Noa's fixed blade challenge
-
I need to correct myself on the "emmerson" clone;
That grip is diffrent. I remember looking it up years ago and thinking it was a dead ringer for one of the comanders varients, now I look them up again and nothing looks the same.
Of course its too late to edit again.

-
Day17
The RCF is just decoration.
What we are really looking at is the guts of that OTFSo the locks and their springs are fine.
The drive springs are still on the yoke and plate assembly.
And the tang pins look fine
It looks like the front yoke is worn & damaged(pic3+4), but when re-assembled it works again.
In the end the assembly screws loosend up enough to where the dammaged front yoke wasnt engaging. This is a known issue on cheap OTFs since the screws wear on the zinc/potmetal frames till they strip out over time.
These DAs are all about ballance so everything was off.



-
wow! I didn't expect such a long and thorough reply, thanks Noa! The autos seem cheap especially camo one :D when you've had enough knives just by looks you review them sometimes

The Tac Force, well, it's a Tac Force
the Emerson has the famous 50/50 blade but the handle is a dead giveaway regarding its authenticity :ahhh
-
Day18
Today's EDC
There is more little hidden stuff but I'm only unpacking the main gear.
You also see my range bag and the background is a shirt from my regular range.Because I know someone's probably going to ask: That double Maxpedition pouch is not a tc7 or similar double pouch that they make but rather a TC1 and TC2 laced together using the pals loops on the sides and some paracord. I prefer this setup because Maxpedition larger pouches only have one belt loop by doing this I get two to distribute the weight better. Also I can have the hanger loops stradle a belt loop on my pants so they dont shift.

-
cool gear!!!

-
Day19
Got nothing.
So I tried something I knew wouldnt work. There is a reason boot knives are 4in or less NOT 7in.This is ridiculous.

Okay that lasted all of 10 minutes


-

Nice try. -
Yep
I could feel the tip resting on the sole next to my heal and there is still that much hanging out.
Cant
Bend
Ankle
:D -
Hey, you had to try right? :D
-
Day20
Mail Call!!
So did we get today? . T-Shirts!!
Any of you familiar with most YouTube channels know about channel merch
These shirts are from Demolition Ranch/Off the Ranch channels


-
More great pocs Noa
I once again havent been checking this thread as I had intended

Seems to me that there are several challenge threads that I haven't participated in as i should

I will be glad when this job calms down in a while and I can forum better

-
Day21
Work and errands have me running around in circles so much I haven't gotten a chance to take a decent photo.
So I was thinking about what to snap real quick and I remembered that $2 bait knife that my wife tried to open the paint can with... you remember that bent tip right?
Well that knife found a new home immediately after. And here it is packed in with all the cheap Harbor Freight tools that make up my car kit. Now I use generic tools in car tool kits for the simple reason that having had a car broken into before I feel everything left in a car should be considered disposable. That way if it's stolen or your loan it out and it walks off it's not a big deal.
-
@Noa Isumi said:
Day21
Work and errands have me running around in circles so much I haven't gotten a chance to take a decent photo.
So I was thinking about what to snap real quick and I remembered that $2 bait knife that my wife tried to open the paint can with... you remember that bent tip right?
Well that knife found a new home immediately after. And here it is packed in with all the cheap Harbor Freight tools that make up my car kit. Now I use generic tools in car tool kits for the simple reason that having had a car broken into before I feel everything left in a car should be considered disposable. That way if it's stolen or your loan it out and it walks off it's not a big deal.wise move and clever thinking about the car

and God do I know those cheap Bait knives (the orange one)... :D
Spoiler:

-
Day22
I was out and about came across some crushed concrete and thought it would make a good shot
-
Day23 sort of
Ok its 4:17am so technicaly this is D23 even though I am still up from D22Minor misshap. A giant can of Monster detonated in my EDC bag. I just got done cleaning the contents, but the bag is still soaked. Any tips for cleaning a canvas and leather rucksack? I am planing on delicate cycle w/ just washing soda then sun dry this afternoon.(its texas summer the only way it wont dry is if it rains)
So my pack will be out of comission for a couple of days. So time for a new(old) bag. My wife hates murses so she will hate this when she sees it. All my stuff, munchies included, is now in a 1968 Czechoslovakian Army bread bag. I had actualy gotten this as a new muzzle loaging bag, but never got around to swaping out the East German AK mag pouch I was using.
The one catch here is the Glock81 is longer than the bag so the RCF will be my EDC bag knife till I switch back.Ps
I am not one to actualy carry a bag around town. I never got the whole murse thing that is so common today. I do carry a pack when at the mall but it starts out empty. My EDC bag goes from the house to the car, to job, back to car, house, repeate, over and over, you get the idea. It isnt always on me but it is usualy nearby.

-
Day23 continued
Since I had to wash the Glock and it was sitting on the kitchen counter I decide to prep today's salad with it. Who says you can't do fine cutting with a bayonets and army knives... just look at them see through cucumbers.

-
Day24
I figured since there is another thread about the uses of a hawkbill blade that I would show off one of mine.
This is an Aranyk mini-billhook pictured next to my RCF and ST300 for size.
I have used this knife mainly for light wood working and as a curved drawshave/scraper by gripping the handle and hump on the back of the blade.
It doesnt get used often but when it does is handy for whatever special tasks I give it
-
@Noa Isumi said:
Day24
I figured since there is another thread about the uses of a hawkbill blade that I would show off one of mine.
This is an Aranyk mini-billhook pictured next to my RCF and ST300 for size.
I have used this knife mainly for light wood working and as a curved drawshave/scraper by gripping the handle and hump on the back of the blade.
It doesnt get used often but when it does is handy for whatever special tasks I give itthat is a velociraptor claw! :ahhh :ahhh

-
Now that's a knife

-
Day25
What would one of my challenges be without cutting some cardboard.
All right so we changed the cardstock at work to where now it is almost paper thin... that's no fun.
Pic1Let's do a single push on a single piece of corrugated across the corrugations "grain".
Standing on the edge; even pressure strait down; stopping when it starts to curl.
That a good 8-10in in one cut
( didn't think to actually measure it)
Pic2Edit
It was still in the trash pile so I got to take it yard stick to it (20-10 10 1/2) that's a 9 1/2 inch cut
Pic3


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
