Access to Power -SOG 30-day Challenge! Starting June 1st! Access & Access Deluxe
-
Nice shot, G-man.

I think the PAD is a nice looking tool with some personality and dash.
-
Thank you, Nix !

-
Excellent pic GLBM

-
Day 13 (continued):
After the discussion with G-man above, I decided to regrind the Can Opener. I used a mill file, diamond sharpener, and sandpaper to create more of an edge on the semicircular cutting edge. This is where the Can Opener does it's work. SOG sharpened (to a limited extent) the straight inner edge. This makes no sense as the inner edge isn't involved in opening a can (although it may be useful for peeling an orange.).
Between this and the file, I get the impression the tools were designed by somebody who had seen a picture of other tools, but has no idea how they are supposed to work. It's like the design is aping some dimly recollected tool set from a lost civilization. Hey, maybe that's where we are these days.

The new can opener now works fairly well. Maybe not SAK efficacy, but it is much improved over the can opener as received. In the photo, the point or tip of the opener looks rounded. This is misleading as the tip is actually pretty sharp. I like the new "shark's tooth" look of this opener now.
-
Thank you, W!
Very nice, Nix! Maybe, when you inevitably have to send it in for warranty work, SOG can reverse engineer your reprofiled can opener and use the ancient technology to create a more effective one.

-
@gerleatherberman said:
Very nice, Nix! Maybe, when you inevitably have to send it in for warranty work, SOG can reverse engineer your reprofiled can opener and use the ancient technology to create a more effective one.
That is so NOT funny.

(I actually had the same thought myself. )
-
Looks good Nix

Would love to see some pics of a can you used it on
-
So, SOG got back to me.......
Hello,
We are sending you a replacement clip for your Power Access multi tool.
Thank you,
AmandaWhy do I get the impression we've had a failure to communicate?

-
How many PA clips got broken where the automatic response is to send a new clip?
I am seriously LOL'ing here.
If you send a correction email in reply, and they still send you a clip, I am going to die laughing(sorry. I can't help it).
-
@Wspeed said:
Looks good Nix
Would love to see some pics of a can you used it on
Well, since you ride motorcycles and all, W,


The key thing here is that the Can Opener is now cutting the lid, not punching through it. As a result, the cutting is much smoother. Still, little 'bites' are required, but way less effort and the lid isn't getting smashed into the inside of the can.
-
@Nix said:
So, SOG got back to me.......Hello,
We are sending you a replacement clip for your Power Access multi tool.
Thank you,
AmandaWhy do I get the impression we've had a failure to communicate?
Speechless

Looks good Nix

Would love to see some pics of a can you used it on
Well, since you ride motorcycles and all, W,

The key thing here is that the Can Opener is now cutting the lid, not punching through it. As a result, the cutting is much smoother. Still, little 'bites' are required, but way less effort and the lid isn't getting smashed into the inside of the can.
Nice one Nix

Definitely worth doing than :D
-
@gerleatherberman said:
How many PA clips got broken where the automatic response is to send a new clip?
I am seriously LOL'ing here.
If you send a correction email in reply, and they still send you a clip, I am going to die laughing(sorry. I can't help it).

I have sent SOG (Amanda) a response email. I explained that the PAD doesn't have a clip and asked that they not send me a clip.
I also explained that the wire cutters don't cut fine wire and that the can opener was defective, but that I fixed the can opener issue with a file.
I'm expecting to get a 'replacement' Baton Q4 now. ::)
-
Before El P has a chance to chime in here, yes, I am perplexed and dismayed.....

-
so yes they Posted And Delivered a clip and an answer unrelated to your issues, but hey, I never have enough clips! (to mod other tools, add them to my clipless knives like Opinels or Kudus, etc.
)
But yes it's weird and you should write again to make sure they got your request and complain and can act accordingly
Let's give Amanda another chance to be either Pardoned,** A**ppraised, Derided or judged again, she might be new to the company and overloaded with customer emails :ahhhalso you did to your can('t) opener :) what I do with most of those found in Chinese, cheap and ugly tools, this way they can also double as useful scrapers, gougers or even package openers

hopefully if enough complaints, recommendations and customer reviews show them how a can opener and a file should be made, ::) they will Pause And Decide to improve these implements on the next run, or batch of tools.
It is true that SOG does take its time to** P**rogress, Advance, Develop and improve their tools but I expect them to do so with their next multitool releases, as they *do *listen to their public most times in my opinion -
Day 19
Today I used the Awl to make a hole in my leather belt
No problems using the Awl, made the hole quickly


-
Nice one, W!
The awl is one of the things about the PAD that is an improvement over their older models. IMO of course. :) -
Nice use, W!

-
Thanks GLBM and Nix

I like the Awl on the PAD more than the SAK Awl

-
Day 14:
It has been unusually cold and rainy here for the past few days. Mrs Nix requested a hot lunch, which seemed like a good idea. I had a fresh baguette and, after a quick rummage through the refrigerator, came up with the idea of pizza sandwiches. What's not to love?
I used the PAD's main blade to peel some garlic and the can-opener to open a tin of tomato sauce. This is the exact same can and sauce that I used for my first can-opening attempt. You know, the one where as much sauce ended up on the lid as was left tin the can.
So, how would my modified can-opener fare this attempt?
Spoiler:

Hey very nice! The can lid got cut in small increments and the lid didn't get mashed into the sauce.


I particularly enjoyed not splattering tomato sauce all over my shirt. Feels like a real improvement. Consider this opener tested, improved, and tested.

I made up a pizza sauce, toasted the baguettes, and assembled the sandwiches. After a quick broil in the oven, lunch was ready, courtesy of the SOG PAD (don't open the spoiler if you are hungry or particular about the treatment of baguettes.):
Spoiler:

Mrs Nix loved her lunch!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login