Need to understand "Rebar Love"
-
I'll tag along for a while at least, see if any others join in :hug: :D
I have to - I'll be on a road trip through northern Europe with the family for another week and I only brought the SOG PAD and the Rebar VX :D
-
D_T your official first day post started us off great. Sorry mine is a little late. I had to make some repairs to the under plating on our RV and break camp for the return trip home.. Vacation is ending once again. Any way my stock Rebar was helpful for the repairs. I've been carrying it all week on vacation, trying to get familiar with it before I put it to use at work. It has done well so far. I just have a hard time fumbling for the right tool. I'm to accustomed to my Swisstools. Hopefully this will get easier as I use the Rebar more.

-

Yay! I'm not alone :D
Hope the repairs went well Douglas
, have a safe trip 
-
@Dutch_Tooler said:
I'll tag along for a while at least, see if any others join in :hug: :DI have to - I'll be on a road trip through northern Europe with the family for another week and I only brought the SOG PAD and the Rebar VX :D
don't worry, Tim Leatherman did it 40 years ago with just a Boy Scouts Knife :D
-
I had a Rebar and wasn't crazy about the locking mechanisms or the tools on the inside aspect. Swapped it out for a Spirit and haven't looked back. The locking system, tools on the outside, butter blade and the fact that nobody bats an eye when I bring it out are all redeeming factors for me concerning the Spirit

-
Great pic and use Doug
I think you and DT will both have a great time with your Rebars

-
@ToolJoe said:
I had a Rebar and wasn't crazy about the locking mechanisms or the tools on the inside aspect. Swapped it out for a Spirit and haven't looked back. The locking system, tools on the outside, butter blade and the fact that nobody bats an eye when I bring it out are all redeeming factors for me concerning the Spirit
The Spirit needs no redemption; it's a great multi!

-
I had a Spirit and wasn't crazy about the fingernail breaking or the microscopic cutters. Swapped it out for a Rebar and haven't looked back. The locking system, tools on the inside, real cutter section, pointed blade and the fact that nobody gets blinded by the polish when I bring it out are all redeeming factors for me concerning the Rebar

FTFY. :D
-
Hi DT! Apologies as I just sold my brand new BO Rebar a couple of days ago and am now waiting for my used BO Rebar to arrive in a couple of weeks. I'm currently carrying my Wingman as EDC LM.
I hope it's still okay with you that I join the day my used Rebar arrives [emoji4]
-
@an0nemus said:
Hi DT! Apologies as I just sold my brand new BO Rebar a couple of days ago and am now waiting for my used BO Rebar to arrive in a couple of weeks. I'm currently carrying my Wingman as EDC LM.I hope it's still okay with you that I join the day my used Rebar arrives [emoji4]
Those qualify as extenuating circumstances in my book :D - I'm sure Douglas agrees

-
Day 2
Speaking about books, I have no doubt the Rebar (be it stock, or VX) would make a good companion in the type of scenery addressed in my vacation literature. See how well the BO handles blend in with the black cover, and the silver pivot heads vaguely reminiscent of rivets...

-
Rebar got a lot of use today. From removing phillips panel screws, calibrating thermostats to rewiring a walk-in freezer, now off to truck lighting and tailgate repairs.
Still fumbling with getting tools out but it was a little smoother today.![20180702_202426[12076].jpg](/assets/uploads/_imported_attachments/migrated/380238_20180702_202426%5B12076%5D.jpg)
-

Nice pic & uses Douglas

Day 3
I've just been reading up on the knife laws where I am now on vacation, and in view of the fact this is a national capital with lots of museums I have decided to not actually carry the Rebar around today.
This does not prevent in-house use, however :D. We're in a part of the hotel that hasn't yet undergone some planned renovations, and it shows. The knob on the cabinet needed tightening...
Note the tool shown is not Rebar standard. However, I'm sure the stock Phillips driver would have coped equally well.

-
Hah - found another loose knob. This room is falling apart >:D

-
Great pics and uses again guys

-
@Dutch_Tooler said:
Hah - found another loose knob. This room is falling apart >:D
MT use at it's finest
:D -
"Note the tool shown is not Rebar standard. However, I'm sure the stock Phillips driver would have coped equally well."
Yes it would. I like the stock Phillips for the added length and the narrow straight was just right for block connectors I used in previous job.
Douglas my tools loosened up with time through use during challenge for me.
Keep up the great reports.
-
Not entirely convinced by the durability of the furniture, I proceeded to check the tightness of the nuts and bolts holding the ceiling beams together. The impending renovation is unlikely to see these replaced, so I wanted to make doubly sure for the sake of any future guests. I needn't have bothered - these are as tight as they have been since the hotel was constructed with a slightly different purpose in mind, over 200 years ago: as a warehouse for goods to be shipped overseas. Note the size of the ceiling beams, designed to support floors capable of bearing all kinds of heavy goods (bulk and piece-wise). The bolts correspond to what is currently M16 in cross-section.


-
Sorry I'm late to the party. Although I have been rocking the Rebar for the past few days. Here is pic of it next to it's companion the Climber! One of the greatest sak/mt combos imo

-
Great contributions and uses so far.
Today the BO REBAR was paired up with a tanto blade CQC-7k

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login