Car boot finds
-
Good haul as usual

-
@Fuzzbucket said:
Hello... that bowl has potential!
I'm hoping it's Lignum vitae or I've just wasted 6quid on a hard slightly oval plastic ball

https://en.wikipedia.org/wiki/Lignum_vitae@Smashie
Yes Mate I'm happy with that lot :DAnd the BAK with the copper bail was made in 1939

-
Nice haul Tony !

-
Steve

So I thought I would give my oily <u>metal</u> tool cleaning procedure incase someone finds it useful
This it the first thing I do before going to harsher solvents
I put the tool in a container with a good amount of Washing powder (the stuff that goes in the clothes washing machine) and boiling water, then let it soak for an hour or two
Poke it about a bit with a brush now and then
Then I clean the parts off with dish soap if they are clean enough
or attack them with cream clenser (we used to call it Jiff here)
Once this is done if no more cleaning is required dry the bits off, you will get flash rusting if you are not carefulGive it a try it smells less than getting the petrol out ;)

-
Got my King Dick lubed up and working,

The Bahco 12" is lovely and the little pin vice is made by Eclipse

-
Great finds Tony

-
Hello... that bowl has potential!

I'm hoping it's Lignum vitae or I've just wasted 6quid on a hard slightly oval plastic ball

https://en.wikipedia.org/wiki/Lignum_vitae@Smashie
Yes Mate I'm happy with that lot :DAnd the BAK with the copper bail was made in 1939

That's what I was thinking.

-
@Sparky415 said:
Got my King Dick lubed up and working,
The Bahco 12" is lovely and the little pin vice is made by Eclipse

The KD ratchet is neat. You don't see many of those on this side of the pond. I have a half dozen 12 inch adjustables, but I wouldn't have passed that one up. Eclipse makes the best saws and gadgets. The pin vise is neat!
My questions today are about the big vise and the other chunk of rusty metal. What size and maker on the big vise? What is that other item with the chain? Also, another Mole grip? Finally, the handles in the lower left corner. Any history on them?
-
So the easy questions first, yes another pair of mole grips, I'm keeping this pair
The handles fit (some of?) our man hole covers here in the UK, easier/safer than jamming in two big screwdrivers :whistle:The vice I've not looked at yet but I'm glad you are here Yadda to ask about the other rusty thing! :salute:
It's an old Record 181 chain vice
https://www.sitebox.ltd.uk/irwin-record-chain-pipe-vice-ocv1181cVery much like this one...
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)
:cheers:
-
Hello... that bowl has potential!

I'm hoping it's Lignum vitae or I've just wasted 6quid on a hard slightly oval plastic ball

https://en.wikipedia.org/wiki/Lignum_vitae@Smashie
Yes Mate I'm happy with that lot :DAnd the BAK with the copper bail was made in 1939

That's what I was thinking.

I'm thinking knife scales, what were your thoughts?
I have seen people make mallets from them... -
@Sparky415 said:
So the easy questions first, yes another pair of mole grips, I'm keeping this pair
The handles fit (some of?) our man hole covers here in the UK, easier/safer than jamming in two big screwdrivers
The vice I've not looked at yet but I'm glad you are here Yadda to ask about the other rusty thing!

It's an old Record 181 chain vice
https://www.sitebox.ltd.uk/irwin-record-chain-pipe-vice-ocv1181cVery much like this one...
- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)

Neat! That would gave followed me home too!
-
They will hold odd shaped stuff as well as pipe, not fragile stuff though
Theres a fresh coat of paint on it drying at the moment ;) -
Hello... that bowl has potential!

I'm hoping it's Lignum vitae or I've just wasted 6quid on a hard slightly oval plastic ball

https://en.wikipedia.org/wiki/Lignum_vitae@Smashie
Yes Mate I'm happy with that lot :DAnd the BAK with the copper bail was made in 1939

That's what I was thinking.

I'm thinking knife scales, what were your thoughts?
I have seen people make mallets from them...I was thinking mallet. Knife scales would be absolutely lovely, but you'd go mad trying to make them... you'd end up topping yourself! :ahhh
-
Mad why? the wood is too hard to work with?

-
You could secure it to your bench with the chain vice. ;)
-
@Sparky415 said:
Mad why? the wood is too hard to work with?
From what I've heard, it's quite labour intensive to shape. I'm working with a chippy next week who's used it - I'll ask him for some pointers.

-
Thanks Mate, power tools at the ready,

-
I think you may need to stock up on cutting bits too! :ahhh
-
Nice haul Tony

We used to use lignum vitae in our liquid slip regulator tanks at work for crash plugs to stop the plates coming totally together. They were permanently submerged in a soda crystal and water solution that was always hot as a result of the current passed through the electrodes. I can't remember ever having to change any, they just lasted forever.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login