What did you use your Leatherman for today?
-
@ReamerPunch said:
Opening was easy. Eating it was not. Absolutely gross.

Cool, nice and clean cut [emoji1305]
-
a quick trim and a shave....same thing i do each morning!
there isn't much that you can't do with a Surge!as long as you don't try to do Surgery with your Surge :ahhh :D
A proper sharpening may be required, but who knows really [emoji23]
-
Today the Surge helped me fixing the electric window on the front left side of our only car

Some torx screws were quite a bit recessed.
Good I've got the bit-adapter.




Extracted the control module for the motor located where I drew the orange lines...

... opened it...

... and found some corrosion at the contract pins...

Cleaned them and put all back together.
And it works again :ahhhI'm kinda' proud now

-
Nicely done Matt !

-
Excellent job MTMatt

-
Thanks guys

-
Re-wired some built in speakers and used the Wave for opening boxes, unscrewing the cover plates and cutting the wires. For stripping the insulation of the wires a dedicated tool just works better, especially if you need to do it 20 times.

-
Good work guys [emoji106]
Sent fra min FRD-L09 via Tapatalk
-
And there it is, a spoon. Maybe could use handle still. Well that can be tricky for my skills.


Sent from my VIE-L09 using Tapatalk
-
Used the bottleopener on the squirt, a bit small but does the job [emoji106]

Sent fra min FRD-L09 via Tapatalk
-
Well some heavy fabric got sucked up into our lawn mower so I had to cut it and pull it out. Here are some pics


-
As you see from the above pics my Jeep's jack couldn't raise the mower high enough so I could get under the deck and see what all was going on so I configured a (somewhat safe) ramp

-
And as they used to say on Full House. Cut. It. Out!



-
And of course the trusty Rebar's serrated blade made quick work of the heavy foam and fabric

-
@_MattGyver_ said:
And of course the trusty Rebar's serrated blade made quick work of the heavy foam and fabric
I love the Rebar! That serrated blade has gotten me out of more jams than I can count.
-
And of course the trusty Rebar's serrated blade made quick work of the heavy foam and fabric

I love the Rebar! That serrated blade has gotten me out of more jams than I can count.
With some jobs a plain edge knife just wont cut it!
-
I got tired of getting poked in the leg with my can opener on my keychain. I saw a video on YouTube showing how to take care of the problem. I took apart an earbud and used the tiny magnet to hold my can opener closed when not in use




-
clever use effjay!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login