Gerber mp600 help
-
Magnetus- If it's no hassle, I wouldn't mind a couple more photos of your adaptor.
Still trying to work out I'll do mine. I have the correct socket though it looks slightly shorter than yours so unsure whether I will need to find a longer one. How big was the magnet you used, and how did you fix it in the socket? Also, how long is it from the top of the Phillips to the piece that sticks out? I think I want a socket long enough that the load is borne by that rather that the head alone...
It's hard to plan the piece without the tool itself yet, so probably better to hear from others who have done it already. Don't worry about replying if it an inconvenience.
Your thoughts, and/or anyone else's would be appreciated.
-
No probs. I will post some pics this weekend

-
Pics showing the bit holder on the philips shaft, and the magnet is a tiny disc (5mm x 2mm) that fits snugly - it remains there with no glue and provides a solid hold.




-
@magentus said:
Pics showing the bit holder on the philips shaft, and the magnet is a tiny disc (5mm x 2mm) that fits snugly - it remains there with no glue and provides a solid hold.God smurfit! I had that attachment for years in my toolbox, I couldn't find a use for it and threw it away few weeks ago!

-
Pics showing the bit holder on the philips shaft, and the magnet is a tiny disc (5mm x 2mm) that fits snugly - it remains there with no glue and provides a solid hold.
God smurfit! I had that attachment for years in my toolbox, I couldn't find a use for it and threw it away few weeks ago!


-
I've now got an MP600. Had it for a couple of days now and am pretty happy with it. There does seem to be a reasonable amount of play in the pliers when in the locked position, perhaps there is a way to tune this? I also will have to try and get the correct socket as the one I have currently is too large to fit on the Philips driver.

-
@JonPA18 said:
I've now got an MP600. Had it for a couple of days now and am pretty happy with it. There does seem to be a reasonable amount of play in the pliers when in the locked position, perhaps there is a way to tune this? I also will have to try and get the correct socket as the one I have currently is too large to fit on the Philips driver.If you are talking about the plier head wiggle when fully open and locked, that is normal.
More of a rattle really.
Nature of the beast..
Does not hinder the usage. -
The rattles and wiggles on the Mp tools are all part of their charm! They have low tolerances which means they don't get fouled up with grit, fluff etc and are easily cleaned. They're the AK47 of the multitool world. EAsy to strip down and maintai n and , if you so desire, easy to modify.

-
and if you rattle them in your hand shaking with rhythm, you can do a Flamenco dancing session with them as if they were *castañuelas *:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
