Access to Power -SOG 30-day Challenge! Starting June 1st! Access & Access Deluxe
-
Day 23
I was having my first cup of coffee this morning
Outside on our bench When I noticed that the seat was brokenI measured the seat with the PAD at 45mm
So I found some screws at 35mm
And used the 1/4 driver with the adapter and Philips bit
To fix the bench seatI started with the 1/4 driver at 180 degrees
Which worked fine for the first part
But as I screwed in the last bit I had to use
The 1/4 driver at 90 degrees as I found
That the handles were twisting past each other
on hard to fit or remove screwsOverall it did the job well





-
Nice use, W!

-
Day 23
"Hullo, Master Human. Pray forgive me... but I could fain fail to notice that thou art in possession of a fine tool. Wouldst thou find it in thy heart to divulge whither thou hast acquired it?"

-
Good job on testing the durability, W! I have found the bit driver, being outboard on the PAD, makes it almost perfect for tough work.

@Dutch_Tooler said:
Day 23"Hullo, Master Human. Pray forgive me... but I could fain fail to notice that thou art in possession of a fine tool. Wouldst thou find it in thy heart to divulge whither thou hast acquired it?"
1 vote for best challenge pic.

-
PAD gets a day off, as I am attending a wedding this evening. :)
Day 23: Just sitting on the car seat after a 200 mile drive.
-
Love the sheep snap, D_T!

Enjoy the wedding, G-man!

-
Day 23
"Hullo, Master Human. Pray forgive me... but I could fain fail to notice that thou art in possession of a fine tool. Wouldst thou find it in thy heart to divulge whither thou hast acquired it?"
1 vote for best challenge pic.

Thanks

@gerleatherberman said:
PAD gets a day off, as I am attending a wedding this evening. :)
Day 23: Just sitting on the car seat after a 200 mile drive.That is a cool pic

-
Cool pics D_T and GLBM

-
Thank you Nix, D_T, and W!

-
Day 23
"Hullo, Master Human. Pray forgive me... but I could fain fail to notice that thou art in possession of a fine tool. Wouldst thou find it in thy heart to divulge whither thou hast acquired it?"
1 vote for best challenge pic.

+2!

-
Day 23
"Hullo, Master Human. Pray forgive me... but I could fain fail to notice that thou art in possession of a fine tool. Wouldst thou find it in thy heart to divulge whither thou hast acquired it?"
1 vote for best challenge pic.

+2!

+3

-
Day 24
Not much going on today
So I helped with cutting cucumber
And opening a tin of hotdogsI was surprised that the PE blade is still nice and sharp
And was able to cut thin slices of cucumberUsing the can opener was easier
as the lid on the tin seems thinner
No problems to report :D





-
Nice work , W!

-
Thanks Nix

Did you do anymore peening on those scissors
-
Nice work, W! Looks like a little practice has made opening that can a bit easier. :)
-
W, couldn't resist giving them another tap or two.
But time and use will tell me more..... 
-
Day 23
"Hullo, Master Human. Pray forgive me... but I could fain fail to notice that thou art in possession of a fine tool. Wouldst thou find it in thy heart to divulge whither thou hast acquired it?"
1 vote for best challenge pic.

+2!

+3

+4! :D
-
My first real contribution. ::)
Filed some soft plastic... I compared the PA file with the Victorinox SAK file, the older version before the current stainless steel version. The SAK that this file is on is a used 90’s/early 00’s swisschamp (I think the file was fairly unused prior to acquisition)
When sawing through the soft (but thick-ish) plastic, the SAK file was about twice as fast, but at the expense of needing a good technique and hold on the piece to prevent “catching” if you know what I mean. Kinda like sawing wood.
When filing the plastic on the side of the files to smoothen the edges... I thought that the PA file felt just as aggressive on the crosshatch side as the SAK on the aggressive side.
But the SAK file has more area and no giant hole in it, so... :DNeeds testing on different materials.
-
@gerleatherberman said:
Nice work, W! Looks like a little practice has made opening that can a bit easier. :)It was easier to use the can opener :D
But the metal on the tin is a bit thinner
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login