Skip to content
  • Categories
  • Recent
  • Popular
  • World
Skins
  • Light
  • Dark

Collapse

NodeBB

Rescue Knives vs. Belt

Scheduled Pinned Locked Moved Rescue Tools
65 Posts 1 Posters 28.6k Views
  • Oldest to Newest
  • Newest to Oldest
  • Most Votes
Reply
  • Reply as topic
Log in to reply
This topic has been deleted. Only users with topic management privileges can see it.
  • EtherealicerE
    EtherealicerE
    Etherealicer
    Admin Team
    wrote on last edited by Etherealicer
    #1

    So I got a new (very pretty) resuce knife, that sadly does not seem to cut that well. So, I decided to make a cutting test.
    The challenge was to test how easily the knives/hookes would cut through a 25mm wide belt. The belt is quite old and has faded from black to grey.
    Just to be clear, his is a test on how well the individual tools cut that belt, nothing more.

    FAIL

    Leatherman Signal Serrated Blade
    That came really unexpected and shocked me. I tried several times and every time, I got stuck. Somehow, the teeth of the serration don't work on that material. Never would have guessed that this is even possible.
    I was able to cut the belt with the short plain edge though.
    On the picture you can see the cut, the PE part made, close to the blade, the damage to the belt was made by the serrated part.
    On the 2nd picture you can see the serrated part of the blade vs some newspaper and it cuts reasonably well (serrated edges don't give as clean cuts as straight ones).

    Leatherman Mut Cutting Hook
    That one was the worst but hardly as surprising or disappointing as the Signal. Very awkward to use and hardly managed to damage the belt.
    Sidenote: the blade worked reasonably well, performin in the same league as the Wave serrated blade.

    Gerber Hinderer Rescue Knife Hook
    Despite my best effords I was not able to cut the belt. I got half way through, not enough... poor performance for a Rescue knife.

    Böker Cop Tool Serrated Blade
    See here

    signal.jpg

    signal_paper.jpg

    mut.jpg

    hinderer_hook.jpg

    1 Reply Last reply
    0
    • EtherealicerE
      EtherealicerE
      Etherealicer
      Admin Team
      wrote on last edited by
      #2

      PASS, but barely

      Edelried Rescue Canyoning Knife
      Love the design, looks well made, but out of the box it looked dull. A quick test confirmed it, that is why I started this.
      It barely managed to cut the belt and it required a tremendous amount of strength, for me clearly performing below expectations for a rescue knife.
      Will try to sharpen that knife, but I'm very dissapointed by that.

      edelried.jpg

      1 Reply Last reply
      0
      • NixN
        NixN
        Nix
        wrote on last edited by
        #3

        Nice testing, E! :like:

        1 Reply Last reply
        0
        • EtherealicerE
          EtherealicerE
          Etherealicer
          Admin Team
          wrote on last edited by Etherealicer
          #4

          PASS

          Gerber Bullrush Hook
          First hook to pass, did fairly well by ranking just below the LM Wave blade. I tested this after the Gerber Hinderer Rescue and was really surprised how much better that hook is.

          Charge Rescue Hook
          See here

          Wave Serrated Blade (and Mut semi-serrated blade)
          Barely used but also never sharpened it did cut well and the cut was fairly clean. Still, I feel it performed below expectation.

          Gerber Hinderer Rescue Serrated Blade
          Well, at least the blade is not a complete waste. But considering the size of the blade, still below expectation.

          Fox ERT Rescue Knife
          A massive knife with a massive (fat, 5mm at the spine) blade. Like the Hinderer rescue performance was below expectation.

          bullrush.jpg

          wave.jpg

          hinderer_blade.jpg

          fox_blade.jpg

          1 Reply Last reply
          0
          • EtherealicerE
            EtherealicerE
            Etherealicer
            Admin Team
            wrote on last edited by Etherealicer
            #5

            PASS, CUM LAUDE

            Wenger Mike Horn Serrated Blade
            That was easy. I would have guessed this knife would make the top 3, but it didn't.

            Victorinox Spirit Butterblade
            A good deal smaller than the Mike Horn blade, yet worked even better.

            Benchmade Mini-Griptillian
            That one was in my pocket, so I thought why not. PE blade that needs soon to be sharpened again did perform way above my expectations. Smooth cut, very easy... who needs serrations.
            I would like to add here, that the smoothness of the cut did not factor in. I rated the knifes purely on how easy the cut felt.

            Spyderco Dragonfly II H1 Serrated
            Tiny knife, but it does cut like crazy. I so do hope they make a serrated sheepfoot blade of this some day.

            Böker Cop Tool Hook
            See here

            mikehorn.jpg

            butterblade.jpg

            benchmade.jpg

            dragonfly.jpg

            1 Reply Last reply
            0
            • EtherealicerE
              EtherealicerE
              Etherealicer
              Admin Team
              wrote on last edited by
              #6

              PASS, MAGNA CUM LAUDE

              Fox ERT Rescue Hook
              Never would have guessed that a hook would make it that high up and that it would outperform its twin. Basically, this is how a hook should work, buttersmooth cutting. Not sure how practicable that hook is in reality with that prybar tip. But in this test it worked really well.

              fox_hook.jpg

              1 Reply Last reply
              0
              • EtherealicerE
                EtherealicerE
                Etherealicer
                Admin Team
                wrote on last edited by
                #7

                PASS, SUMMA CUM LAUDE

                #2 Victorinox Rescue Tool & Victorinox Hunter XT Gutting Blade
                This is how a rescue blade should cut, no efford required.

