific Salt handle.RIT dye the yellow handle you say? Last thing I need is another black knife.
The pre 2018 model has the handle of the Endura 3rd Generation

The new model introduced this year has the Endura 4th Generation handle, which is differently shaped and has a finger choil much more pronounced towards the pivot (which doesn't fit my hand as nicely :P), as well as a triple-screw clip mounting system
and no need to RIT dye it black, you can make it green, red, purple, blue, orange, etc.

Here is a Yellow RIT dyed Tasman ;)
-
Endure handle? Lame. Did the changes come with a name change so I can try and find the older version? Don’t hate the Endurance handle but would like to try the Pacific Salt handle.
RIT dye the yellow handle you say? Last thing I need is another black knife.
The pre 2018 model has the handle of the Endura 3rd Generation

The new model introduced this year has the Endura 4th Generation handle, which is differently shaped and has a finger choil much more pronounced towards the pivot (which doesn't fit my hand as nicely :P), as well as a triple-screw clip mounting system
and no need to RIT dye it black, you can make it green, red, purple, blue, orange, etc.

Here is a Yellow RIT dyed Tasman ;)
What color RIT dye?
-
,

-
Well for me the reason is simple I only have 2 :D I prefer a PE blade and my other Spydie is a full SE Endura ;)
All the rust proofness and lightweight stuff are all just pluses for me though :D
20180523_160931 by Poncho 65, on FlickrThat and I like bright colors

20180523_161019 by Poncho 65, on Flickr -
Cant complain much about this guy, for $20 it's pretty nice, I get a few miss-fires when opening with middle finger or thumb flick, but I imagine it will loosen up over time, It's also a lot lighter weight then I thought it would be and very sharp. can do the one handed closing trick as well.


-
nice ones gentlemen
-
-
you can RIT Dye to whatever color you like as long as it's darker than your original color/tone.
This one is (I believe but don't quote me on that) Warm Red 138 (1 tbsp Cherry Red + 1 tbsp Violet + 1 cup water)

-
You guys need to start beating on your H1........work harden those suckers!

Took the shoulders off the hollow grind freehand with a Lansky stone, ugly as sin but it helps!
"H" from H1 long gone with the polisher >:D


-
@Gerhard Gerber said:
You guys need to start beating on your H1........work harden those suckers!

Took the shoulders off the hollow grind freehand with a Lansky stone, ugly as sin but it helps!
"H" from H1 long gone with the polisher >:D


Love it GG.
Want to get a PE Pacific Salt and have it regroups nice and thin.
Should make for a laser slicer.
-
-
-
I use mine daily for opening boxes and cutting plastic that has been heat shrinked around limestone pallets
I keep it sharp by stropping
it is also relegated for pencil sharpening duties :D I had to wash it the other day because the little dimples in the handle were getting all crudded up with stone dust 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


