Chainsaw file hardness?
-
Were the teeth too full of material too cut anymore ???
-
No they are completely clean, just don't cut. I can see shiny reflection off top of tooth, but duno if it's from the little bit of metal it managed to cut or itself's deformation.
-
Is it a brand name file, or a cheepo from a Flea market? Sometimes they just dont work.
-
It's a house brand for the store, mastercraft by canadian tire if you know it. Made in brazil if I recall, cost me $6 too.
But generally a good file should be able to cut knife blade right?
-
You should have bought a Swiss made file Walmart sells them 2 for $3.95.
-
A lot of cheap files these days are merely surface or case hardened, they dull quickly.
-
Regular files are typically in the low 60's Rc for hardness. Many knife blades are in the middle 50's Rc. That just isn't enough difference. Those shiny spots you are seeing on the file is the cutting edge of each little tooth dulled over.
You are going to need a diamond file jzmtl :-\
-
Aww poo, looks like this will be a lot more work than I originally thought. I think I may go back to my old method of chainsaw sharpening stone and dremel. Used that method on a byrd crossbill before, got a little impatient and messed up a few tooth, although it does cut like a demon afterwards.
-
Send me your address and I'll mail you a used Swiss made file.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

