Access to Power -SOG 30-day Challenge! Starting June 1st! Access & Access Deluxe
-
Day 26
Today I started working on my bike
To get it ready for a MOT
So I have to put the road legal number
plate back on with the required reflectorI used the medium driver on the bottle opener
To hold the screws while undoing the
nuts on the back of the bracketNo problems with using the medium driver





-
Nice use.
So......after the inspection the smaller plate gets put back on?

-
Of course

Day 26
Wanted to check the remaining charge on a battery, only to discover that the voltage tester had trouble with its own battery
. The battery cover was secured with a small Phillips into which the small screwdriver just about fit perfectly. Not in the picture, the ensuing crimping of the 9V battery attachment with the PAD's pliers after which the battery and cover were replaced and measurements could proceed.
-
And the pandas don't mind the non-MOT plate while you are on the road (presumably not speeding
)? -
@Nix said:
And the pandas don't mind the non-MOT plate while you are on the road (presumably not speeding
)?Most traffic police are ok
It’s that small percentage that gives you trouble
Most of the time that I have been stopped
is for a talk about speeding on their road
Not that I was speeding
As he or she don’t want to be dealing with
accidents or deaths again through speeding
-
Nice work, W. I watch a lot of car shows, so I have a small idea about what a pill an MOT cert can be. :ahhh
Day 26:

-
Thanks GLBM

-
Day 27
Today I am still finishing working on my bike
And I nearly forgot to fit the silencer tube to the exhaust
I used the integral bit holder on the PAD
with a Allen key bit from a different bit kit to fit the tubeNo real problems
But could only do small turns as
the Allen bolt hasn’t got much space on the exhaust
The 1/4” driver with the adapter would of worked better
but I had to try :D


-
Day 27
Comparison shot of the PAD with a contestant in the next announced challenge, my Rebar VX.

-
@Dutch_Tooler said:
Day 27Comparison shot of the PAD with a contestant in the next announced challenge, my Rebar VX.
cool pair!!

-
What is a Rebar VX...? :ahhh
(And, do I *need *one?)
-
Nice!

Day 27: Had to run a wire through the wall. Used the pad to cut the wire. The SOG jaw cutter portion makes one cut on 16-3 like a hot knife through butter.


-
Nice one GLBM

-
@Dutch_Tooler said:
...honesty demands I point out that the VX does not have a cap lifter, as I just rediscovered

You are soooooo going to fail the next challenge.....

-
You are running out of time...... :ahhh
-
...honesty demands I point out that the VX does not have a cap lifter, as I just rediscovered


You are soooooo going to fail the next challenge.....

Ponch once told me of a trick I might try...

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