                #1 Spyderco Clipit Rescue
                After the stellar performance of the Dragonfly II, I was not surprised that its bigger brother surpassed every other blade I have.

                This was a close call.
                Pure cutting performance the Spyderco has a slight edge over the Vics. Locking is clearly also a bonus (though the Hunter has that too). The Spyderco has by far the widest blade with the bluntest tip, which could be problematic when having to get under a belt. I think the tip of the Rescue Tool would work best (I will try to make a test for that)

                hunter.jpg

                vic_rescue.jpg

                spyderco_rescue.jpg

                1 Reply Last reply
                0
                • EtherealicerE
                  EtherealicerE
                  Etherealicer
                  Admin Team
                  wrote on last edited by
                  #8

                  @Nix said:
                  Nice testing, E! :like:

                  :salute:

                  1 Reply Last reply
                  0
                  • SteveCS
                    SteveCS
                    SteveC
                    Global Moderators
                    wrote on last edited by
                    #9

                    Good job on the comparisons ! :tu:

                    1 Reply Last reply
                    0
                    • EtherealicerE
                      EtherealicerE
                      Etherealicer
                      Admin Team
                      wrote on last edited by
                      #10

                      Forgot one

                      Böker Cop Tool Serrated Blade - FAIL
                      The short blade was only capable of cutting 2/3 of the belt in a single cut. It also had similar problems to the Signal and wanted to get stuck, loads of force required to get the incomplete cut.

                      Böker Cop Tool Hook - PASS, CUM LAUDE
                      Wow, that hook actually works really well. Lots smoother than the Bullrush, not as good as the Fox Hook. Of the tested hooks probably the most useful (I have to put my Charge back together to test that hook).

                      coptool.jpg

                      1 Reply Last reply
                      0
                      • EtherealicerE
                        EtherealicerE
                        Etherealicer
                        Admin Team
                        wrote on last edited by Etherealicer
                        #11

                        Here it goes

                        Charge Rescue Hook - PASS
                        Works similar well to the Bullrush hook

                        charge.jpg

                        1 Reply Last reply
                        0
                        • styxS
                          styxS
                          styx
                          wrote on last edited by
                          #12

                          Nice testing. Glad to see that Spyderco Rescue has done good

                          1 Reply Last reply
                          0
                          • NixN
                            NixN
                            Nix
                            wrote on last edited by
                            #13

                            Great stuff, E! :tu: :like:

                            1 Reply Last reply
                            0
                            • eamoE
                              eamoE
                              eamo
                              wrote on last edited by
                              #14

                              Great job, thanks for the info; What was your test criteria ? As in, cut the belt with one pass vs having to cut a few times ? Stoked that the dragonfly done such a good job I'm trying to convince myself I need one 😄

                              I done something similar during the week by coincidence, though not as thorough or as well documented as your tests. One of my dogs ate both front seat-belts in my van a while ago and I had to replace them so after looking at them in my workshop I decided to see how my resqueme would cut the belt - it cut it but took a bit of work, I would not like to be using it under severe pressure.

                              My spyderco saver salt, cut through the belt in one go and the other knife I tried is a Palm Equipment folding serrated knife aimed at paddlers - it cut the belt but took a couple passes.

                              I only done this early in the week and was thinking of starting a thread, I hope you don't mind me adding my 2 cents to your thread ? :cheers:

                              1 Reply Last reply
                              0
                              • EtherealicerE
                                EtherealicerE
                                Etherealicer
                                Admin Team
                                wrote on last edited by
                                #15

                                @eamo said:
                                Great job, thanks for the info; What was your test criteria ? As in, cut the belt with one pass vs having to cut a few times ? Stoked that the dragonfly done such a good job I'm trying to convince myself I need one 😄

                                I done something similar during the week by coincidence, though not as thorough or as well documented as your tests. One of my dogs ate both front seat-belts in my van a while ago and I had to replace them so after looking at them in my workshop I decided to see how my resqueme would cut the belt - it cut it but took a bit of work, I would not like to be using it under severe pressure.

                                My spyderco saver salt, cut through the belt in one go and the other knife I tried is a Palm Equipment folding serrated knife aimed at paddlers - it cut the belt but took a couple passes.

                                I only done this early in the week and was thinking of starting a thread, I hope you don't mind me adding my 2 cents to your thread ? :cheers:

                                For a pass it was required that the belt is cut in one go. The grading is based on how easy it is and how much of the available real estate it required. While as a rule of thumb, knives that cut better give a cleaner cut, that is not a 100% correlation and I did NOT include the cleanness of the cut into the ranking. After all, if you are in a rescue situation you want the belt/rope/whatever cut and you don't care how clean the cut is, only how easy it is to cut it (especially if you have to cut in an awkward position, while battling panic).

