Access to Power -SOG 30-day Challenge! Starting June 1st! Access & Access Deluxe
-
@gerleatherberman said:
Again, and I cannot stress this enough, it seems you have a truly faulty file and should contact SOG about a replacement file before condemning the file altogether. That is my position on the matter. If you want to discredit a tool for its’ file, then please do so with a file example that is representative of what the rest of us have demonstrated.Would you do a review on a SAK with a bent corkscrew and write about the bent corkscrew as a common fault?
G-man,

I have acquiesced to your wishes and contacted SOG through their on-line email function @ their website. I have requested a replacement file blade.
Let me point out that not one person in this challenge has stated that his or her file is a good and useful file. Not one of us has been able to say "hey, I love this file feature on the PAD." I know you and Wspeed were able to get the files to work to some degree. So, this is not a one-time flaw, e.g. a bent corkscrew. This smurfy file seems to be, indeed, a "common flaw". Since Powernoodle and I are both appalled by the lame files, and everyone else seems to be at least concerned by the lame files, that would give us somewhere around a 100% dissatisfaction rate with the SOG file (I trust you guys will correct my math if I've misrepresented anyone's views on the file).
Now, if SOG gets back to me and sends me a working file, I will clearly state that I got a random dud and that the file performs at a better level than I had previously experienced. I have no problem admitting that I am wrong; I've had lots of practice. :D :-[
It will remain to be seen if such an improved file, should it exist, converts me from dissatisfied customer to satisfied customer.Part of the reason I decided to see if SOG can fix this issue (one of several issues for me), is that I realized that if it weren't for the challenges, I would probably just leave this mutlitool in a drawer or give it away (or perhaps just throw it away, I don't like to give away knives or tools that I don't like myself, that would indeed be 'passing the buck'.). So, before going to such extremes, it seems reasonable to see if SOG can amend this issue. In all candor, I doubt it, because it does seem like an inherent design issue.
Let's see what SOG says.

-
Now, this took a long time to achieve and I don't think I could actually get good edge with this tool, but it did do something, which is more than I expected. Perhaps **with enough time **it might serve the purpose.
this reminds me of
*
“If I had five minutes to chop down a tree, I’d spend the first three sharpening my axe.”*- Abraham Lincoln :D
@Nix said:
OK, I've been a bit negative about the SOG PAD recently, so I thought I'd share one feature that I think is very cool:The PAD can be 'flicked' open with a sharp snap of the wrist.
The momentum of one handle swings the pliers open, add a little rotation, and the pliers are in hand, ready to use. Nice! Especially handy when one is fishing. Hey, that reminds me, I need to go fishing.......
wait until you wrist flick it too enthusiastically and use our knuckles as a stop point :D then tell mw that aggain

The PAD might be too small and light enough to just cause discomfort, but I can tell from experience that a fully loaded Powerlock or Blacktip can leave a nasty cut and evn make you drop the tool :ahhhhow can you not be conscious of the force applied? ??? Well, if you have many SOG tools with different smoothness in opening and forget how smooth the one in your hand was

Gerber has the Mr.Pinchy's pinching, SOGs has the Power--- smashing

-
It will be interesting to see what SOG
Are going to do about the file Nix

-
Yup, that would interest me too...
Meanwhile, on Day 16, I'm afraid I haven't used the PAD for anything else than below, highly important, but
not very innovative operation. At least the cap lifter works well

-
Critical task completion!

-
Nix.
I do have to agree with you, in a close regard, Nix. The file is of sub-par quality and usefulness, <u>relative</u> to its' competition. It would only be "good", at least in my opinion, if it were of the same quality as the lower-end of its' competition(gerger for example). As it stands, while still useful to an extent(at least a few of them), it is at the bottom of the totem pole(sp?).
I hope SOG treats you as they should and sends you a proper replacement.If they can get these issues under control, they may be able to create a stupendous multitool. If they can do it with the PAD is questionable.
We'll have to wait and see I guess. :) -
Yes, I think you are right. There is a lot of potential here with the PAD.

-
I was feeling a little brave with the PAD and tried a medium prying task with the "chisel"(uhmm huh). I have been using it as a mid-large flat blade driver. I was surprised it didn't twist or anything under torsion. I twisted the board up with the blade after prying it up a bit. I was more worried in the end that it may break a pivot screw. But, everything went well. Lifted the oak board free of its' bond (nails holding it down). :ahhh
I probably won't push that particular implement that far again, but was happy to see the tool steel is pretty good.
And an extra pic of the PAD during a break. :)

-
Nice!

-
Day 11:
A cold and rainy day. Sounds miserable, but here in the dry, dry state of Montana, we'll take it!
Might have been a good day for Walleye fishing, but I chose to make mushroom soup instead. PAD got pressed into service to slice mushrooms. It did a great job with this task!


In addition to Button, smurfake, Crimini, and Black Trumpet mushrooms, I decided to throw in a can of organic mushrooms (Button variant, I think). Sure enough, the ring pull snapped off........

SOG PAD to the rescue!

The can opener both cut the lid and separated the lid at the designed score. Worked well to salvage a tricky situation.

This is why manual can openers will never be obsolete (in my lifetime ;) ).
-
Soup is up!

-
Looks delicious! It's a bit hot down here in AL for most soups, but mushroom soup is always enjoyable. :)
On a side note: I almost fell oit of my chair when I read where you mentioned shii-take(hyphenated to avoid curse filter) mushrooms. Smurfake.

-
Ha ha ha. I missed that.

Too funny. C'mon! It's a mushroom!
-
@gerleatherberman said:
Looks delicious! It's a bit hot down here in AL for most soups, but mushroom soup is always enjoyable. :)On a side note: I almost fell oit of my chair when I read where you mentioned shii-take(hyphenated to avoid curse filter) mushrooms. Smurfake.

+1 to the delicious - looks yummy! Smurfake is a magic ingredient out of a class of ingredients some of my countrymen use to amplify their mental activities :D

-
oops... double
-
Seems odd to have a fuse in the kettle plug. Probably a good idea, but I've never seen that before. Do all English appliances have fused plugs?
Good work with the chisel, sorry you need a new kettle!

Yes all UK plugs have a fuse

I think it’s a great idea
Same with Ireland, it allows for building houses with cheaper ring circuits instead of radial circuits.

-
@Nix said:
OK, I've been a bit negative about the SOG PAD recently, so I thought I'd share one feature that I think is very cool:The PAD can be 'flicked' open with a sharp snap of the wrist.
The momentum of one handle swings the pliers open, add a little rotation, and the pliers are in hand, ready to use. Nice! Especially handy when one is fishing. Hey, that reminds me, I need to go fishing.......
FYI, it should be possible to loosen and tighten the pivot screws to adjust the degree of flicky-ness.

Just in case anyone has a too loose or too tight PAD. -
Excellent looking mushroom soup Nix

-
Day 17
Today I am removing my old bike battery
As over the winter the battery stopped working completely
So I used the 1/4 inch driver with the adapter
and the largest cross head screw driver from the bit kitNo problems undoing the battery terminals
I really lik the PADs 1/4 inch driver and bits set
And it looks a nice quality toolNow I am waiting for the new battery to fully charge
Before I can fit it to the bike



-
Great use, Wspeed.
I had a bike's battery die on me whilst I was on a road trip. I was in a remote area and it was quite a bit of work to get back to a town where I could order a new battery. I was sure glad to havve a few tools with me that day!
Once a bike's battery gives up the will to spark, there is no bringing it back. :(
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login