Access to Power -SOG 30-day Challenge! Starting June 1st! Access & Access Deluxe
-
Day 13:
Did a quick polish on a tea set. Didn't use the PAD for anything on the tea set. Just thought it would be a neat pic. :)
-
Day 14
Today I had to use the plain blade
To open this special package from SOGWhen I received my warranty PAD
I was charged by customs £20 Or $26
Which I didn’t think was fair
And SOG didn’t think that was fair
The only way they could refund me was in dollars
Or we can send you the pocket version of the PAD
I said yes please I will be happy with the pocket version
But didn’t know what model MT they were talking about
I didn’t want to ask SOG as I thought it would
be a nice surprise when I get the packageSo after having a coffee and stopped shaking
I opened the package to be very surprised
With what I saw when I removed the brown paper
A very nice SOG Power Access, I wasn’t expecting that
I straight away checked out all the tools and
everything works so I am very happy
SOG thank you very much for all your help




-
How nice! So now you get to complete **two **checklists >:D
-
That is some great customer service [emoji2]
Sent fra min FRD-L09 via Tapatalk
-
Day 14
Meanwhile, I know that throughout this challenge all of you have been itching to finally learn how long that cool LED light is that I keep in the PAD sheath's side loop.
After making a high-precision attempt, followed by some liberal extrapolation (the PAD's ruler is -just- too short) I conclude that the answer you have all been waiting for, is...
90 mm!
Stay tuned, and watch the next three episodes to learn:
- the light's length in inches (I have a cunning plan for this that I will not yet reveal)
- the light's diameter in mm
- the same in inches

-
I just checked the ruler on the PAD
And it goes to 23 cm as it
carries on to the other handle
Just no read out from 9cm to 14cm

-
That is awesome, W! I do like the regular PowerAcces. :)
Nice pics guys!
DT,
I would have cheated by marking a first set of measurements at a point and measuring again from there. It wouldn't be very accurate. But, accuracy is work and, I am a bit lazy. :P
Hats off to your being accurate.
-
Thanks GLBM

I like the SOG PA a lot
Even the file looks better :D

-
@gerleatherberman said:
That is awesome, W! I do like the regular PowerAcces. :)Nice pics guys!
DT,
I would have cheated by marking a first set of measurements at a point and measuring again from there. It wouldn't be very accurate. But, accuracy is work and, I am a bit lazy. :P
Hats off to your being accurate.
Thanks (I think :D)
Actually, the PAD's ruler seems pretty accurate (in points where it indicates anything, that is), I've just laid it along a real fixed ruler and the markings match.
-
Thanks GLBM

I like the SOG PA a lot
Even the file looks better :D

That file... could you transpose it to the PAD?
As far as I can see it’s exactly the same
file and so are the pivot side cutouts for the lock :D
-
The early PA had a mediocre file, but maybe they have remedied that.
The PA and PAD have the same tools (at least in terms of what is in the PA's smaller toolset. Ex. The PA has no saw...etc), except for the cutting blades, of which the PAD has longer cutting blades.
Thank you for cheking on the ruler, DT! It was a compliment calling you accurate.

W,
I forgot to mention! Congrats on getting the PA! That was excellent CS on SOG's part. :) -
@gerleatherberman said:
The early PA had a mediocre file, but maybe they have remedied that.W,
I forgot to mention! Congrats on getting the PA! That was excellent CS on SOG's part. :)Thanks GLBM

I can’t fault SOG for their C/S
It’s still the same file but the grooves seem slightly deeper
And the thin side of the file has been cut better
Should be able to remove metal
not like on the PAD where all I got are just scratched lines
-
Excellent.

Day 14:
Taking a break out in front of the store.
-
You guys have been busy while I've been away!

I'm sorry, but my file is still a piece of junk. I didn't test it against aluminum, but it barely notches a tin can and was useless trying to 'sharpen' the point of a nail. These are tasks that an actual file can do easily. But, nice work, WSpeed, demonstrating that aluminum is workable with the file. How that can be is a mystery, but it was good to see there is some use for the file.

I love the way you guys are engaged in testing the PAD!

-
Since I was gone and did not have cell phone access (woooo hooo!
), I must post some photos retrospectively.We had a great trip up to Glacier NP, Montana is looking nice and green after a long Winter. Just on the drive up we saw numerous deer, some elk, and lots of birds.

Day 07:
The first night we set up camp and I decided to do a little cooking. I used the much maligned file to break up a fire starter and, in conjunction with a ferro rod, throw some good sparks to start a fire:

The sharp-eyed reader will notice that I'm using charcoal briquets. I did this because I was going to cook in a Dutch oven, and briquets give a little more predictability.

This worked out really well, and we had......brownies! (Gotta keep Mrs Nix happy on camping trips.
)
-
Day 08:
Fun day. We did some hiking and nature gazing. The SOG's main blade was useful for opening a package of nuts, shaving some wood for the evening fire, and for peeling and slicing a cucumber for sandwiches. I only took a shot of the cucumber prep:

I will say that the main blade performed well for peeling and slicing, as well as shaving some fine curls of wood for fire making. I don't like the blade's shape and edge geometry, but I have to admit that it performed very well on this trip.

Cucumber on a camping trip? Yeah...... ;)....I have a nice cooler and I gotta keep Mrs Nix happy.....
Here's our little trailer that serves as base camp, notice how green the woods are!
A gratuitous shot from the lake we were able to hike to:

And from a little further down the lake shore.....

-
Day 09:
Another fun day, but the weather turned a bit.

We did see several animals in the park, including deer, elk, numerous ground squirrels, numerous birds, and a black bear. I was able to snap this shot of a yearling deer as we hiked through the woods:

She had a sister nearby, but I didn't get a shot.
I love the Jet Boil camp stoves. I take one everywhere. However, once in a while, I tightened the butane control knob too much. The knob is small and can be a bit difficult to open with fat fingers. The SOG pliers provided just the right leverage to crack it open one morning when brewing up some tea:

SOG awl awlso came in handy to poke a couple of vent holes in the water jug to let water flow out more easily:

Overall the SOG proven to be a useful tool in camp. I used it in several roles and it performed well. Even my odd use of the file was successful. I was car camping and the PAD's extra weight was no bother. I carried it either in a pocket or in it's sheath, attached to my day pack. Overall, a solid 'A' in meeting my camp needs.


-
Beautiful pictures, Nix! Looks like you had a lovely trip!

W tested his file on aluminum, but did you see the video where I used it successfully on door-hinge steel? The file actually worked fine(all three sides on mine) and it still feels smooth to the touch. One of those cases where our inherent senses can fail us. DT successfully tested the file on his as well.
I used a 60x-100x magnifier to look at my PAD file and found the actual texture interesting. It peaked my curiosity to the point I made the video. My hunch was verified. The file was mediocre, but leaps & bounds better than "practically useless".
I ranked it a bit less than 50% effective than the LM Rebar file. It has been established that the PAD/PA file is generally useful on harder materials (not fingernails).
You may want to contact SOG and see if they will send you a new file, as the rest of us(still in the challenge) have confirmed the file is actually usable, contrary to initial assumptions.
Another day 14: the PAD is showb with the magnifier I used on the file before recording my file experiment.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login