                                The Dragonfly family is my favorite line from Sypderco, great little knives.

                                I think the Benchmade showed that a good knife is a good knife, no matter what you cut. What surprised me most is that serrations can get stuck.

                                P.S.: do you have a picture?

                                1 Reply Last reply
                                0
                                • ThePeacentT
                                  ThePeacentT
                                  ThePeacent
                                  wrote on last edited by
                                  #16

                                  excellent stuff, :salute:
                                  very good comparison :like:

                                  I am a fan of hook and rescue type blades and have read a lot on web and belt cutting.
                                  Factors to have in mind regarding the belt:

                                  1 - thickness, width, material

                                  2 - condition (wet, old, new) and positioning & retention (so that it stays firm as you cut it and doesn't flop or turn)

                                  regarding the blade:

                                  1 - serrations need to be *sharp *to cut well, and the pattern should be non-*spikey *(shallower teeth and scallops work better, hanging less) :tu:

                                  2 - the longer the blade the better and more powerful, with an obvious limit for dexterity and maneuverability :ahhh

                                  3 - Ideally the blade should be concave, not convex (the bellied blades allow the material to slip away, the curved blades grab it and won't release until it is cut thus the typical hook shape). Hawkbills are also excellent pull cutters for this reason :salute:

                                  4 - if the blade is a hook, the wider the sharpened area and the more surface between the spine and the edge, the more efficiently it will cut

                                  5 - if the blade is a hook, the thinner the behind-the-edge thickness and stock, the better it will cut, but we should not sacrifice strength ro rigidity

                                  6 - if the blade is straight (wharncliffe or sheepsfoot) a serration pattern will help in retaining the belt and avoiding slippage

                                  of course those may seem like obvious things ::) but there's a lot involving making a proper rescue balde and/or belt cutter
                                  Excellent testing and results!!! :cheers:

                                  My personal favorites are the SOG V-Cutter, the Lil'Matriarch, the DF2 Salt, the Spyderco Tasman and a Utility knife that I have with replaceable hook blades 🙂

                                  1 Reply Last reply
                                  0
                                  • Poncho65P
                                    Poncho65P
                                    Poncho65
                                    Global Moderators
                                    wrote on last edited by
                                    #17

                                    Excellent bunch of testing Eth :like: :like: I was surprised by some of the ones that didn't make the cut (pun intended 😄 ) and by others that did 😮 Will make choosing a rescue blade a bit less of a chore with all of these pics and results :salute: :tu:

                                    1 Reply Last reply
                                    0
                                    • eamoE
                                      eamoE
                                      eamo
                                      wrote on last edited by
                                      #18

                                      @Etherealicer said:
                                      P.S.: do you have a picture?

                                      Etherealicer pics are on the way, I'll try have some today.

                                      Peacent, great points - your observations on hawkbills intrigue me, I started a thread a few days (which you posted in, thanks), I'm trying to decide between a dragonfly salt hawkbill or a serrated blade . . . thing is i want a general use blade and feel the the serrated blade more suited . . . . decisions decisions . . . .

                                      1 Reply Last reply
                                      0
                                      • eamoE
                                        eamoE
                                        eamo
                                        wrote on last edited by
                                        #19

                                        Ok a picture as promised 🙂

                                        Top is Palm Equipment rescue knife - this took two goes to cut through the seatbelt, first cut about 80% and the second finished the job.

                                        Middle is the Spyderco Saver Salt - took one cut though theres was a thread or two left, these broke easily without needing a second run.

                                        Bottom the resqume - this was a chore, basically took about 40 seconds to cut through the seatbelt if thats all you have then it'll do the job. Possibly there is a technique to using it that I'm not aware of, more research needed.

                                        Finally, I had some tat lieing around (some old 10mm climbing rope) - the Palm knife needed 3 passes to finish the job, the Spyderco took 2 pretty much cut all the way through but left a piece of the outer sheath, i think if the blade was longer it'd do it in one go, but it's not and it didn't. Both knives cut clean.

                                        20180630_173000 copy.jpg

                                        1 Reply Last reply
                                        0
                                        • ThePeacentT
                                          ThePeacentT
                                          ThePeacent
                                          wrote on last edited by
                                          #20

                                          @eamo said:
                                          Bottom the resqume - this was a chore, basically took about 40 seconds to cut through the seatbelt if thats all you have then it'll do the job.** Possibly there is a technique to using it that I'm not aware of**, more research needed.

                                          you don't have to hit the belt with the hammer tip to get through it 😄

                                          PS: The DF Hawk has been a true success and a major hit for Spyderco this year, I'd love to put my hands on one!! :ahhh ::)

                                          1 Reply Last reply
                                          0

                                          Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                                          Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                                          With your input, this post could be even better 💗

                                          Register Login

                                          • Login

                                          • Don't have an account? Register

                                          • First post
                                            Last post
                                          0
                                          • Categories
                                          • Recent
                                          • Popular
                                          • World