Need help finding an older disco'd model...
-
Why not just buy a First Mate instead of using a Swissbianco as mod fodder?
Sent from my SM-P900 using Tapatalk
-
@AndyTiedye said:
Why not just buy a First Mate instead of using a Swissbianco as mod fodder?Sent from my SM-P900 using Tapatalk
The First Mate still needs the awl and if I am going to add that layer, I might as well add a can opener since I will have an empty end.
The can opener I am indifferent about, but I have no want for a corkscrew, or most of the back side tools, even though I can see the usefulness of the Phillips head.
SAKs themselves have always held a place in my mind as being everything you need it nothing you do not. For me, that particular knife is the Professional 4 layer. Since I can't find one (and the new generation saws work better), I would prefer to make my user from modern parts. I would like to have an original, but if I had to choose between an original or a modern version, I would take the modern as a user.
-
Don't assume that Syph will sell parts individually.
-
@NJBillK said:
The First Mate still needs the awl and if I am going to add that layerThe marlinspike on the First Mate is often pointy enough to act as an awl. If not you could always sharpen it a bit. The thing you may then be missing is a reamer I guess, but you didn't mention it...
Also, I would tend to disagree on the "everything you need with nothing you don't" definition. In terms of carried SAK I've almost always had more than I needed, or than I thought I needed... until an unexpected situation came along which required me to get creative with what I had and use that one tool I always thought was useless. For me SAKs are "Everything you need plus everything you didn't know you were going to need" but I'm very much a "just in case" kind of guy so that maybe why I look at it like that :D
For example I've never used the can opener as a can opener. Always thought it was ridiculous to have that on a SAK but its tip works great as a Philips screwdriver in a pinch (on the Victorinox can opener at least).
I understand your search for the "perfect" SAK though and wish you the best of luck in your search for a collector NiB 4 Layers Professional. The tricky part is that lots of people don't label SAKs right when selling them second-hand.
I would offer to try and find one for you in Switzerland but I've been snatching all the Wenger Professional models I could find for myself. And there's not that many around...Welcome to the MTo btw

-
The First Mate still needs the awl and if I am going to add that layer
The marlinspike on the First Mate is often pointy enough to act as an awl. If not you could always sharpen it a bit. The thing you may then be missing is a reamer I guess, but you didn't mention it...
Also, I would tend to disagree on the "everything you need with nothing you don't" definition. In terms of carried SAK I've almost always had more than I needed, or than I thought I needed... until an unexpected situation came along which required me to get creative with what I had and use that one tool I always thought was useless. For me SAKs are "Everything you need plus everything you didn't know you were going to need" but I'm very much a "just in case" kind of guy so that maybe why I look at it like that :D
For example I've never used the can opener as a can opener. Always thought it was ridiculous to have that on a SAK but its tip works great as a Philips screwdriver in a pinch (on the Victorinox can opener at least).
I understand your search for the "perfect" SAK though and wish you the best of luck in your search for a collector NiB 4 Layers Professional. The tricky part is that lots of people don't label SAKs right when selling them second-hand.
I would offer to try and find one for you in Switzerland but I've been snatching all the Wenger Professional models I could find for myself. And there's not that many around...Welcome to the MTo btw

Thank you for the warm welcome.
I appreciate the offer, and I haven't been able to pin down whether this model was a world wide release or European release... I have only seen two in the wild, and both of the gentlemen who owned them were from Germany.
I do not seek a NiB only, I wouldn't mind if it was a user, that just means it may see occasional carry, but not steady use.
I do like the reamer aspect of the awl, and for rope/line work, I would rather not have a sharpened edge to the Marlin Spike (this was a concern of mine with the Ti Custom from Syph), though that is easy enough to fix with some sandpaper and a leather backer.
If you would keep an eye out for a user that doesn't pass your muster,I would love to acquire one.
Thank you again.
-
@NJBillK said:
I am sure I could figure out the layer count that I would want, and order the Sacking needle, spring scales, and correct screw/hardware length from Syph.@hiraethus said:
Don't assume that Syph will sell parts individually.Indeed. Modding SAKs is Syph´s way of making a living.
He might sell you a part if you ask him nicely but if you want the whole shebang why don´t you let him do the mod. -
@Ron Who said:
Don't assume that Syph will sell parts individually.
Indeed. Modding SAKs is Syph´s way of making a living.
He might sell you a part if you ask him nicely but if you want the whole shebang why don´t you let him do the mod.I can understand this, but my way of thinking is based in the amount of dollars for effort put in.
While I do know that he does this for a profit, that leads me to believe that he wouldn't mind sticking a few quick bucks in his pocket just for packaging up some parts and mailing them. Knowing his work, I would think that he has a few knives on his plate at any given time. Due to this, and the fact that time is the one item that can't be replaced or earned, selling parts should be an easy way for most folks to make a few bucks the easy way.
Thank you both for your input and concern. I hope it does work out. If it doesn't, then I really haven't lost anything, I just haven't gained anything either... This would leave me in the same spot that I was in prior to learning of his parts.
As for why not have him do all of the work? I enjoy working on my knives. I can do it, and I have the want to do so.
-
Keep in mind that the parts that syph makes have larger than normal pivot holes in order to be compatible with the screws he uses to hold the knives together.
-
@Don Pablo said:
Keep in mind that the parts that syph makes have larger than normal pivot holes in order to be compatible with the screws he uses to hold the knives together.I understand this, I have been following his work and builds on Bladeforums for quite some time. I have been contemplating a screw based conversion for my build for a while now and he was one of the first folks that I bounced the idea off of, knowing that he does it regularly.
-
The way I do it is that in my pocket, I have a standard size SAK (91mm) plus an old Case rigging knife on my belt in a pouch (about five inches closed). That way I have a big blade for cutting heavier material, as well as a spike that gets knots out of most rope. In my experience, the awl and corkscrew can get it done, some lines I've got knots out with the Phillips.
Currently, 1950s era Italian issue knives are super cheap right now from various surplus places if you want that type.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login