What did you just get?
-
Sorry, I didn’t take any pics, I was just sooo beat! Not from putting it together but still from transporting it here, then we also kinda had visitors, two dogs dropped by, but there was nobody with them, so we had to grab them and put them in the garage so they didn’t run off, the Mrs called the number on the tags and they finally came and got them all the way from a town over, funny part was they didn’t want to get into the owners vehicle..
Anyway here’s what we did get, something simple not fancy but not crappy, funny part on this one is I’ve never used those side burners, I’ve never had a use for one and always thought they were worthless, and look no burner. Yet I have that other charcoal grill and you have to take one of those chimneys stick paper under them and light them to get the charcoal to get going before you can use them, yet I find out you can just take the chimney and place it right over the side burner and they fit perfect to get them going.. go fig..
JR
-
A SOG Master Mechanic.
PPP or PP ? (they
maderelabelled both)PPP
-
Over a year and a half since my last new knife and over two and a half since my last knife purchase.
Definitely in withdrawal.
Fortunately I received these two amazing birthday gifts from a friend (and forum member):
BlackFox 3 in 1 Sharpening kit. Really it's a Spyderco Sharpmaker clone which I meant to try for ages. It is easy to use and works pretty god... plus it's a NEW TOY.
Higonokami - Been wanting one for ages, more as a novelty, but ended up loving it. I usually hate friction folders and carbon blades but this is so light and clean and simple, so very sharp and the blade has an amazing shape. Lover the little thing... far more than the Svord, Navajas and most of my Opies.
-
@Corwyn said:
Higonokami - Been wanting one for ages, more as a novelty, but ended up loving it. I usually hate friction folders and carbon blades but this is so light and clean and simple, so very sharp and the blade has an amazing shape. Lover the little thing... far more than the Svord, Navajas and most of my Opies.cool stuff! The Sharpmaker is nice but I've heard good things of the BlackFox and the Lansky TurnBox versions of it if you are really in a budget

And the Higonokami is also my favorite "traditional" design with carbon steel. I am a true fan of stainless and have very very few carbon blades, but this one combined with the ultra slim carry and long curved blade makes it also my favorite.
Mine was brought by my father from Japan, if you read the markings on yours you can get some info about who, where and when made it

I had to be helped with a friend of mine who speaks and studies Japanese though, it is a complex thing :ahhh
-
Glad to see you are back from the ER mate.
Loving your Higo... brass is great. Mine is blackened steel - nice but it does make my hands smell of steel when I use it.
I will ask a colleague of mine who knows Japanese what it says when she gets back next week. Although I have a pretty good guess:
It's exactly this writing so it's probably a Nagao SK5 model : https://www.workshopheaven.com/standard-higonokami-knife.html -
@Corwyn said:
Glad to see you are back from the ER mate.Loving your Higo... brass is great. Mine is blackened steel - nice but it does make my hands smell of steel when I use it.
I will ask a colleague of mine who knows Japanese what it says when she gets back next week. Although I have a pretty good guess:
It's exactly this writing so it's probably a Nagao SK5 model : https://www.workshopheaven.com/standard-higonokami-knife.htmlThanks yes I'm back and doing normally, just cleaning the wound every day

I see you too were impatient and did your homework and research before getting an "official" translation :DAs a side note, mine has the well known problem of the blade hitting the inside of the scales :ahhh, but I cut a bit of leather and glued into it and no more dulling or rolling of the edge, I recommend doing so if you plan to use it and it has this problem

-
Today I got this special package from SOG
When I received my warranty PAD
I was charged by customs £20 Or $26
Which I didn’t think was fair
And SOG didn’t think that was fair
The only way they could refund me was in dollars
Or we can send you the pocket version of the PAD
I said yes please I will be happy with the pocket version
But didn’t know what model MT they were talking about
I didn’t want to ask SOG as I thought it would
be a nice surprise when I get the packageSo after having a coffee and stopped shaking
I opened the package to be very surprised
With what I saw when I removed the brown paper
A very nice SOG Power Access, I wasn’t expecting that
SOG thank you very much for all your help



-

SOG are a nice company.
I might not be a huge fan of their products, but corporate-wise and customer-service-wise they seem to be the best in the bunch - only heard good stories about them.
-

SOG are a nice company.
I might not be a huge fan of their products, but corporate-wise and customer-service-wise they seem to be the best in the bunch - only heard good stories about them.
Yes I can’t fault SOG for their C/S

It’s just Q/C that needs to be worked on

agree! And congrats on your new tool,
now I have only one question left...what about its file? :D
-

SOG are a nice company.
I might not be a huge fan of their products, but corporate-wise and customer-service-wise they seem to be the best in the bunch - only heard good stories about them.
Yes I can’t fault SOG for their C/S

It’s just Q/C that needs to be worked on

agree! And congrats on your new tool,
now I have only one question left...what about its file? :D
That was the first thing I checked :D
The cut on the file seems a lot better
On the thin side of the file looks more like teeth
That could cut metal
As the file on the PAD looks more like scratched lines
And as they are the same file they
should be identical But this is not the case
:ahhh -

SOG are a nice company.
I might not be a huge fan of their products, but corporate-wise and customer-service-wise they seem to be the best in the bunch - only heard good stories about them.
Yes I can’t fault SOG for their C/S

It’s just Q/C that needs to be worked on

agree! And congrats on your new tool,
now I have only one question left...what about its file? :D
That was the first thing I checked :D
The cut on the file seems a lot better
On the thin side of the file looks more like teeth
That could cut metal
As the file on the PAD looks more like scratched lines
And as they are the same file they
should be identical But this is not the case
:ahhhwell 50% success then

-
Got a pic of what I got the other day, got to use it for the first time today having a little cook out on the freaking hottest day of the year so far, OMG was it nasty out! But it cooked good, never used the cast iron grills before only ever stainless steel, kinda interesting..
JR
-
This is part of my latest haul!
I couldn't pass the Swissbuck up at $15, so I snagged it! Scales are in good shape and it just needs cleaning, oiling, and sharpening.
The NewPow knife is one of those cheap and cheerful things, and it's surprisingly good. Watched some youtube reviews comparing it to the OUTU plier knife, and thought it might be worth my time, especially considering how little they cost on Amazon. And it was! The blade is sharp, the pliers are really nice, and the bit driver works better than I expected it to.
The green thing is a new old stock Schrade Century Stewart CN35. Victorinox supplied blanks to Schrade, Schrade did the final machining and sharpening work and stamped "Germany" on the blade. It's for all intents and purposes a Victorinox. (Even the scales swap over) REALLY strong back springs. And it was 13 bucks.
The Ruko is one of the China-made and oft-maligned Toolclip copies. But it's actually a pretty GOOD copy. And it has more tools. Plain blade, serrated blade/flat head/metal file, scissors, wood saw, caplifter/can opener tool, small flat t-handle and small phillips t-handle. It's sharp, it's machined well, the wire cutters work, it's comfortable in the hand, and it was $21. I did have to peen the rivet that holds the tools in place, to reduce the side-play in the tools. So it's not perfect. Machined well, assembled sloppily. The pliers were also tight at first, but they've loosened up nicely.
Charles.

-
A new home for my Quantum Mechanic, courtesy of Gohard...

More pics later, this is just an appetizer... ;)
Oh and Gohard, you da man! Thank you very much!

-
@AlephZero said:
A new home for my Quantum Mechanic, courtesy of Gohard...
More pics later, this is just an appetizer... ;)
Oh and Gohard, you da man! Thank you very much!


-
Oh and Mechy, I'll send your package tomorrow, promise

:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
