Access to Power -SOG 30-day Challenge! Starting June 1st! Access & Access Deluxe
-
Could be, but SOG doesn't appear to have the same level of confidence as you do.
Or....it's just easier to send me a different tool.

-
Difficult decision Nix
??? :ahhh
I would look at what tools You use more on a MT
Has the Powerlock got the tools you need
Or do you think the PAD is more useful
If you want to stay with the PAD than
I would go for a replacement from SOG
-
@Nix said:
Could be, but SOG doesn't appear to have the same level of confidence as you do.Or....it's just easier to send me a different tool.

To me their email says we know that the PAD has bad tools
And we can’t be bothered to make better quality tools
But as you complained about the quality of the tools
We don’t really want to send you a replacement
As it will still have the same bad tools
So we rather send you a more expensive model
To hopefully get you off our back and stop complaining
-
Odd thing here is that I think the Powerlock is less expensive. Go figure.
-
If you have a model of MT that you would prefer
Why not ask SOG if they can send you one
As they are trying to send you a different model
Rather than replace the PAD
-
@Wspeed said:
I would look at what tools You use more on a MT.
Has the Powerlock got the tools you need?Good questions, W.
I liked the PAD for the hex-bit holder/driver and the 1/4" driver.
The Powerlock does have a 1/4" driver.
I could always get a 1/4" hex-bit adapter and select the bits I'd be most likely to need.Both tools have pliers, a knife (not a fan of the Powerlock's 'combo' blade), cap lifter/driver, can opener/driver, awl (again, PAD seems to have a better awl), saw, and file.
The file on the Powerlock does look like it works (but testing is believing).
I'm not a fan of serrated blades, so that's no loss for me.
The PAD's jewler's driver (now that I've tuned it a bit) seems like it could come in handy, but I don't know that I need it.The Powerlock's folding tool covers seem silly, but it sounds like some people do like them.
Still mulling..........
-
Hmmm... difficult...
Meanwhile on Day 19, today was very busy, so no tests. Beauty shot only, again.

-
Sad news, my brother MTo'ers.....
I have decide to trade in my SOG PAD for a SOG Powerlock.
In discussions with Amanda, she has convinced me that the Powerlock has a better track record and is the better mutlitool. I have to say that Amanda seems to have good sense, experience, and a deft touch on the pulse of SOG. I sincerely hope that SOG is listening to Amanda and her observations. If I could, I'd take her to lunch and pick her her brain. (Hey, maybe I will. I'll ask her if she'll go to lunch with me.)
At this point, I am formally withdrawing from the PAD challenge. I'm sorry to say that I do feel a sense of relief with this decision.
Look for my review of the SOG Powerlock in the future, "somewhere down the Crazy River". I hope you all continue to have fun with the PAD challenge. I hope the mods award you a nice badge. Lord knows, I think you deserve it.

-
I hope you have better luck with the Powerlock Nix

It’s a shame you have to stop the challenge
Look forward to see your new Powerlock
when you get it
-
Well, the 'T's' aren't dotted and the 'I's' aren't crossed, so we'll see how it awl evolves.

-
Nix,
I would probably do the same if I were in your shoes. But, I already have six PowerLocks (different generations). Don't need or want another.
I think the PowerLock is superior to the PAD in many respects. The only qualm I have with PowerLocks is that the tools don't lock up tight. But, to be honest, they really don't need to. The lock bar is situated in a way that keeps the lock bar from disengaging. The awl isn't very good though. The file works fine, but the cut area is short compared to the competition.The basic PowerLock is about $48 on amazon. But, you might look around and see if you like a more expensive PowerLock model and request it. I have the one with one plain blade and one serrated blade. Some versions of the PowerLock are more expensive than the PAD. Depends on the toolset.
I'll be watching for your PowerLock thread, Nix. And will be wishing your PAD experience had gone better.

-
Day 19:
Used the can opener driver to put the old turn-switch onto a new wire.
-
well Nix, good luck oth the PL
I would've done the same, the PL is a beast, well built (Chinese and USA made both) and most importantly a *proven and tested design * 
it's not the best at anything (well, pliers action and strength is debatable) but is very good in most things, especially if you don't have very specific needs such as OHO blades, bit exchangers etc. (though the 1/4" implement works fine)
also advantageous is the fact that they are incredibly easy to mod to change what you don't like and add what you prefer

I put LM scissors, Phillips, can opener and other tools' saw in it, it's also a very fun tool to play with and open and close like a butterfly

Spoiler:


Enjoy it!! Look at the different versions and choose the best one if they let you, there are interesting variations
but don't get carried away too much and ask for a TiNi Gold Plated LE Powerlock
:DPS: the pizza invention looked delicious, you outdid yourself this time in the Kitchen!!!

-
I think I'm getting a standard Powerlock, which is just fine by me. I'm definitely interested in comparing/looking at this multitool.
Cool mods there, El P!
I like the scissors idea. -
The standard PL is a tool that has been appreciated, with only minor changes, since 1998. They did add gear covers (ear looking things) and slimmed down the profile on the newest variants ( the 2.0). Don't know if they'll send a slimmed down model, but the standard chasis is a great too. The covers can be removed in a second (like TP has done) if they are annoying. And there are some ways of selecting the tool you need without having to open the tool all the way up to open a cover to select a tool.
-
Day 20
Day 20 already

So for today I opened a bottle of WKD for the missus
To celebrate only 10 days of the challenge left
Again no problems using the bottle opener




-

Looks refreshing.
-
+1!
Experience tells me that implement works well ;)Sorry to read you're exchanging tools and leaving the challenge Nix, it was fun to have you in...
My Day 20 saw the PAD in a symbolic assistant gardener role.

-
Nice pic D_T

You must be a pro at opening bottles by now :D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login